view tests/test-repo-compengines.t @ 44985:1ca0047fd7e1

absorb: preserve changesets which were already empty

Most commands in Mercurial (commit, rebase, absorb itself) don’t create empty
changesets or drop them if they become empty. If there’s a changeset that’s
empty, it must be a deliberate choice of the user. At least it shouldn’t be
absorb’s responsibility to prune them. The fact that changesets that became
empty during absorb are pruned, is unaffected by this.

This case was found while writing patches which make it possible to configure
absorb and rebase to not drop empty changesets. Even without having such config
set, I think it’s valuable to preserve changesets which were already empty.

A new repository uses zlib storage, which doesn't need a requirement

  $ hg init default
  $ cd default
  $ cat .hg/requires
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

  $ touch foo
  $ hg -q commit -A -m 'initial commit with a lot of repeated repeated repeated text to trigger compression'
  $ hg debugrevlog -c | grep 0x78
      0x78 (x)  :   1 (100.00%)
      0x78 (x)  : 110 (100.00%)

  $ cd ..

Unknown compression engine to format.compression aborts

  $ hg --config format.revlog-compression=unknown init unknown
  abort: compression engines "unknown" defined by format.revlog-compression not available
  (run "hg debuginstall" to list available compression engines)
  [255]

unknown compression engine in a list with known one works fine

  $ hg --config format.revlog-compression=zlib,unknown init zlib-before-unknow
  $ hg --config format.revlog-compression=unknown,zlib init unknown-before-zlib

A requirement specifying an unknown compression engine results in bail

  $ hg init unknownrequirement
  $ cd unknownrequirement
  $ echo exp-compression-unknown >> .hg/requires
  $ hg log
  abort: repository requires features unknown to this Mercurial: exp-compression-unknown!
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]

  $ cd ..

#if zstd

  $ hg --config format.revlog-compression=zstd init zstd
  $ cd zstd
  $ cat .hg/requires
  dotencode
  fncache
  generaldelta
  revlog-compression-zstd
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

  $ touch foo
  $ hg -q commit -A -m 'initial commit with a lot of repeated repeated repeated text'

  $ hg debugrevlog -c | grep 0x28
      0x28      :  1 (100.00%)
      0x28      : 98 (100.00%)

  $ cd ..

Specifying a new format.compression on an existing repo won't introduce data
with that engine or a requirement

  $ cd default
  $ touch bar
  $ hg --config format.revlog-compression=zstd -q commit -A -m 'add bar with a lot of repeated repeated repeated text'

  $ cat .hg/requires
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

  $ hg debugrevlog -c | grep 0x78
      0x78 (x)  :   2 (100.00%)
      0x78 (x)  : 199 (100.00%)

#endif

checking zlib options
=====================

  $ hg init zlib-level-default
  $ hg init zlib-level-1
  $ cat << EOF >> zlib-level-1/.hg/hgrc
  > [storage]
  > revlog.zlib.level=1
  > EOF
  $ hg init zlib-level-9
  $ cat << EOF >> zlib-level-9/.hg/hgrc
  > [storage]
  > revlog.zlib.level=9
  > EOF


  $ commitone() {
  >    repo=$1
  >    cp $RUNTESTDIR/bundles/issue4438-r1.hg $repo/a
  >    hg -R $repo add $repo/a
  >    hg -R $repo commit -m some-commit
  > }

  $ for repo in zlib-level-default zlib-level-1 zlib-level-9; do
  >     commitone $repo
  > done

  $ $RUNTESTDIR/f -s */.hg/store/data/*
  default/.hg/store/data/foo.i: size=64 (pure !)
  zlib-level-1/.hg/store/data/a.i: size=4146
  zlib-level-9/.hg/store/data/a.i: size=4138
  zlib-level-default/.hg/store/data/a.i: size=4138

Test error cases

  $ hg init zlib-level-invalid
  $ cat << EOF >> zlib-level-invalid/.hg/hgrc
  > [storage]
  > revlog.zlib.level=foobar
  > EOF
  $ commitone zlib-level-invalid
  abort: storage.revlog.zlib.level is not a valid integer ('foobar')
  abort: storage.revlog.zlib.level is not a valid integer ('foobar')
  [255]

  $ hg init zlib-level-out-of-range
  $ cat << EOF >> zlib-level-out-of-range/.hg/hgrc
  > [storage]
  > revlog.zlib.level=42
  > EOF

  $ commitone zlib-level-out-of-range
  abort: invalid value for `storage.revlog.zlib.level` config: 42
  abort: invalid value for `storage.revlog.zlib.level` config: 42
  [255]

#if zstd

checking zstd options
=====================

  $ hg init zstd-level-default --config format.revlog-compression=zstd
  $ hg init zstd-level-1 --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-1/.hg/hgrc
  > [storage]
  > revlog.zstd.level=1
  > EOF
  $ hg init zstd-level-22 --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-22/.hg/hgrc
  > [storage]
  > revlog.zstd.level=22
  > EOF


  $ commitone() {
  >    repo=$1
  >    cp $RUNTESTDIR/bundles/issue4438-r1.hg $repo/a
  >    hg -R $repo add $repo/a
  >    hg -R $repo commit -m some-commit
  > }

  $ for repo in zstd-level-default zstd-level-1 zstd-level-22; do
  >     commitone $repo
  > done

  $ $RUNTESTDIR/f -s zstd-*/.hg/store/data/*
  zstd-level-1/.hg/store/data/a.i: size=4114
  zstd-level-22/.hg/store/data/a.i: size=4091
  zstd-level-default/\.hg/store/data/a\.i: size=(4094|4102) (re)

Test error cases

  $ hg init zstd-level-invalid --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-invalid/.hg/hgrc
  > [storage]
  > revlog.zstd.level=foobar
  > EOF
  $ commitone zstd-level-invalid
  abort: storage.revlog.zstd.level is not a valid integer ('foobar')
  abort: storage.revlog.zstd.level is not a valid integer ('foobar')
  [255]

  $ hg init zstd-level-out-of-range --config format.revlog-compression=zstd
  $ cat << EOF >> zstd-level-out-of-range/.hg/hgrc
  > [storage]
  > revlog.zstd.level=42
  > EOF

  $ commitone zstd-level-out-of-range
  abort: invalid value for `storage.revlog.zstd.level` config: 42
  abort: invalid value for `storage.revlog.zstd.level` config: 42
  [255]

#endif