view tests/test-convert-splicemap.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert=" >> $HGRCPATH
  $ glog()
  > {
  >     hg log -G --template '{rev}:{node|short} "{desc|firstline}"\
  >  files: {files}\n' "$@"
  > }
  $ hg init repo1
  $ cd repo1
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo b > b
  $ echo a >> a
  $ hg ci -Am addb
  adding b
  $ PARENTID1=`hg id --debug -i`
  $ echo c > c
  $ hg ci -Am addc
  adding c
  $ PARENTID2=`hg id --debug -i`
  $ cd ..
  $ glog -R repo1
  @  2:e55c719b85b6 "addc" files: c
  |
  o  1:6d4c2037ddc2 "addb" files: a b
  |
  o  0:07f494440405 "adda" files: a
  

  $ hg init repo2
  $ cd repo2
  $ echo b > a
  $ echo d > d
  $ hg ci -Am addaandd
  adding a
  adding d
  $ INVALIDID1=afd12345af
  $ INVALIDID2=28173x36ddd1e67bf7098d541130558ef5534a86
  $ CHILDID1=`hg id --debug -i`
  $ echo d >> d
  $ hg ci -Am changed
  $ CHILDID2=`hg id --debug -i`
  $ echo e > e
  $ hg ci -Am adde
  adding e
  $ cd ..
  $ glog -R repo2
  @  2:a39b65753b0a "adde" files: e
  |
  o  1:e4ea00df9189 "changed" files: d
  |
  o  0:527cdedf31fb "addaandd" files: a d
  

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $CHILDID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap2

  $ cat > splicemap <<EOF
  > $CHILDID2 $PARENTID1, $PARENTID2, $PARENTID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap3

  $ cat > splicemap <<EOF
  > $INVALIDID1 $INVALIDID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: splicemap entry afd12345af is not a valid revision identifier
  [255]

splice repo2 on repo1

  $ cat > splicemap <<EOF
  > $CHILDID1 $PARENTID1
  > $CHILDID2 $PARENTID2,$CHILDID1
  > 
  > EOF
  $ cat splicemap
  527cdedf31fbd5ea708aa14eeecf53d4676f38db 6d4c2037ddc2cb2627ac3a244ecce35283268f8e
  e4ea00df91897da3079a10fab658c1eddba6617b e55c719b85b60e5102fac26110ba626e7cb6b7dc,527cdedf31fbd5ea708aa14eeecf53d4676f38db
  
  $ hg clone repo1 target1
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg convert --splicemap splicemap repo2 target1
  scanning source...
  sorting...
  converting...
  2 addaandd
  spliced in 6d4c2037ddc2cb2627ac3a244ecce35283268f8e as parents of 527cdedf31fbd5ea708aa14eeecf53d4676f38db
  1 changed
  spliced in e55c719b85b60e5102fac26110ba626e7cb6b7dc and 527cdedf31fbd5ea708aa14eeecf53d4676f38db as parents of e4ea00df91897da3079a10fab658c1eddba6617b
  0 adde
  $ glog -R target1
  o  5:16bc847b02aa "adde" files: e
  |
  o    4:e30e4fee3418 "changed" files: d
  |\
  | o  3:e673348c3a3c "addaandd" files: a d
  | |
  @ |  2:e55c719b85b6 "addc" files: c
  |/
  o  1:6d4c2037ddc2 "addb" files: a b
  |
  o  0:07f494440405 "adda" files: a
  



Test splicemap and conversion order

  $ hg init ordered
  $ cd ordered
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ hg branch branch
  marked working directory as branch branch
  (branches are permanent and global, did you want a bookmark?)
  $ echo a >> a
  $ hg ci -Am changea
  $ echo a >> a
  $ hg ci -Am changeaagain
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > b
  $ hg ci -Am addb
  adding b

We want 2 to depend on 1 and 3. Since 3 is always converted after 2,
the bug should be exhibited with all conversion orders.

  $ cat > ../splicemap <<EOF
  > `(hg id -r 2 -i --debug)` `(hg id -r 1 -i --debug)`, `(hg id -r 3 -i --debug)`
  > EOF
  $ cd ..
  $ cat splicemap
  7c364e7fa7d70ae525610c016317ed717b519d97 717d54d67e6c31fd75ffef2ff3042bdd98418437, 102a90ea7b4a3361e4082ed620918c261189a36a

Test regular conversion

  $ hg convert --splicemap splicemap ordered ordered-hg1
  initializing destination ordered-hg1 repository
  scanning source...
  sorting...
  converting...
  3 adda
  2 changea
  1 addb
  0 changeaagain
  spliced in 717d54d67e6c31fd75ffef2ff3042bdd98418437 and 102a90ea7b4a3361e4082ed620918c261189a36a as parents of 7c364e7fa7d70ae525610c016317ed717b519d97
  $ glog -R ordered-hg1
  o    3:4cb04b9afbf2 "changeaagain" files: a
  |\
  | o  2:102a90ea7b4a "addb" files: b
  | |
  o |  1:717d54d67e6c "changea" files: a
  |/
  o  0:07f494440405 "adda" files: a
  

Test conversion with parent revisions already in dest, using source
and destination identifiers. Test unknown splicemap target.

  $ hg convert -r1 ordered ordered-hg2
  initializing destination ordered-hg2 repository
  scanning source...
  sorting...
  converting...
  1 adda
  0 changea
  $ hg convert -r3 ordered ordered-hg2
  scanning source...
  sorting...
  converting...
  0 addb
  $ cat > splicemap <<EOF
  > `(hg -R ordered id -r 2 -i --debug)` \
  > `(hg -R ordered-hg2 id -r 1 -i --debug)`,\
  > `(hg -R ordered-hg2 id -r 2 -i --debug)`
  > deadbeef102a90ea7b4a3361e4082ed620918c26 deadbeef102a90ea7b4a3361e4082ed620918c27
  > EOF
  $ hg convert --splicemap splicemap ordered ordered-hg2
  scanning source...
  splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring
  sorting...
  converting...
  0 changeaagain
  spliced in 717d54d67e6c31fd75ffef2ff3042bdd98418437 and 102a90ea7b4a3361e4082ed620918c261189a36a as parents of 7c364e7fa7d70ae525610c016317ed717b519d97
  $ glog -R ordered-hg2
  o    3:4cb04b9afbf2 "changeaagain" files: a
  |\
  | o  2:102a90ea7b4a "addb" files: b
  | |
  o |  1:717d54d67e6c "changea" files: a
  |/
  o  0:07f494440405 "adda" files: a
  

Test empty conversion

  $ hg convert --splicemap splicemap ordered ordered-hg2
  scanning source...
  splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring
  sorting...
  converting...

Test clonebranches

  $ hg --config convert.hg.clonebranches=true convert \
  >   --splicemap splicemap ordered ordered-hg3
  initializing destination ordered-hg3 repository
  scanning source...
  abort: revision 717d54d67e6c31fd75ffef2ff3042bdd98418437 not found in destination repository (lookups with clonebranches=true are not implemented)
  [255]

Test invalid dependency

  $ cat > splicemap <<EOF
  > `(hg -R ordered id -r 2 -i --debug)` \
  > deadbeef102a90ea7b4a3361e4082ed620918c26,\
  > `(hg -R ordered-hg2 id -r 2 -i --debug)`
  > EOF
  $ hg convert --splicemap splicemap ordered ordered-hg4
  initializing destination ordered-hg4 repository
  scanning source...
  abort: unknown splice map parent: deadbeef102a90ea7b4a3361e4082ed620918c26
  [255]