view tests/test-convert-cvs-synthetic.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

#require cvs112

This feature requires use of builtin cvsps!

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create cvs repository with one project

  $ mkdir cvsrepo
  $ cd cvsrepo
  $ CVSROOT=`pwd`
  $ export CVSROOT
  $ CVS_OPTIONS=-f
  $ export CVS_OPTIONS
  $ cd ..
  $ rmdir cvsrepo
  $ cvscall()
  > {
  >     cvs -f "$@"
  > }

output of 'cvs ci' varies unpredictably, so just discard it

  $ cvsci()
  > {
  >     sleep 1
  >     cvs -f ci "$@" >/dev/null
  > }
  $ cvscall -d "$CVSROOT" init
  $ mkdir cvsrepo/proj
  $ cvscall -q co proj

create file1 on the trunk

  $ cd proj
  $ touch file1
  $ cvscall -Q add file1
  $ cvsci -m"add file1 on trunk" file1

create two branches

  $ cvscall -q tag -b v1_0
  T file1
  $ cvscall -q tag -b v1_1
  T file1

create file2 on branch v1_0

  $ cvscall -Q up -rv1_0
  $ touch file2
  $ cvscall -Q add file2
  $ cvsci -m"add file2" file2

create file3, file4 on branch v1_1

  $ cvscall -Q up -rv1_1
  $ touch file3
  $ touch file4
  $ cvscall -Q add file3 file4
  $ cvsci -m"add file3, file4 on branch v1_1" file3 file4

merge file2 from v1_0 to v1_1

  $ cvscall -Q up -jv1_0
  $ cvsci -m"MERGE from v1_0: add file2"
  cvs commit: Examining .

Step things up a notch: now we make the history really hairy, with
changes bouncing back and forth between trunk and v1_2 and merges
going both ways.  (I.e., try to model the real world.)
create branch v1_2

  $ cvscall -Q up -A
  $ cvscall -q tag -b v1_2
  T file1

create file5 on branch v1_2

  $ cvscall -Q up -rv1_2
  $ touch file5
  $ cvs -Q add file5
  $ cvsci -m"add file5 on v1_2"
  cvs commit: Examining .

create file6 on trunk post-v1_2

  $ cvscall -Q up -A
  $ touch file6
  $ cvscall -Q add file6
  $ cvsci -m"add file6 on trunk post-v1_2"
  cvs commit: Examining .

merge file5 from v1_2 to trunk

  $ cvscall -Q up -A
  $ cvscall -Q up -jv1_2 file5
  $ cvsci -m"MERGE from v1_2: add file5"
  cvs commit: Examining .

merge file6 from trunk to v1_2

  $ cvscall -Q up -rv1_2
  $ cvscall up -jHEAD file6
  U file6
  $ cvsci -m"MERGE from HEAD: add file6"
  cvs commit: Examining .

cvs rlog output

  $ cvscall -q rlog proj | egrep '^(RCS file|revision)'
  RCS file: $TESTTMP/cvsrepo/proj/file1,v
  revision 1.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file2,v
  revision 1.1
  revision 1.1.4.2
  revision 1.1.4.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file3,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file4,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file5,v
  revision 1.2
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file6,v
  revision 1.1
  revision 1.1.2.2
  revision 1.1.2.1

convert to hg (#1)

  $ cd ..
  $ hg convert --datesort proj proj.hg
  initializing destination proj.hg repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#1)

  $ hg -R proj.hg log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk
  

convert to hg (#2: with merge detection)

  $ hg convert \
  >   --config convert.cvsps.mergefrom='"^MERGE from (\S+):"' \
  >   --datesort \
  >   proj proj.hg2
  initializing destination proj.hg2 repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#2)

  $ hg -R proj.hg2 log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk