view tests/test-contrib-check-code.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

  $ cat > correct.py <<NO_CHECK_EOF
  > def toto(arg1, arg2):
  >     del arg2
  >     return (5 + 6, 9)
  > NO_CHECK_EOF
  $ cat > wrong.py <<NO_CHECK_EOF
  > def toto( arg1, arg2):
  >     del(arg2)
  >     return ( 5+6, 9)
  > def badwrap():
  >     return 1 + \\
  >        2
  > NO_CHECK_EOF
  $ cat > quote.py <<NO_CHECK_EOF
  > # let's use quote in comments
  > (''' ( 4x5 )
  > but """\\''' and finally''',
  > """let's fool checkpatch""", '1+2',
  > '"""', 42+1, """and
  > ( 4-1 ) """, "( 1+1 )\" and ")
  > a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
  > NO_CHECK_EOF
  $ cat > classstyle.py <<NO_CHECK_EOF
  > class newstyle_class(object):
  >     pass
  > 
  > class oldstyle_class:
  >     pass
  > 
  > class empty():
  >     pass
  > 
  > no_class = 1:
  >     pass
  > NO_CHECK_EOF
  $ check_code="$TESTDIR"/../contrib/check-code.py
  $ "$check_code" ./wrong.py ./correct.py ./quote.py ./classstyle.py
  ./wrong.py:1:
   > def toto( arg1, arg2):
   gratuitous whitespace in () or []
  ./wrong.py:2:
   >     del(arg2)
   Python keyword is not a function
  ./wrong.py:3:
   >     return ( 5+6, 9)
   gratuitous whitespace in () or []
   missing whitespace in expression
  ./wrong.py:5:
   >     return 1 + \
   Use () to wrap long lines in Python, not \
  ./quote.py:5:
   > '"""', 42+1, """and
   missing whitespace in expression
  ./classstyle.py:4:
   > class oldstyle_class:
   old-style class, use class foo(object)
  ./classstyle.py:7:
   > class empty():
   class foo() creates old style object, use class foo(object)
  [1]
  $ cat > python3-compat.py << NO_CHECK_EOF
  > foo <> bar
  > reduce(lambda a, b: a + b, [1, 2, 3, 4])
  > dict(key=value)
  > NO_CHECK_EOF
  $ "$check_code" python3-compat.py
  python3-compat.py:1:
   > foo <> bar
   <> operator is not available in Python 3+, use !=
  python3-compat.py:2:
   > reduce(lambda a, b: a + b, [1, 2, 3, 4])
   reduce is not available in Python 3+
  python3-compat.py:3:
   > dict(key=value)
   dict() is different in Py2 and 3 and is slower than {}
  [1]

  $ cat > foo.c <<NO_CHECK_EOF
  > void narf() {
  > 	strcpy(foo, bar);
  > 	// strcpy_s is okay, but this comment is not
  > 	strcpy_s(foo, bar);
  > }
  > NO_CHECK_EOF
  $ "$check_code" ./foo.c
  ./foo.c:2:
   > 	strcpy(foo, bar);
   don't use strcpy, use strlcpy or memcpy
  ./foo.c:3:
   > 	// strcpy_s is okay, but this comment is not
   don't use //-style comments
  [1]

  $ cat > is-op.py <<NO_CHECK_EOF
  > # is-operator comparing number or string literal
  > x = None
  > y = x is 'foo'
  > y = x is "foo"
  > y = x is 5346
  > y = x is -6
  > y = x is not 'foo'
  > y = x is not "foo"
  > y = x is not 5346
  > y = x is not -6
  > NO_CHECK_EOF

  $ "$check_code" ./is-op.py
  ./is-op.py:3:
   > y = x is 'foo'
   object comparison with literal
  ./is-op.py:4:
   > y = x is "foo"
   object comparison with literal
  ./is-op.py:5:
   > y = x is 5346
   object comparison with literal
  ./is-op.py:6:
   > y = x is -6
   object comparison with literal
  ./is-op.py:7:
   > y = x is not 'foo'
   object comparison with literal
  ./is-op.py:8:
   > y = x is not "foo"
   object comparison with literal
  ./is-op.py:9:
   > y = x is not 5346
   object comparison with literal
  ./is-op.py:10:
   > y = x is not -6
   object comparison with literal
  [1]

  $ cat > for-nolineno.py <<NO_CHECK_EOF
  > except:
  > NO_CHECK_EOF
  $ "$check_code" for-nolineno.py --nolineno
  for-nolineno.py:0:
   > except:
   naked except clause
  [1]

  $ cat > warning.t <<NO_CHECK_EOF
  >   $ function warnonly {
  >   > }
  >   $ diff -N aaa
  >   $ function onwarn {}
  > NO_CHECK_EOF
  $ "$check_code" warning.t
  $ "$check_code" --warn warning.t
  warning.t:1:
   >   $ function warnonly {
   warning: don't use 'function', use old style
  warning.t:3:
   >   $ diff -N aaa
   warning: don't use 'diff -N'
  warning.t:4:
   >   $ function onwarn {}
   warning: don't use 'function', use old style
  [1]
  $ cat > error.t <<NO_CHECK_EOF
  >   $ [ foo == bar ]
  > NO_CHECK_EOF
  $ "$check_code" error.t
  error.t:1:
   >   $ [ foo == bar ]
   [ foo == bar ] is a bashism, use [ foo = bar ] instead
  [1]
  $ rm error.t
  $ cat > raise-format.py <<NO_CHECK_EOF
  > raise SomeException, message
  > # this next line is okay
  > raise SomeException(arg1, arg2)
  > NO_CHECK_EOF
  $ "$check_code" not-existing.py raise-format.py
  Skipping*not-existing.py* (glob)
  raise-format.py:1:
   > raise SomeException, message
   don't use old-style two-argument raise, use Exception(message)
  [1]

  $ cat <<NO_CHECK_EOF > tab.t
  > 	indent
  >   > 	heredoc
  > NO_CHECK_EOF
  $ "$check_code" tab.t
  tab.t:1:
   > 	indent
   don't use tabs to indent
  [1]
  $ rm tab.t

  $ cat > rst.py <<NO_CHECK_EOF
  > """problematic rst text
  > 
  > .. note::
  >     wrong
  > """
  > 
  > '''
  > 
  > .. note::
  > 
  >     valid
  > 
  > new text
  > 
  >     .. note::
  > 
  >         also valid
  > '''
  > 
  > """mixed
  > 
  > .. note::
  > 
  >   good
  > 
  >     .. note::
  >         plus bad
  > """
  > NO_CHECK_EOF
  $ $check_code -w rst.py
  rst.py:3:
   > .. note::
   warning: add two newlines after '.. note::'
  rst.py:26:
   >     .. note::
   warning: add two newlines after '.. note::'
  [1]

  $ cat > ./map-inside-gettext.py <<NO_CHECK_EOF
  > print(_("map inside gettext %s" % v))
  > 
  > print(_("concatenating " " by " " space %s" % v))
  > print(_("concatenating " + " by " + " '+' %s" % v))
  > 
  > print(_("mapping operation in different line %s"
  >         % v))
  > 
  > print(_(
  >         "leading spaces inside of '(' %s" % v))
  > NO_CHECK_EOF
  $ "$check_code" ./map-inside-gettext.py
  ./map-inside-gettext.py:1:
   > print(_("map inside gettext %s" % v))
   don't use % inside _()
  ./map-inside-gettext.py:3:
   > print(_("concatenating " " by " " space %s" % v))
   don't use % inside _()
  ./map-inside-gettext.py:4:
   > print(_("concatenating " + " by " + " '+' %s" % v))
   don't use % inside _()
  ./map-inside-gettext.py:6:
   > print(_("mapping operation in different line %s"
   don't use % inside _()
  ./map-inside-gettext.py:9:
   > print(_(
   don't use % inside _()
  [1]

web templates

  $ mkdir -p mercurial/templates
  $ cat > mercurial/templates/example.tmpl <<NO_CHECK_EOF
  > {desc}
  > {desc|escape}
  > {desc|firstline}
  > {desc|websub}
  > NO_CHECK_EOF

  $ "$check_code" --warnings mercurial/templates/example.tmpl
  mercurial/templates/example.tmpl:2:
   > {desc|escape}
   warning: follow desc keyword with either firstline or websub
  [1]

'string join across lines with no space' detection

  $ cat > stringjoin.py <<NO_CHECK_EOF
  > foo = (' foo'
  >        'bar foo.'
  >        'bar foo:'
  >        'bar foo@'
  >        'bar foo%'
  >        'bar foo*'
  >        'bar foo+'
  >        'bar foo-'
  >        'bar')
  > NO_CHECK_EOF

'missing _() in ui message' detection

  $ cat > uigettext.py <<NO_CHECK_EOF
  > ui.status("% 10s %05d % -3.2f %*s %%"
  >           # this use '\\\\' instead of '\\', because the latter in
  >           # heredoc on shell becomes just '\'
  >           '\\\\ \n \t \0'
  >           """12345
  >           """
  >           '''.:*+-=
  >           ''' "%-6d \n 123456 .:*+-= foobar")
  > NO_CHECK_EOF

superfluous pass

  $ cat > superfluous_pass.py <<NO_CHECK_EOF
  > # correct examples
  > if foo:
  >     pass
  > else:
  >     # comment-only line means still need pass
  >     pass
  > def nothing():
  >     pass
  > class empty(object):
  >     pass
  > if whatever:
  >     passvalue(value)
  > # bad examples
  > if foo:
  >     "foo"
  >     pass
  > else: # trailing comment doesn't fool checker
  >     wat()
  >     pass
  > def nothing():
  >     "docstring means no pass"
  >     pass
  > class empty(object):
  >     """multiline
  >     docstring also
  >     means no pass"""
  >     pass
  > NO_CHECK_EOF

(Checking multiple invalid files at once examines whether caching
translation table for repquote() works as expected or not. All files
should break rules depending on result of repquote(), in this case)

  $ "$check_code" stringjoin.py uigettext.py superfluous_pass.py
  stringjoin.py:1:
   > foo = (' foo'
   string join across lines with no space
  stringjoin.py:2:
   >        'bar foo.'
   string join across lines with no space
  stringjoin.py:3:
   >        'bar foo:'
   string join across lines with no space
  stringjoin.py:4:
   >        'bar foo@'
   string join across lines with no space
  stringjoin.py:5:
   >        'bar foo%'
   string join across lines with no space
  stringjoin.py:6:
   >        'bar foo*'
   string join across lines with no space
  stringjoin.py:7:
   >        'bar foo+'
   string join across lines with no space
  stringjoin.py:8:
   >        'bar foo-'
   string join across lines with no space
  uigettext.py:1:
   > ui.status("% 10s %05d % -3.2f %*s %%"
   missing _() in ui message (use () to hide false-positives)
  superfluous_pass.py:14:
   > if foo:
   omit superfluous pass
  superfluous_pass.py:17:
   > else: # trailing comment doesn't fool checker
   omit superfluous pass
  superfluous_pass.py:20:
   > def nothing():
   omit superfluous pass
  superfluous_pass.py:23:
   > class empty(object):
   omit superfluous pass
  [1]

Check code fragments embedded in test script

  $ cat > embedded-code.t <<NO_CHECK_EOF
  > code fragment in doctest style
  >   >>> x = (1,2)
  >   ... 
  >   ... x = (1,2)
  > 
  > code fragment in heredoc style
  >   $ python <<EOF
  >   > x = (1,2)
  >   > EOF
  > 
  > code fragment in file heredoc style
  >   $ python > file.py <<EOF
  >   > x = (1,2)
  >   > EOF
  > NO_CHECK_EOF
  $ "$check_code" embedded-code.t
  embedded-code.t:2:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:4:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:8:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:13:
   > x = (1,2)
   missing whitespace after ,
  [1]

"max warnings per file" is shared by all embedded code fragments

  $ "$check_code" --per-file=3 embedded-code.t
  embedded-code.t:2:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:4:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:8:
   > x = (1,2)
   missing whitespace after ,
   (too many errors, giving up)
  [1]