view tests/tinyproxy.py @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

#!/usr/bin/env python

from __future__ import absolute_import, print_function

__doc__ = """Tiny HTTP Proxy.

This module implements GET, HEAD, POST, PUT and DELETE methods
on BaseHTTPServer, and behaves as an HTTP proxy.  The CONNECT
method is also implemented experimentally, but has not been
tested yet.

Any help will be greatly appreciated.           SUZUKI Hisao
"""

__version__ = "0.2.1"

import optparse
import os
import select
import socket
import sys

from mercurial import util

httpserver = util.httpserver
socketserver = util.socketserver
urlreq = util.urlreq

if os.environ.get('HGIPV6', '0') == '1':
    family = socket.AF_INET6
else:
    family = socket.AF_INET

class ProxyHandler (httpserver.basehttprequesthandler):
    __base = httpserver.basehttprequesthandler
    __base_handle = __base.handle

    server_version = "TinyHTTPProxy/" + __version__
    rbufsize = 0                        # self.rfile Be unbuffered

    def handle(self):
        (ip, port) = self.client_address
        allowed = getattr(self, 'allowed_clients', None)
        if allowed is not None and ip not in allowed:
            self.raw_requestline = self.rfile.readline()
            if self.parse_request():
                self.send_error(403)
        else:
            self.__base_handle()

    def log_request(self, code='-', size='-'):
        xheaders = [h for h in self.headers.items() if h[0].startswith('x-')]
        self.log_message('"%s" %s %s%s',
                         self.requestline, str(code), str(size),
                         ''.join([' %s:%s' % h for h in sorted(xheaders)]))

    def _connect_to(self, netloc, soc):
        i = netloc.find(':')
        if i >= 0:
            host_port = netloc[:i], int(netloc[i + 1:])
        else:
            host_port = netloc, 80
        print("\t" "connect to %s:%d" % host_port)
        try: soc.connect(host_port)
        except socket.error as arg:
            try: msg = arg[1]
            except (IndexError, TypeError): msg = arg
            self.send_error(404, msg)
            return 0
        return 1

    def do_CONNECT(self):
        soc = socket.socket(family, socket.SOCK_STREAM)
        try:
            if self._connect_to(self.path, soc):
                self.log_request(200)
                self.wfile.write(self.protocol_version +
                                 " 200 Connection established\r\n")
                self.wfile.write("Proxy-agent: %s\r\n" % self.version_string())
                self.wfile.write("\r\n")
                self._read_write(soc, 300)
        finally:
            print("\t" "bye")
            soc.close()
            self.connection.close()

    def do_GET(self):
        (scm, netloc, path, params, query, fragment) = urlreq.urlparse(
            self.path, 'http')
        if scm != 'http' or fragment or not netloc:
            self.send_error(400, "bad url %s" % self.path)
            return
        soc = socket.socket(family, socket.SOCK_STREAM)
        try:
            if self._connect_to(netloc, soc):
                self.log_request()
                soc.send("%s %s %s\r\n" % (
                    self.command,
                    urlreq.urlunparse(('', '', path, params, query, '')),
                    self.request_version))
                self.headers['Connection'] = 'close'
                del self.headers['Proxy-Connection']
                for key_val in self.headers.items():
                    soc.send("%s: %s\r\n" % key_val)
                soc.send("\r\n")
                self._read_write(soc)
        finally:
            print("\t" "bye")
            soc.close()
            self.connection.close()

    def _read_write(self, soc, max_idling=20):
        iw = [self.connection, soc]
        ow = []
        count = 0
        while True:
            count += 1
            (ins, _, exs) = select.select(iw, ow, iw, 3)
            if exs:
                break
            if ins:
                for i in ins:
                    if i is soc:
                        out = self.connection
                    else:
                        out = soc
                    try:
                        data = i.recv(8192)
                    except socket.error:
                        break
                    if data:
                        out.send(data)
                        count = 0
            else:
                print("\t" "idle", count)
            if count == max_idling:
                break

    do_HEAD = do_GET
    do_POST = do_GET
    do_PUT  = do_GET
    do_DELETE = do_GET

class ThreadingHTTPServer (socketserver.ThreadingMixIn,
                           httpserver.httpserver):
    def __init__(self, *args, **kwargs):
        httpserver.httpserver.__init__(self, *args, **kwargs)
        a = open("proxy.pid", "w")
        a.write(str(os.getpid()) + "\n")
        a.close()

def runserver(port=8000, bind=""):
    server_address = (bind, port)
    ProxyHandler.protocol_version = "HTTP/1.0"
    httpd = ThreadingHTTPServer(server_address, ProxyHandler)
    sa = httpd.socket.getsockname()
    print("Serving HTTP on", sa[0], "port", sa[1], "...")
    try:
        httpd.serve_forever()
    except KeyboardInterrupt:
        print("\nKeyboard interrupt received, exiting.")
        httpd.server_close()
        sys.exit(0)

if __name__ == '__main__':
    argv = sys.argv
    if argv[1:] and argv[1] in ('-h', '--help'):
        print(argv[0], "[port [allowed_client_name ...]]")
    else:
        if argv[2:]:
            allowed = []
            for name in argv[2:]:
                client = socket.gethostbyname(name)
                allowed.append(client)
                print("Accept: %s (%s)" % (client, name))
            ProxyHandler.allowed_clients = allowed
            del argv[2:]
        else:
            print("Any clients will be served...")

        parser = optparse.OptionParser()
        parser.add_option('-b', '--bind', metavar='ADDRESS',
                          help='Specify alternate bind address '
                               '[default: all interfaces]', default='')
        (options, args) = parser.parse_args()
        port = 8000
        if len(args) == 1:
            port = int(args[0])
        runserver(port, options.bind)