view tests/test-url.py @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

# coding=utf-8
from __future__ import absolute_import, print_function

import doctest
import os

def check(a, b):
    if a != b:
        print((a, b))

def cert(cn):
    return {'subject': ((('commonName', cn),),)}

from mercurial import (
    sslutil,
)

_verifycert = sslutil._verifycert
# Test non-wildcard certificates
check(_verifycert(cert('example.com'), 'example.com'),
      None)
check(_verifycert(cert('example.com'), 'www.example.com'),
      'certificate is for example.com')
check(_verifycert(cert('www.example.com'), 'example.com'),
      'certificate is for www.example.com')

# Test wildcard certificates
check(_verifycert(cert('*.example.com'), 'www.example.com'),
      None)
check(_verifycert(cert('*.example.com'), 'example.com'),
      'certificate is for *.example.com')
check(_verifycert(cert('*.example.com'), 'w.w.example.com'),
      'certificate is for *.example.com')

# Test subjectAltName
san_cert = {'subject': ((('commonName', 'example.com'),),),
            'subjectAltName': (('DNS', '*.example.net'),
                               ('DNS', 'example.net'))}
check(_verifycert(san_cert, 'example.net'),
      None)
check(_verifycert(san_cert, 'foo.example.net'),
      None)
# no fallback to subject commonName when subjectAltName has DNS
check(_verifycert(san_cert, 'example.com'),
      'certificate is for *.example.net, example.net')
# fallback to subject commonName when no DNS in subjectAltName
san_cert = {'subject': ((('commonName', 'example.com'),),),
            'subjectAltName': (('IP Address', '8.8.8.8'),)}
check(_verifycert(san_cert, 'example.com'), None)

# Avoid some pitfalls
check(_verifycert(cert('*.foo'), 'foo'),
      'certificate is for *.foo')
check(_verifycert(cert('*o'), 'foo'), None)

check(_verifycert({'subject': ()},
                  'example.com'),
      'no commonName or subjectAltName found in certificate')
check(_verifycert(None, 'example.com'),
      'no certificate received')

# Unicode (IDN) certname isn't supported
check(_verifycert(cert(u'\u4f8b.jp'), 'example.jp'),
      'IDN in certificate not supported')

# The following tests are from CPython's test_ssl.py.
check(_verifycert(cert('example.com'), 'example.com'), None)
check(_verifycert(cert('example.com'), 'ExAmple.cOm'), None)
check(_verifycert(cert('example.com'), 'www.example.com'),
      'certificate is for example.com')
check(_verifycert(cert('example.com'), '.example.com'),
      'certificate is for example.com')
check(_verifycert(cert('example.com'), 'example.org'),
      'certificate is for example.com')
check(_verifycert(cert('example.com'), 'exampleXcom'),
      'certificate is for example.com')
check(_verifycert(cert('*.a.com'), 'foo.a.com'), None)
check(_verifycert(cert('*.a.com'), 'bar.foo.a.com'),
      'certificate is for *.a.com')
check(_verifycert(cert('*.a.com'), 'a.com'),
      'certificate is for *.a.com')
check(_verifycert(cert('*.a.com'), 'Xa.com'),
      'certificate is for *.a.com')
check(_verifycert(cert('*.a.com'), '.a.com'),
      'certificate is for *.a.com')

# only match one left-most wildcard
check(_verifycert(cert('f*.com'), 'foo.com'), None)
check(_verifycert(cert('f*.com'), 'f.com'), None)
check(_verifycert(cert('f*.com'), 'bar.com'),
      'certificate is for f*.com')
check(_verifycert(cert('f*.com'), 'foo.a.com'),
      'certificate is for f*.com')
check(_verifycert(cert('f*.com'), 'bar.foo.com'),
      'certificate is for f*.com')

# NULL bytes are bad, CVE-2013-4073
check(_verifycert(cert('null.python.org\x00example.org'),
                  'null.python.org\x00example.org'), None)
check(_verifycert(cert('null.python.org\x00example.org'),
                  'example.org'),
      'certificate is for null.python.org\x00example.org')
check(_verifycert(cert('null.python.org\x00example.org'),
                  'null.python.org'),
      'certificate is for null.python.org\x00example.org')

# error cases with wildcards
check(_verifycert(cert('*.*.a.com'), 'bar.foo.a.com'),
      'certificate is for *.*.a.com')
check(_verifycert(cert('*.*.a.com'), 'a.com'),
      'certificate is for *.*.a.com')
check(_verifycert(cert('*.*.a.com'), 'Xa.com'),
      'certificate is for *.*.a.com')
check(_verifycert(cert('*.*.a.com'), '.a.com'),
      'certificate is for *.*.a.com')

check(_verifycert(cert('a.*.com'), 'a.foo.com'),
      'certificate is for a.*.com')
check(_verifycert(cert('a.*.com'), 'a..com'),
      'certificate is for a.*.com')
check(_verifycert(cert('a.*.com'), 'a.com'),
      'certificate is for a.*.com')

# wildcard doesn't match IDNA prefix 'xn--'
idna = u'püthon.python.org'.encode('idna').decode('ascii')
check(_verifycert(cert(idna), idna), None)
check(_verifycert(cert('x*.python.org'), idna),
      'certificate is for x*.python.org')
check(_verifycert(cert('xn--p*.python.org'), idna),
      'certificate is for xn--p*.python.org')

# wildcard in first fragment and  IDNA A-labels in sequent fragments
# are supported.
idna = u'www*.pythön.org'.encode('idna').decode('ascii')
check(_verifycert(cert(idna),
                  u'www.pythön.org'.encode('idna').decode('ascii')),
      None)
check(_verifycert(cert(idna),
                  u'www1.pythön.org'.encode('idna').decode('ascii')),
      None)
check(_verifycert(cert(idna),
                  u'ftp.pythön.org'.encode('idna').decode('ascii')),
      'certificate is for www*.xn--pythn-mua.org')
check(_verifycert(cert(idna),
                  u'pythön.org'.encode('idna').decode('ascii')),
      'certificate is for www*.xn--pythn-mua.org')

c = {
    'notAfter': 'Jun 26 21:41:46 2011 GMT',
    'subject': (((u'commonName', u'linuxfrz.org'),),),
    'subjectAltName': (
        ('DNS', 'linuxfr.org'),
        ('DNS', 'linuxfr.com'),
        ('othername', '<unsupported>'),
    )
}
check(_verifycert(c, 'linuxfr.org'), None)
check(_verifycert(c, 'linuxfr.com'), None)
# Not a "DNS" entry
check(_verifycert(c, '<unsupported>'),
      'certificate is for linuxfr.org, linuxfr.com')
# When there is a subjectAltName, commonName isn't used
check(_verifycert(c, 'linuxfrz.org'),
      'certificate is for linuxfr.org, linuxfr.com')

# A pristine real-world example
c = {
    'notAfter': 'Dec 18 23:59:59 2011 GMT',
    'subject': (
        ((u'countryName', u'US'),),
        ((u'stateOrProvinceName', u'California'),),
        ((u'localityName', u'Mountain View'),),
        ((u'organizationName', u'Google Inc'),),
        ((u'commonName', u'mail.google.com'),),
    ),
}
check(_verifycert(c, 'mail.google.com'), None)
check(_verifycert(c, 'gmail.com'), 'certificate is for mail.google.com')

# Only commonName is considered
check(_verifycert(c, 'California'), 'certificate is for mail.google.com')

# Neither commonName nor subjectAltName
c = {
    'notAfter': 'Dec 18 23:59:59 2011 GMT',
    'subject': (
        ((u'countryName', u'US'),),
        ((u'stateOrProvinceName', u'California'),),
        ((u'localityName', u'Mountain View'),),
        ((u'organizationName', u'Google Inc'),),
    ),
}
check(_verifycert(c, 'mail.google.com'),
      'no commonName or subjectAltName found in certificate')

# No DNS entry in subjectAltName but a commonName
c = {
    'notAfter': 'Dec 18 23:59:59 2099 GMT',
    'subject': (
        ((u'countryName', u'US'),),
        ((u'stateOrProvinceName', u'California'),),
        ((u'localityName', u'Mountain View'),),
        ((u'commonName', u'mail.google.com'),),
    ),
    'subjectAltName': (('othername', 'blabla'),),
}
check(_verifycert(c, 'mail.google.com'), None)

# No DNS entry subjectAltName and no commonName
c = {
    'notAfter': 'Dec 18 23:59:59 2099 GMT',
    'subject': (
        ((u'countryName', u'US'),),
        ((u'stateOrProvinceName', u'California'),),
        ((u'localityName', u'Mountain View'),),
        ((u'organizationName', u'Google Inc'),),
    ),
    'subjectAltName': (('othername', 'blabla'),),
}
check(_verifycert(c, 'google.com'),
      'no commonName or subjectAltName found in certificate')

# Empty cert / no cert
check(_verifycert(None, 'example.com'), 'no certificate received')
check(_verifycert({}, 'example.com'), 'no certificate received')

# avoid denials of service by refusing more than one
# wildcard per fragment.
check(_verifycert({'subject': (((u'commonName', u'a*b.com'),),)},
                  'axxb.com'), None)
check(_verifycert({'subject': (((u'commonName', u'a*b.co*'),),)},
                  'axxb.com'), 'certificate is for a*b.co*')
check(_verifycert({'subject': (((u'commonName', u'a*b*.com'),),)},
                  'axxbxxc.com'),
      'too many wildcards in certificate DNS name: a*b*.com')

def test_url():
    """
    >>> from mercurial.util import url

    This tests for edge cases in url.URL's parsing algorithm. Most of
    these aren't useful for documentation purposes, so they aren't
    part of the class's doc tests.

    Query strings and fragments:

    >>> url('http://host/a?b#c')
    <url scheme: 'http', host: 'host', path: 'a', query: 'b', fragment: 'c'>
    >>> url('http://host/a?')
    <url scheme: 'http', host: 'host', path: 'a'>
    >>> url('http://host/a#b#c')
    <url scheme: 'http', host: 'host', path: 'a', fragment: 'b#c'>
    >>> url('http://host/a#b?c')
    <url scheme: 'http', host: 'host', path: 'a', fragment: 'b?c'>
    >>> url('http://host/?a#b')
    <url scheme: 'http', host: 'host', path: '', query: 'a', fragment: 'b'>
    >>> url('http://host/?a#b', parsequery=False)
    <url scheme: 'http', host: 'host', path: '?a', fragment: 'b'>
    >>> url('http://host/?a#b', parsefragment=False)
    <url scheme: 'http', host: 'host', path: '', query: 'a#b'>
    >>> url('http://host/?a#b', parsequery=False, parsefragment=False)
    <url scheme: 'http', host: 'host', path: '?a#b'>

    IPv6 addresses:

    >>> url('ldap://[2001:db8::7]/c=GB?objectClass?one')
    <url scheme: 'ldap', host: '[2001:db8::7]', path: 'c=GB',
         query: 'objectClass?one'>
    >>> url('ldap://joe:xxx@[2001:db8::7]:80/c=GB?objectClass?one')
    <url scheme: 'ldap', user: 'joe', passwd: 'xxx', host: '[2001:db8::7]',
         port: '80', path: 'c=GB', query: 'objectClass?one'>

    Missing scheme, host, etc.:

    >>> url('://192.0.2.16:80/')
    <url path: '://192.0.2.16:80/'>
    >>> url('https://mercurial-scm.org')
    <url scheme: 'https', host: 'mercurial-scm.org'>
    >>> url('/foo')
    <url path: '/foo'>
    >>> url('bundle:/foo')
    <url scheme: 'bundle', path: '/foo'>
    >>> url('a?b#c')
    <url path: 'a?b', fragment: 'c'>
    >>> url('http://x.com?arg=/foo')
    <url scheme: 'http', host: 'x.com', query: 'arg=/foo'>
    >>> url('http://joe:xxx@/foo')
    <url scheme: 'http', user: 'joe', passwd: 'xxx', path: 'foo'>

    Just a scheme and a path:

    >>> url('mailto:[e-mail]')
    <url scheme: 'mailto', path: '[e-mail]'>
    >>> url('a:b:c:d')
    <url path: 'a:b:c:d'>
    >>> url('aa:bb:cc:dd')
    <url scheme: 'aa', path: 'bb:cc:dd'>

    SSH examples:

    >>> url('ssh://joe@host//home/joe')
    <url scheme: 'ssh', user: 'joe', host: 'host', path: '/home/joe'>
    >>> url('ssh://joe:xxx@host/src')
    <url scheme: 'ssh', user: 'joe', passwd: 'xxx', host: 'host', path: 'src'>
    >>> url('ssh://joe:xxx@host')
    <url scheme: 'ssh', user: 'joe', passwd: 'xxx', host: 'host'>
    >>> url('ssh://joe@host')
    <url scheme: 'ssh', user: 'joe', host: 'host'>
    >>> url('ssh://host')
    <url scheme: 'ssh', host: 'host'>
    >>> url('ssh://')
    <url scheme: 'ssh'>
    >>> url('ssh:')
    <url scheme: 'ssh'>

    Non-numeric port:

    >>> url('http://example.com:dd')
    <url scheme: 'http', host: 'example.com', port: 'dd'>
    >>> url('ssh://joe:xxx@host:ssh/foo')
    <url scheme: 'ssh', user: 'joe', passwd: 'xxx', host: 'host', port: 'ssh',
         path: 'foo'>

    Bad authentication credentials:

    >>> url('http://joe@joeville:123@4:@host/a?b#c')
    <url scheme: 'http', user: 'joe@joeville', passwd: '123@4:',
         host: 'host', path: 'a', query: 'b', fragment: 'c'>
    >>> url('http://!*#?/@!*#?/:@host/a?b#c')
    <url scheme: 'http', host: '!*', fragment: '?/@!*#?/:@host/a?b#c'>
    >>> url('http://!*#?@!*#?:@host/a?b#c')
    <url scheme: 'http', host: '!*', fragment: '?@!*#?:@host/a?b#c'>
    >>> url('http://!*@:!*@@host/a?b#c')
    <url scheme: 'http', user: '!*@', passwd: '!*@', host: 'host',
         path: 'a', query: 'b', fragment: 'c'>

    File paths:

    >>> url('a/b/c/d.g.f')
    <url path: 'a/b/c/d.g.f'>
    >>> url('/x///z/y/')
    <url path: '/x///z/y/'>
    >>> url('/foo:bar')
    <url path: '/foo:bar'>
    >>> url('\\\\foo:bar')
    <url path: '\\\\foo:bar'>
    >>> url('./foo:bar')
    <url path: './foo:bar'>

    Non-localhost file URL:

    >>> u = url('file://mercurial-scm.org/foo')
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
    Abort: file:// URLs can only refer to localhost

    Empty URL:

    >>> u = url('')
    >>> u
    <url path: ''>
    >>> str(u)
    ''

    Empty path with query string:

    >>> str(url('http://foo/?bar'))
    'http://foo/?bar'

    Invalid path:

    >>> u = url('http://foo/bar')
    >>> u.path = 'bar'
    >>> str(u)
    'http://foo/bar'

    >>> u = url('file:/foo/bar/baz')
    >>> u
    <url scheme: 'file', path: '/foo/bar/baz'>
    >>> str(u)
    'file:///foo/bar/baz'
    >>> u.localpath()
    '/foo/bar/baz'

    >>> u = url('file:///foo/bar/baz')
    >>> u
    <url scheme: 'file', path: '/foo/bar/baz'>
    >>> str(u)
    'file:///foo/bar/baz'
    >>> u.localpath()
    '/foo/bar/baz'

    >>> u = url('file:///f:oo/bar/baz')
    >>> u
    <url scheme: 'file', path: 'f:oo/bar/baz'>
    >>> str(u)
    'file:///f:oo/bar/baz'
    >>> u.localpath()
    'f:oo/bar/baz'

    >>> u = url('file://localhost/f:oo/bar/baz')
    >>> u
    <url scheme: 'file', host: 'localhost', path: 'f:oo/bar/baz'>
    >>> str(u)
    'file://localhost/f:oo/bar/baz'
    >>> u.localpath()
    'f:oo/bar/baz'

    >>> u = url('file:foo/bar/baz')
    >>> u
    <url scheme: 'file', path: 'foo/bar/baz'>
    >>> str(u)
    'file:foo/bar/baz'
    >>> u.localpath()
    'foo/bar/baz'
    """

if 'TERM' in os.environ:
    del os.environ['TERM']

doctest.testmod(optionflags=doctest.NORMALIZE_WHITESPACE)