view tests/test-bookflow.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

initialize
  $ make_changes() {
  >     d=`pwd`
  >     [ ! -z $1 ] && cd $1
  >     echo "test `basename \`pwd\``" >> test
  >     hg commit -Am"${2:-test}"
  >     r=$?
  >     cd $d
  >     return $r
  > }
  $ ls -1a
  .
  ..
  $ hg init a
  $ cd a
  $ echo 'test' > test; hg commit -Am'test'
  adding test

clone to b

  $ mkdir ../b
  $ cd ../b
  $ hg clone ../a .
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo "[extensions]" >> .hg/hgrc
  $ echo "bookflow=" >> .hg/hgrc
  $ hg branch X
  abort: creating named branches is disabled and you should use bookmarks
  (see 'hg help bookflow')
  [255]
  $ hg bookmark X
  $ hg bookmarks
  * X                         0:* (glob)
  $ hg bookmark X
  abort: bookmark X already exists, to move use the --rev option
  [255]
  $ make_changes
  $ hg push ../a -q

  $ hg bookmarks
   \* X                         1:* (glob)

change a
  $ cd ../a
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 'test' >> test; hg commit -Am'test'


pull in b
  $ cd ../b
  $ hg pull -u
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets * (glob)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark X)
  $ hg status
  $ hg bookmarks
     X                         1:* (glob)

check protection of @ bookmark
  $ hg bookmark @
  $ hg bookmarks
   \* @                         2:* (glob)
     X                         1:* (glob)
  $ make_changes
  abort: cannot commit, bookmark @ is protected
  [255]

  $ hg status
  M test
  $ hg bookmarks
   \* @                         2:* (glob)
     X                         1:* (glob)

  $ hg --config bookflow.protect= commit  -Am"Updated test"

  $ hg bookmarks
   \* @                         3:* (glob)
     X                         1:* (glob)

check requirement for an active bookmark
  $ hg bookmark -i
  $ hg bookmarks
     @                         3:* (glob)
     X                         1:* (glob)
  $ make_changes
  abort: cannot commit without an active bookmark
  [255]
  $ hg revert test
  $ rm test.orig
  $ hg status


make the bookmark move by updating it on a, and then pulling
# add a commit to a
  $ cd ../a
  $ hg bookmark X
  $ hg bookmarks
   \* X                         2:* (glob)
  $ make_changes
  $ hg bookmarks
   * X                         3:81af7977fdb9

# go back to b, and check out X
  $ cd ../b
  $ hg up X
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark X)
  $ hg bookmarks
     @                         3:* (glob)
   \* X                         1:* (glob)

# pull, this should move the bookmark forward, because it was changed remotely
  $ hg pull -u | grep "updating to active bookmark X"
  updating to active bookmark X

  $ hg bookmarks
     @                         3:* (glob)
   * X                         4:81af7977fdb9

the bookmark should not move if it diverged from remote
  $ hg -R ../a status
  $ hg -R ../b status
  $ make_changes ../a
  $ make_changes ../b
  $ hg -R ../a status
  $ hg -R ../b status
  $ hg -R ../a bookmarks
   * X                         4:238292f60a57
  $ hg -R ../b bookmarks
     @                         3:* (glob)
   * X                         5:096f7e86892d
  $ cd ../b
  $ # make sure we cannot push after bookmarks diverged
  $ hg push -B X | grep abort
  abort: push creates new remote head * with bookmark 'X'! (glob)
  (pull and merge or see 'hg help push' for details about pushing new heads)
  [1]
  $ hg pull -u | grep divergent
  divergent bookmark X stored as X@default
  1 other divergent bookmarks for "X"
  $ hg bookmarks
     @                         3:* (glob)
   * X                         5:096f7e86892d
     X@default                 6:238292f60a57
  $ hg id -in
  096f7e86892d 5
  $ make_changes
  $ hg status
  $ hg bookmarks
     @                         3:* (glob)
   * X                         7:227f941aeb07
     X@default                 6:238292f60a57

now merge with the remote bookmark
  $ hg merge X@default --tool :local -q
  $ hg status
  M test
  $ hg commit -m"Merged with X@default"
  $ hg bookmarks
     @                         3:* (glob)
   * X                         8:26fed9bb3219
  $ hg push -B X | grep bookmark
  pushing to $TESTTMP/a (?)
  updating bookmark X
  $ cd ../a
  $ hg up -q
  $ hg bookmarks
   * X                         7:26fed9bb3219

test hg pull when there is more than one descendant
  $ cd ../a
  $ hg bookmark Z
  $ hg bookmark Y
  $ make_changes . YY
  $ hg up Z -q
  $ make_changes . ZZ
  created new head
  $ hg bookmarks
     X                         7:26fed9bb3219
     Y                         8:131e663dbd2a
   * Z                         9:b74a4149df25
  $ hg log -r 'p1(Y)' -r 'p1(Z)' -T '{rev}\n' # prove that Y and Z share the same parent
  7
  $ hg log -r 'Y%Z' -T '{rev}\n'  # revs in Y but not in Z
  8
  $ hg log -r 'Z%Y' -T '{rev}\n'  # revs in Z but not in Y
  9
  $ cd ../b
  $ hg pull -uq
  $ hg id
  b74a4149df25 tip Z
  $ hg bookmarks | grep \*  # no active bookmark
  [1]


test shelving
  $ cd ../a
  $ echo anotherfile > anotherfile # this change should not conflict
  $ hg add anotherfile
  $ hg commit -m"Change in a"
  $ cd ../b
  $ hg up Z | grep Z
  (activating bookmark Z)
  $ hg book | grep \* # make sure active bookmark
   \* Z                         10:* (glob)
  $ echo "test b" >> test
  $ hg diff --stat
   test |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg shelve
  shelved as Z
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg pull -uq
  $ hg unshelve
  unshelving change 'Z'
  rebasing shelved changes
  $ hg diff --stat
   test |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)


make the bookmark move by updating it on a, and then pulling with a local change
# add a commit to a
  $ cd ../a
  $ hg up -C X |fgrep  "activating bookmark X"
  (activating bookmark X)
# go back to b, and check out X
  $ cd ../b
  $ hg up -C X |fgrep  "activating bookmark X"
  (activating bookmark X)
# update and push from a
  $ make_changes ../a
  created new head
  $ echo "more" >> test
  $ hg pull -u 2>&1 | fgrep -v TESTTMP| fgrep -v "searching for changes" | fgrep -v adding
  pulling from $TESTTMP/a
  added 1 changesets with 0 changes to 0 files (+1 heads)
  updating bookmark X
  new changesets * (glob)
  updating to active bookmark X
  merging test
  warning: conflicts while merging test! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  $ hg update -Cq
  $ rm test.orig

make sure that commits aren't possible if working directory is not pointing to active bookmark
  $ hg -R ../a status
  $ hg -R ../b status
  $ hg -R ../a id -i
  36a6e592ec06
  $ hg -R ../a book | grep X
   \* X                         \d+:36a6e592ec06 (re)
  $ hg -R ../b id -i
  36a6e592ec06
  $ hg -R ../b book | grep X
   \* X                         \d+:36a6e592ec06 (re)
  $ make_changes ../a
  $ hg -R ../a book | grep X
   \* X                         \d+:f73a71c992b8 (re)
  $ cd ../b
  $ hg pull  2>&1 | grep -v add | grep -v pulling | grep -v searching | grep -v changeset
  updating bookmark X
  (run 'hg update' to get a working copy)
  working directory out of sync with active bookmark, run 'hg up X'
  $ hg id -i # we're still on the old commit
  36a6e592ec06
  $ hg book | grep X # while the bookmark moved
   \* X                         \d+:f73a71c992b8 (re)
  $ make_changes
  abort: cannot commit, working directory out of sync with active bookmark
  (run 'hg up X')
  [255]
  $ hg up -Cq -r .  # cleanup local changes
  $ hg status
  $ hg id -i # we're still on the old commit
  36a6e592ec06
  $ hg up X -q
  $ hg id -i # now we're on X
  f73a71c992b8
  $ hg book | grep X
   \* X                         \d+:f73a71c992b8 (re)