view hgext/record.py @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

# record.py
#
# Copyright 2007 Bryan O'Sullivan <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''commands to interactively select changes for commit/qrefresh (DEPRECATED)

The feature provided by this extension has been moved into core Mercurial as
:hg:`commit --interactive`.'''

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    commands,
    error,
    extensions,
    registrar,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'


@command("record",
         # same options as commit + white space diff options
        [c for c in commands.table['commit|ci'][1][:]
            if c[1] != "interactive"] + cmdutil.diffwsopts,
          _('hg record [OPTION]... [FILE]...'),
        helpcategory=command.CATEGORY_COMMITTING)
def record(ui, repo, *pats, **opts):
    '''interactively select changes to commit

    If a list of files is omitted, all changes reported by :hg:`status`
    will be candidates for recording.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    If using the text interface (see :hg:`help config`),
    you will be prompted for whether to record changes to each
    modified file, and for files with multiple changes, for each
    change to use. For each query, the following responses are
    possible::

      y - record this change
      n - skip this change
      e - edit this change manually

      s - skip remaining changes to this file
      f - record remaining changes to this file

      d - done, skip remaining changes and files
      a - record all changes to all remaining files
      q - quit, recording no changes

      ? - display help

    This command is not available when committing a merge.'''

    if not ui.interactive():
        raise error.Abort(_('running non-interactively, use %s instead') %
                         'commit')

    opts[r"interactive"] = True
    overrides = {('experimental', 'crecord'): False}
    with ui.configoverride(overrides, 'record'):
        return commands.commit(ui, repo, *pats, **opts)

def qrefresh(origfn, ui, repo, *pats, **opts):
    if not opts[r'interactive']:
        return origfn(ui, repo, *pats, **opts)

    mq = extensions.find('mq')

    def committomq(ui, repo, *pats, **opts):
        # At this point the working copy contains only changes that
        # were accepted. All other changes were reverted.
        # We can't pass *pats here since qrefresh will undo all other
        # changed files in the patch that aren't in pats.
        mq.refresh(ui, repo, **opts)

    # backup all changed files
    cmdutil.dorecord(ui, repo, committomq, None, True,
                    cmdutil.recordfilter, *pats, **opts)

# This command registration is replaced during uisetup().
@command('qrecord',
    [],
    _('hg qrecord [OPTION]... PATCH [FILE]...'),
    helpcategory=command.CATEGORY_COMMITTING,
    inferrepo=True)
def qrecord(ui, repo, patch, *pats, **opts):
    '''interactively record a new patch

    See :hg:`help qnew` & :hg:`help record` for more information and
    usage.
    '''
    return _qrecord('qnew', ui, repo, patch, *pats, **opts)

def _qrecord(cmdsuggest, ui, repo, patch, *pats, **opts):
    try:
        mq = extensions.find('mq')
    except KeyError:
        raise error.Abort(_("'mq' extension not loaded"))

    repo.mq.checkpatchname(patch)

    def committomq(ui, repo, *pats, **opts):
        opts[r'checkname'] = False
        mq.new(ui, repo, patch, *pats, **opts)

    overrides = {('experimental', 'crecord'): False}
    with ui.configoverride(overrides, 'record'):
        cmdutil.checkunfinished(repo)
        cmdutil.dorecord(ui, repo, committomq, cmdsuggest, False,
                         cmdutil.recordfilter, *pats, **opts)

def qnew(origfn, ui, repo, patch, *args, **opts):
    if opts[r'interactive']:
        return _qrecord(None, ui, repo, patch, *args, **opts)
    return origfn(ui, repo, patch, *args, **opts)


def uisetup(ui):
    try:
        mq = extensions.find('mq')
    except KeyError:
        return

    cmdtable["qrecord"] = (
        qrecord,
        # same options as qnew, but copy them so we don't get
        # -i/--interactive for qrecord and add white space diff options
        mq.cmdtable['qnew'][1][:] + cmdutil.diffwsopts,
        _('hg qrecord [OPTION]... PATCH [FILE]...'))

    _wrapcmd('qnew', mq.cmdtable, qnew, _("interactively record a new patch"))
    _wrapcmd('qrefresh', mq.cmdtable, qrefresh,
             _("interactively select changes to refresh"))

def _wrapcmd(cmd, table, wrapfn, msg):
    entry = extensions.wrapcommand(table, cmd, wrapfn)
    entry[1].append(('i', 'interactive', None, msg))