view tests/test-status.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

  $ hg init repo1
  $ cd repo1
  $ mkdir a b a/1 b/1 b/2
  $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2

hg status in repo root:

  $ hg status
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

hg status . in repo root:

  $ hg status .
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

  $ hg status --cwd a
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a .
  ? 1/in_a_1
  ? in_a
  $ hg status --cwd a ..
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root

  $ hg status --cwd b
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b .
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  $ hg status --cwd b ..
  ? ../a/1/in_a_1
  ? ../a/in_a
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  ? ../in_root

  $ hg status --cwd a/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a/1 .
  ? in_a_1
  $ hg status --cwd a/1 ..
  ? in_a_1
  ? ../in_a

  $ hg status --cwd b/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/1 .
  ? in_b_1
  $ hg status --cwd b/1 ..
  ? in_b_1
  ? ../2/in_b_2
  ? ../in_b

  $ hg status --cwd b/2
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/2 .
  ? in_b_2
  $ hg status --cwd b/2 ..
  ? ../1/in_b_1
  ? in_b_2
  ? ../in_b

combining patterns with root and patterns without a root works

  $ hg st a/in_a re:.*b$
  ? a/in_a
  ? b/in_b

relative paths can be requested

  $ cat >> $HGRCPATH <<EOF
  > [commands]
  > status.relative = True
  > EOF
  $ hg status --cwd a
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root
  $ HGPLAIN=1 hg status --cwd a
  ? a/1/in_a_1 (glob)
  ? a/in_a (glob)
  ? b/1/in_b_1 (glob)
  ? b/2/in_b_2 (glob)
  ? b/in_b (glob)
  ? in_root

  $ cd ..

  $ hg init repo2
  $ cd repo2
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg ci -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch modified added unknown ignored
  $ hg add added
  $ hg remove removed
  $ rm deleted

hg status:

  $ hg status
  A added
  R removed
  ! deleted
  ? unknown

hg status modified added removed deleted unknown never-existed ignored:

  $ hg status modified added removed deleted unknown never-existed ignored
  never-existed: * (glob)
  A added
  R removed
  ! deleted
  ? unknown

  $ hg copy modified copied

hg status -C:

  $ hg status -C
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown

hg status -A:

  $ hg status -A
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown
  I ignored
  C .hgignore
  C modified

  $ hg status -A -Tjson
  [
   {
    "path": "added",
    "status": "A"
   },
   {
    "copy": "modified",
    "path": "copied",
    "status": "A"
   },
   {
    "path": "removed",
    "status": "R"
   },
   {
    "path": "deleted",
    "status": "!"
   },
   {
    "path": "unknown",
    "status": "?"
   },
   {
    "path": "ignored",
    "status": "I"
   },
   {
    "path": ".hgignore",
    "status": "C"
   },
   {
    "path": "modified",
    "status": "C"
   }
  ]

  $ hg status -A -Tpickle > pickle
  >>> from __future__ import print_function
  >>> import pickle
  >>> print(sorted((x['status'], x['path']) for x in pickle.load(open("pickle"))))
  [('!', 'deleted'), ('?', 'pickle'), ('?', 'unknown'), ('A', 'added'), ('A', 'copied'), ('C', '.hgignore'), ('C', 'modified'), ('I', 'ignored'), ('R', 'removed')]
  $ rm pickle

  $ echo "^ignoreddir$" > .hgignore
  $ mkdir ignoreddir
  $ touch ignoreddir/file

Test templater support:

  $ hg status -AT "[{status}]\t{if(copy, '{copy} -> ')}{path}\n"
  [M]	.hgignore
  [A]	added
  [A]	modified -> copied
  [R]	removed
  [!]	deleted
  [?]	ignored
  [?]	unknown
  [I]	ignoreddir/file
  [C]	modified
  $ hg status -AT default
  M .hgignore
  A added
  A copied
    modified
  R removed
  ! deleted
  ? ignored
  ? unknown
  I ignoreddir/file
  C modified
  $ hg status -T compact
  abort: "status" not in template map
  [255]

hg status ignoreddir/file:

  $ hg status ignoreddir/file

hg status -i ignoreddir/file:

  $ hg status -i ignoreddir/file
  I ignoreddir/file
  $ cd ..

Check 'status -q' and some combinations

  $ hg init repo3
  $ cd repo3
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg commit -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch added unknown ignored
  $ hg add added
  $ echo "test" >> modified
  $ hg remove removed
  $ rm deleted
  $ hg copy modified copied

Specify working directory revision explicitly, that should be the same as
"hg status"

  $ hg status --change "wdir()"
  M modified
  A added
  A copied
  R removed
  ! deleted
  ? unknown

Run status with 2 different flags.
Check if result is the same or different.
If result is not as expected, raise error

  $ assert() {
  >     hg status $1 > ../a
  >     hg status $2 > ../b
  >     if diff ../a ../b > /dev/null; then
  >         out=0
  >     else
  >         out=1
  >     fi
  >     if [ $3 -eq 0 ]; then
  >         df="same"
  >     else
  >         df="different"
  >     fi
  >     if [ $out -ne $3 ]; then
  >         echo "Error on $1 and $2, should be $df."
  >     fi
  > }

Assert flag1 flag2 [0-same | 1-different]

  $ assert "-q" "-mard"      0
  $ assert "-A" "-marduicC"  0
  $ assert "-qA" "-mardcC"   0
  $ assert "-qAui" "-A"      0
  $ assert "-qAu" "-marducC" 0
  $ assert "-qAi" "-mardicC" 0
  $ assert "-qu" "-u"        0
  $ assert "-q" "-u"         1
  $ assert "-m" "-a"         1
  $ assert "-r" "-d"         1
  $ cd ..

  $ hg init repo4
  $ cd repo4
  $ touch modified removed deleted
  $ hg ci -q -A -m 'initial checkin'
  $ touch added unknown
  $ hg add added
  $ hg remove removed
  $ rm deleted
  $ echo x > modified
  $ hg copy modified copied
  $ hg ci -m 'test checkin' -d "1000001 0"
  $ rm *
  $ touch unrelated
  $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0"

hg status --change 1:

  $ hg status --change 1
  M modified
  A added
  A copied
  R removed

hg status --change 1 unrelated:

  $ hg status --change 1 unrelated

hg status -C --change 1 added modified copied removed deleted:

  $ hg status -C --change 1 added modified copied removed deleted
  M modified
  A added
  A copied
    modified
  R removed

hg status -A --change 1 and revset:

  $ hg status -A --change '1|1'
  M modified
  A added
  A copied
    modified
  R removed
  C deleted

  $ cd ..

hg status with --rev and reverted changes:

  $ hg init reverted-changes-repo
  $ cd reverted-changes-repo
  $ echo a > file
  $ hg add file
  $ hg ci -m a
  $ echo b > file
  $ hg ci -m b

reverted file should appear clean

  $ hg revert -r 0 .
  reverting file
  $ hg status -A --rev 0
  C file

#if execbit
reverted file with changed flag should appear modified

  $ chmod +x file
  $ hg status -A --rev 0
  M file

  $ hg revert -r 0 .
  reverting file

reverted and committed file with changed flag should appear modified

  $ hg co -C .
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ chmod +x file
  $ hg ci -m 'change flag'
  $ hg status -A --rev 1 --rev 2
  M file
  $ hg diff -r 1 -r 2

#endif

  $ cd ..

hg status of binary file starting with '\1\n', a separator for metadata:

  $ hg init repo5
  $ cd repo5
  >>> open("010a", "wb").write("\1\nfoo")
  $ hg ci -q -A -m 'initial checkin'
  $ hg status -A
  C 010a

  >>> open("010a", "wb").write("\1\nbar")
  $ hg status -A
  M 010a
  $ hg ci -q -m 'modify 010a'
  $ hg status -A --rev 0:1
  M 010a

  $ touch empty
  $ hg ci -q -A -m 'add another file'
  $ hg status -A --rev 1:2 010a
  C 010a

  $ cd ..

test "hg status" with "directory pattern" which matches against files
only known on target revision.

  $ hg init repo6
  $ cd repo6

  $ echo a > a.txt
  $ hg add a.txt
  $ hg commit -m '#0'
  $ mkdir -p 1/2/3/4/5
  $ echo b > 1/2/3/4/5/b.txt
  $ hg add 1/2/3/4/5/b.txt
  $ hg commit -m '#1'

  $ hg update -C 0 > /dev/null
  $ hg status -A
  C a.txt

the directory matching against specified pattern should be removed,
because directory existence prevents 'dirstate.walk()' from showing
warning message about such pattern.

  $ test ! -d 1
  $ hg status -A --rev 1 1/2/3/4/5/b.txt
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3/4/5
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1
  R 1/2/3/4/5/b.txt

  $ hg status --config ui.formatdebug=True --rev 1 1
  status = [
      {*'path': '1/2/3/4/5/b.txt'*}, (glob)
  ]

#if windows
  $ hg --config ui.slash=false status -A --rev 1 1
  R 1\2\3\4\5\b.txt
#endif

  $ cd ..

Status after move overwriting a file (issue4458)
=================================================


  $ hg init issue4458
  $ cd issue4458
  $ echo a > a
  $ echo b > b
  $ hg commit -Am base
  adding a
  adding b


with --force

  $ hg mv b --force a
  $ hg st --copies
  M a
    b
  R b
  $ hg revert --all
  reverting a
  undeleting b
  $ rm *.orig

without force

  $ hg rm a
  $ hg st --copies
  R a
  $ hg mv b a
  $ hg st --copies
  M a
    b
  R b

using ui.statuscopies setting
  $ hg st --config ui.statuscopies=true
  M a
    b
  R b
  $ hg st --config ui.statuscopies=false
  M a
  R b

using log status template (issue5155)
  $ hg log -Tstatus -r 'wdir()' -C
  changeset:   2147483647:ffffffffffff
  parent:      0:8c55c58b4c0e
  user:        test
  date:        * (glob)
  files:
  M a
    b
  R b
  

Other "bug" highlight, the revision status does not report the copy information.
This is buggy behavior.

  $ hg commit -m 'blah'
  $ hg st --copies --change .
  M a
  R b

using log status template, the copy information is displayed correctly.
  $ hg log -Tstatus -r. -C
  changeset:   1:6685fde43d21
  tag:         tip
  user:        test
  date:        * (glob)
  summary:     blah
  files:
  M a
    b
  R b
  

  $ cd ..