view hgext/split.py @ 49416:1bad05cfc818 stable

rust: bump to memmap2 0.5.3, micro-timer 0.4.0, and crossbeam-channel 0.5.0

The merge in 12adf8c695ed had conflicts in rust/Cargo.lock and
rust/hg-core/Cargo.toml . Let's ignore rust/Cargo.lock - it is regenerated.

For rust/hg-core/Cargo.toml, stable had dd6b67d5c256 "rust: fix unsound
`OwningDirstateMap`" which introduced ouroboros (and dropped
stable_deref_trait).

Default had ec8d9b5a5e7c "rust-hg-core: upgrade dependencies" which had a lot
of churn bumping minimum versions - also patch versions. It is indeed a good
idea to bump to *allow* use of latest package. That means that major versions
should be bumped for packages after 1.0, and for packages below 1.0 minor
versions should be bumped too. But it doesn't work to try enforce a policy of
using latest patch by bumping versions at arbitrary times.

For good or bad, the merge doesn't seem to have resolved the conflicts
correctly, and many of the minor "upgrade dependencies" were lost again.

Unfortunately, it also lost the bump of memmap2 to 0.5.3, which is needed for
Fedora packaging where 0.4 isn't available. Same with micro-timer bump to 0.4
(which already is used in rhg). crossbeam-channel bump was also lost.

This change fixes that regression by redoing these "important" lines of the
merge "correctly".

I propose this for stable, even though dependency changes on stable branches
are annoying.

# split.py - split a changeset into smaller ones
#
# Copyright 2015 Laurent Charignon <[e-mail]>
# Copyright 2017 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""command to split a changeset into smaller ones (EXPERIMENTAL)"""


from mercurial.i18n import _

from mercurial.node import (
    nullrev,
    short,
)

from mercurial import (
    bookmarks,
    cmdutil,
    commands,
    error,
    hg,
    logcmdutil,
    pycompat,
    registrar,
    revsetlang,
    rewriteutil,
    scmutil,
    util,
)

# allow people to use split without explicitly enabling rebase extension
from . import rebase

cmdtable = {}
command = registrar.command(cmdtable)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = b'ships-with-hg-core'


@command(
    b'split',
    [
        (b'r', b'rev', b'', _(b"revision to split"), _(b'REV')),
        (b'', b'rebase', True, _(b'rebase descendants after split')),
    ]
    + cmdutil.commitopts2,
    _(b'hg split [--no-rebase] [[-r] REV]'),
    helpcategory=command.CATEGORY_CHANGE_MANAGEMENT,
    helpbasic=True,
)
def split(ui, repo, *revs, **opts):
    """split a changeset into smaller ones

    Repeatedly prompt changes and commit message for new changesets until there
    is nothing left in the original changeset.

    If --rev was not given, split the working directory parent.

    By default, rebase connected non-obsoleted descendants onto the new
    changeset. Use --no-rebase to avoid the rebase.
    """
    opts = pycompat.byteskwargs(opts)
    revlist = []
    if opts.get(b'rev'):
        revlist.append(opts.get(b'rev'))
    revlist.extend(revs)
    with repo.wlock(), repo.lock():
        tr = repo.transaction(b'split')
        # If the rebase somehow runs into conflicts, make sure
        # we close the transaction so the user can continue it.
        with util.acceptintervention(tr):
            revs = logcmdutil.revrange(repo, revlist or [b'.'])
            if len(revs) > 1:
                raise error.InputError(_(b'cannot split multiple revisions'))

            rev = revs.first()
            # Handle nullrev specially here (instead of leaving for precheck()
            # below) so we get a nicer message and error code.
            if rev is None or rev == nullrev:
                ui.status(_(b'nothing to split\n'))
                return 1
            ctx = repo[rev]
            if ctx.node() is None:
                raise error.InputError(_(b'cannot split working directory'))

            if opts.get(b'rebase'):
                # Skip obsoleted descendants and their descendants so the rebase
                # won't cause conflicts for sure.
                descendants = list(repo.revs(b'(%d::) - (%d)', rev, rev))
                torebase = list(
                    repo.revs(
                        b'%ld - (%ld & obsolete())::', descendants, descendants
                    )
                )
            else:
                torebase = []
            rewriteutil.precheck(repo, [rev] + torebase, b'split')

            if len(ctx.parents()) > 1:
                raise error.InputError(_(b'cannot split a merge changeset'))

            cmdutil.bailifchanged(repo)

            # Deactivate bookmark temporarily so it won't get moved
            # unintentionally
            bname = repo._activebookmark
            if bname and repo._bookmarks[bname] != ctx.node():
                bookmarks.deactivate(repo)

            wnode = repo[b'.'].node()
            top = None
            try:
                top = dosplit(ui, repo, tr, ctx, opts)
            finally:
                # top is None: split failed, need update --clean recovery.
                # wnode == ctx.node(): wnode split, no need to update.
                if top is None or wnode != ctx.node():
                    hg.clean(repo, wnode, show_stats=False)
                if bname:
                    bookmarks.activate(repo, bname)
            if torebase and top:
                dorebase(ui, repo, torebase, top)


def dosplit(ui, repo, tr, ctx, opts):
    committed = []  # [ctx]

    # Set working parent to ctx.p1(), and keep working copy as ctx's content
    if ctx.node() != repo.dirstate.p1():
        hg.clean(repo, ctx.node(), show_stats=False)
    with repo.dirstate.parentchange():
        scmutil.movedirstate(repo, ctx.p1())

    # Any modified, added, removed, deleted result means split is incomplete
    def incomplete(repo):
        st = repo.status()
        return any((st.modified, st.added, st.removed, st.deleted))

    # Main split loop
    while incomplete(repo):
        if committed:
            header = _(
                b'HG: Splitting %s. So far it has been split into:\n'
            ) % short(ctx.node())
            # We don't want color codes in the commit message template, so
            # disable the label() template function while we render it.
            with ui.configoverride(
                {(b'templatealias', b'label(l,x)'): b"x"}, b'split'
            ):
                for c in committed:
                    summary = cmdutil.format_changeset_summary(ui, c, b'split')
                    header += _(b'HG: - %s\n') % summary
            header += _(
                b'HG: Write commit message for the next split changeset.\n'
            )
        else:
            header = _(
                b'HG: Splitting %s. Write commit message for the '
                b'first split changeset.\n'
            ) % short(ctx.node())
        opts.update(
            {
                b'edit': True,
                b'interactive': True,
                b'message': header + ctx.description(),
            }
        )
        origctx = repo[b'.']
        commands.commit(ui, repo, **pycompat.strkwargs(opts))
        newctx = repo[b'.']
        # Ensure user didn't do a "no-op" split (such as deselecting
        # everything).
        if origctx.node() != newctx.node():
            committed.append(newctx)

    if not committed:
        raise error.InputError(_(b'cannot split an empty revision'))

    if len(committed) != 1 or committed[0].node() != ctx.node():
        # Ensure we don't strip a node if we produce the same commit as already
        # exists
        scmutil.cleanupnodes(
            repo,
            {ctx.node(): [c.node() for c in committed]},
            operation=b'split',
            fixphase=True,
        )

    return committed[-1]


def dorebase(ui, repo, src, destctx):
    rebase.rebase(
        ui,
        repo,
        rev=[revsetlang.formatspec(b'%ld', src)],
        dest=revsetlang.formatspec(b'%d', destctx.rev()),
    )