stream-clone: stop getting the file size of all file in v3
The point of v3 is to do less work in the locked section. It was currently not
the case.
This significantly boost performance. The following number comes from a large
private repository using perf::stream-locked-section:
base-line: 35.03 seconds
this-change: 24.50 seconds (-30%)
# Copyright 21 May 2005 - (c) 2005 Jake Edge <jake@edge2.net>
# Copyright 2005-2007 Olivia Mackall <olivia@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
import contextlib
import struct
import threading
from .i18n import _
from . import (
encoding,
error,
pycompat,
util,
wireprototypes,
wireprotov1server,
)
from .interfaces import util as interfaceutil
from .utils import (
compression,
stringutil,
)
stringio = util.stringio
urlerr = util.urlerr
urlreq = util.urlreq
HTTP_OK = 200
HGTYPE = b'application/mercurial-0.1'
HGTYPE2 = b'application/mercurial-0.2'
HGERRTYPE = b'application/hg-error'
SSHV1 = wireprototypes.SSHV1
def decodevaluefromheaders(req, headerprefix):
"""Decode a long value from multiple HTTP request headers.
Returns the value as a bytes, not a str.
"""
chunks = []
i = 1
while True:
v = req.headers.get(b'%s-%d' % (headerprefix, i))
if v is None:
break
chunks.append(pycompat.bytesurl(v))
i += 1
return b''.join(chunks)
@interfaceutil.implementer(wireprototypes.baseprotocolhandler)
class httpv1protocolhandler:
def __init__(self, req, ui, checkperm):
self._req = req
self._ui = ui
self._checkperm = checkperm
self._protocaps = None
@property
def name(self):
return b'http-v1'
def getargs(self, args):
knownargs = self._args()
data = {}
keys = args.split()
for k in keys:
if k == b'*':
star = {}
for key in knownargs.keys():
if key != b'cmd' and key not in keys:
star[key] = knownargs[key][0]
data[b'*'] = star
else:
data[k] = knownargs[k][0]
return [data[k] for k in keys]
def _args(self):
args = self._req.qsparams.asdictoflists()
postlen = int(self._req.headers.get(b'X-HgArgs-Post', 0))
if postlen:
args.update(
urlreq.parseqs(
self._req.bodyfh.read(postlen), keep_blank_values=True
)
)
return args
argvalue = decodevaluefromheaders(self._req, b'X-HgArg')
args.update(urlreq.parseqs(argvalue, keep_blank_values=True))
return args
def getprotocaps(self):
if self._protocaps is None:
value = decodevaluefromheaders(self._req, b'X-HgProto')
self._protocaps = set(value.split(b' '))
return self._protocaps
def getpayload(self):
# Existing clients *always* send Content-Length.
length = int(self._req.headers[b'Content-Length'])
# If httppostargs is used, we need to read Content-Length
# minus the amount that was consumed by args.
length -= int(self._req.headers.get(b'X-HgArgs-Post', 0))
return util.filechunkiter(self._req.bodyfh, limit=length)
@contextlib.contextmanager
def mayberedirectstdio(self):
oldout = self._ui.fout
olderr = self._ui.ferr
out = util.stringio()
try:
self._ui.fout = out
self._ui.ferr = out
yield out
finally:
self._ui.fout = oldout
self._ui.ferr = olderr
def client(self):
return b'remote:%s:%s:%s' % (
self._req.urlscheme,
urlreq.quote(self._req.remotehost or b''),
urlreq.quote(self._req.remoteuser or b''),
)
def addcapabilities(self, repo, caps):
caps.append(b'batch')
caps.append(
b'httpheader=%d' % repo.ui.configint(b'server', b'maxhttpheaderlen')
)
if repo.ui.configbool(b'experimental', b'httppostargs'):
caps.append(b'httppostargs')
# FUTURE advertise 0.2rx once support is implemented
# FUTURE advertise minrx and mintx after consulting config option
caps.append(b'httpmediatype=0.1rx,0.1tx,0.2tx')
compengines = wireprototypes.supportedcompengines(
repo.ui, compression.SERVERROLE
)
if compengines:
comptypes = b','.join(
urlreq.quote(e.wireprotosupport().name) for e in compengines
)
caps.append(b'compression=%s' % comptypes)
return caps
def checkperm(self, perm):
return self._checkperm(perm)
# This method exists mostly so that extensions like remotefilelog can
# disable a kludgey legacy method only over http. As of early 2018,
# there are no other known users, so with any luck we can discard this
# hook if remotefilelog becomes a first-party extension.
def iscmd(cmd):
return cmd in wireprotov1server.commands
def handlewsgirequest(rctx, req, res, checkperm):
"""Possibly process a wire protocol request.
If the current request is a wire protocol request, the request is
processed by this function.
``req`` is a ``parsedrequest`` instance.
``res`` is a ``wsgiresponse`` instance.
Returns a bool indicating if the request was serviced. If set, the caller
should stop processing the request, as a response has already been issued.
"""
# Avoid cycle involving hg module.
from .hgweb import common as hgwebcommon
repo = rctx.repo
# HTTP version 1 wire protocol requests are denoted by a "cmd" query
# string parameter. If it isn't present, this isn't a wire protocol
# request.
if b'cmd' not in req.qsparams:
return False
cmd = req.qsparams[b'cmd']
# The "cmd" request parameter is used by both the wire protocol and hgweb.
# While not all wire protocol commands are available for all transports,
# if we see a "cmd" value that resembles a known wire protocol command, we
# route it to a protocol handler. This is better than routing possible
# wire protocol requests to hgweb because it prevents hgweb from using
# known wire protocol commands and it is less confusing for machine
# clients.
if not iscmd(cmd):
return False
# The "cmd" query string argument is only valid on the root path of the
# repo. e.g. ``/?cmd=foo``, ``/repo?cmd=foo``. URL paths within the repo
# like ``/blah?cmd=foo`` are not allowed. So don't recognize the request
# in this case. We send an HTTP 404 for backwards compatibility reasons.
if req.dispatchpath:
res.status = hgwebcommon.statusmessage(404)
res.headers[b'Content-Type'] = HGTYPE
# TODO This is not a good response to issue for this request. This
# is mostly for BC for now.
res.setbodybytes(b'0\n%s\n' % b'Not Found')
return True
proto = httpv1protocolhandler(
req, repo.ui, lambda perm: checkperm(rctx, req, perm)
)
# The permissions checker should be the only thing that can raise an
# ErrorResponse. It is kind of a layer violation to catch an hgweb
# exception here. So consider refactoring into a exception type that
# is associated with the wire protocol.
try:
_callhttp(repo, req, res, proto, cmd)
except hgwebcommon.ErrorResponse as e:
for k, v in e.headers:
res.headers[k] = v
res.status = hgwebcommon.statusmessage(
e.code, stringutil.forcebytestr(e)
)
# TODO This response body assumes the failed command was
# "unbundle." That assumption is not always valid.
res.setbodybytes(b'0\n%s\n' % stringutil.forcebytestr(e))
return True
def _httpresponsetype(ui, proto, prefer_uncompressed):
"""Determine the appropriate response type and compression settings.
Returns a tuple of (mediatype, compengine, engineopts).
"""
# Determine the response media type and compression engine based
# on the request parameters.
if b'0.2' in proto.getprotocaps():
# All clients are expected to support uncompressed data.
if prefer_uncompressed:
return HGTYPE2, compression._noopengine(), {}
# Now find an agreed upon compression format.
compformats = wireprotov1server.clientcompressionsupport(proto)
for engine in wireprototypes.supportedcompengines(
ui, compression.SERVERROLE
):
if engine.wireprotosupport().name in compformats:
opts = {}
level = ui.configint(b'server', b'%slevel' % engine.name())
if level is not None:
opts[b'level'] = level
return HGTYPE2, engine, opts
# No mutually supported compression format. Fall back to the
# legacy protocol.
# Don't allow untrusted settings because disabling compression or
# setting a very high compression level could lead to flooding
# the server's network or CPU.
opts = {b'level': ui.configint(b'server', b'zliblevel')}
return HGTYPE, util.compengines[b'zlib'], opts
def _callhttp(repo, req, res, proto, cmd):
# Avoid cycle involving hg module.
from .hgweb import common as hgwebcommon
def genversion2(gen, engine, engineopts):
# application/mercurial-0.2 always sends a payload header
# identifying the compression engine.
name = engine.wireprotosupport().name
assert 0 < len(name) < 256
yield struct.pack(b'B', len(name))
yield name
for chunk in gen:
yield chunk
def setresponse(code, contenttype, bodybytes=None, bodygen=None):
if code == HTTP_OK:
res.status = b'200 Script output follows'
else:
res.status = hgwebcommon.statusmessage(code)
res.headers[b'Content-Type'] = contenttype
if bodybytes is not None:
res.setbodybytes(bodybytes)
if bodygen is not None:
res.setbodygen(bodygen)
if not wireprotov1server.commands.commandavailable(cmd, proto):
setresponse(
HTTP_OK,
HGERRTYPE,
_(
b'requested wire protocol command is not available over '
b'HTTP'
),
)
return
proto.checkperm(wireprotov1server.commands[cmd].permission)
accesshidden = hgwebcommon.hashiddenaccess(repo, req)
rsp = wireprotov1server.dispatch(repo, proto, cmd, accesshidden)
if isinstance(rsp, bytes):
setresponse(HTTP_OK, HGTYPE, bodybytes=rsp)
elif isinstance(rsp, wireprototypes.bytesresponse):
setresponse(HTTP_OK, HGTYPE, bodybytes=rsp.data)
elif isinstance(rsp, wireprototypes.streamreslegacy):
setresponse(HTTP_OK, HGTYPE, bodygen=rsp.gen)
elif isinstance(rsp, wireprototypes.streamres):
gen = rsp.gen
# This code for compression should not be streamres specific. It
# is here because we only compress streamres at the moment.
mediatype, engine, engineopts = _httpresponsetype(
repo.ui, proto, rsp.prefer_uncompressed
)
gen = engine.compressstream(gen, engineopts)
if mediatype == HGTYPE2:
gen = genversion2(gen, engine, engineopts)
setresponse(HTTP_OK, mediatype, bodygen=gen)
elif isinstance(rsp, wireprototypes.pushres):
rsp = b'%d\n%s' % (rsp.res, rsp.output)
setresponse(HTTP_OK, HGTYPE, bodybytes=rsp)
elif isinstance(rsp, wireprototypes.pusherr):
rsp = b'0\n%s\n' % rsp.res
res.drain = True
setresponse(HTTP_OK, HGTYPE, bodybytes=rsp)
elif isinstance(rsp, wireprototypes.ooberror):
setresponse(HTTP_OK, HGERRTYPE, bodybytes=rsp.message)
else:
raise error.ProgrammingError(b'hgweb.protocol internal failure', rsp)
def _sshv1respondbytes(fout, value):
"""Send a bytes response for protocol version 1."""
fout.write(b'%d\n' % len(value))
fout.write(value)
fout.flush()
def _sshv1respondstream(fout, source):
write = fout.write
for chunk in source.gen:
write(chunk)
fout.flush()
def _sshv1respondooberror(fout, ferr, rsp):
ferr.write(b'%s\n-\n' % rsp)
ferr.flush()
fout.write(b'\n')
fout.flush()
@interfaceutil.implementer(wireprototypes.baseprotocolhandler)
class sshv1protocolhandler:
"""Handler for requests services via version 1 of SSH protocol."""
def __init__(self, ui, fin, fout):
self._ui = ui
self._fin = fin
self._fout = fout
self._protocaps = set()
@property
def name(self):
return wireprototypes.SSHV1
def getargs(self, args):
data = {}
keys = args.split()
for n in range(len(keys)):
argline = self._fin.readline()[:-1]
arg, l = argline.split()
if arg not in keys:
raise error.Abort(_(b"unexpected parameter %r") % arg)
if arg == b'*':
star = {}
for k in range(int(l)):
argline = self._fin.readline()[:-1]
arg, l = argline.split()
val = self._fin.read(int(l))
star[arg] = val
data[b'*'] = star
else:
val = self._fin.read(int(l))
data[arg] = val
return [data[k] for k in keys]
def getprotocaps(self):
return self._protocaps
def getpayload(self):
# We initially send an empty response. This tells the client it is
# OK to start sending data. If a client sees any other response, it
# interprets it as an error.
_sshv1respondbytes(self._fout, b'')
# The file is in the form:
#
# <chunk size>\n<chunk>
# ...
# 0\n
count = int(self._fin.readline())
while count:
yield self._fin.read(count)
count = int(self._fin.readline())
@contextlib.contextmanager
def mayberedirectstdio(self):
yield None
def client(self):
client = encoding.environ.get(b'SSH_CLIENT', b'').split(b' ', 1)[0]
return b'remote:ssh:' + client
def addcapabilities(self, repo, caps):
if self.name == wireprototypes.SSHV1:
caps.append(b'protocaps')
caps.append(b'batch')
return caps
def checkperm(self, perm):
pass
def _runsshserver(ui, repo, fin, fout, ev, accesshidden=False):
# This function operates like a state machine of sorts. The following
# states are defined:
#
# protov1-serving
# Server is in protocol version 1 serving mode. Commands arrive on
# new lines. These commands are processed in this state, one command
# after the other.
#
# shutdown
# The server is shutting down, possibly in reaction to a client event.
#
# And here are their transitions:
#
# protov1-serving -> shutdown
# When server receives an empty request or encounters another
# error.
state = b'protov1-serving'
proto = sshv1protocolhandler(ui, fin, fout)
while not ev.is_set():
if state == b'protov1-serving':
# Commands are issued on new lines.
request = fin.readline()[:-1]
# Empty lines signal to terminate the connection.
if not request:
state = b'shutdown'
continue
available = wireprotov1server.commands.commandavailable(
request, proto
)
# This command isn't available. Send an empty response and go
# back to waiting for a new command.
if not available:
_sshv1respondbytes(fout, b'')
continue
rsp = wireprotov1server.dispatch(
repo, proto, request, accesshidden=accesshidden
)
repo.ui.fout.flush()
repo.ui.ferr.flush()
if isinstance(rsp, bytes):
_sshv1respondbytes(fout, rsp)
elif isinstance(rsp, wireprototypes.bytesresponse):
_sshv1respondbytes(fout, rsp.data)
elif isinstance(rsp, wireprototypes.streamres):
_sshv1respondstream(fout, rsp)
elif isinstance(rsp, wireprototypes.streamreslegacy):
_sshv1respondstream(fout, rsp)
elif isinstance(rsp, wireprototypes.pushres):
_sshv1respondbytes(fout, b'')
_sshv1respondbytes(fout, b'%d' % rsp.res)
elif isinstance(rsp, wireprototypes.pusherr):
_sshv1respondbytes(fout, rsp.res)
elif isinstance(rsp, wireprototypes.ooberror):
_sshv1respondooberror(fout, ui.ferr, rsp.message)
else:
raise error.ProgrammingError(
b'unhandled response type from '
b'wire protocol command: %s' % rsp
)
elif state == b'shutdown':
break
else:
raise error.ProgrammingError(
b'unhandled ssh server state: %s' % state
)
class sshserver:
def __init__(self, ui, repo, logfh=None, accesshidden=False):
self._ui = ui
self._repo = repo
self._fin, self._fout = ui.protectfinout()
self._accesshidden = accesshidden
# Log write I/O to stdout and stderr if configured.
if logfh:
self._fout = util.makeloggingfileobject(
logfh, self._fout, b'o', logdata=True
)
ui.ferr = util.makeloggingfileobject(
logfh, ui.ferr, b'e', logdata=True
)
def serve_forever(self):
self.serveuntil(threading.Event())
self._ui.restorefinout(self._fin, self._fout)
def serveuntil(self, ev):
"""Serve until a threading.Event is set."""
_runsshserver(
self._ui, self._repo, self._fin, self._fout, ev, self._accesshidden
)