view tests/test-init.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

This test tries to exercise the ssh functionality with a dummy script

  $ checknewrepo()
  > {
  >    name=$1
  >    if [ -d "$name"/.hg/store ]; then
  >    echo store created
  >    fi
  >    if [ -f "$name"/.hg/00changelog.i ]; then
  >    echo 00changelog.i created
  >    fi
  >    cat "$name"/.hg/requires
  > }

creating 'local'

  $ hg init local
  $ checknewrepo local
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)
  $ echo this > local/foo
  $ hg ci --cwd local -A -m "init"
  adding foo

test custom revlog chunk cache sizes

  $ hg --config format.chunkcachesize=0 log -R local -pv
  abort: revlog chunk cache size 0 is not greater than 0!
  [255]
  $ hg --config format.chunkcachesize=1023 log -R local -pv
  abort: revlog chunk cache size 1023 is not a power of 2!
  [255]
  $ hg --config format.chunkcachesize=1024 log -R local -pv
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo
  description:
  init
  
  
  diff -r 000000000000 -r 08b9e9f63b32 foo
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +this
  

creating repo with format.usestore=false

  $ hg --config format.usestore=false init old
  $ checknewrepo old
  generaldelta
  revlogv1
  testonly-simplestore (reposimplestore !)
  sparserevlog

creating repo with format.usefncache=false

  $ hg --config format.usefncache=false init old2
  $ checknewrepo old2
  store created
  00changelog.i created
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

creating repo with format.dotencode=false

  $ hg --config format.dotencode=false init old3
  $ checknewrepo old3
  store created
  00changelog.i created
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

creating repo with format.dotencode=false

  $ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4
  $ checknewrepo old4
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store
  testonly-simplestore (reposimplestore !)

test failure

  $ hg init local
  abort: repository local already exists!
  [255]

init+push to remote2

  $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  $ hg incoming -R remote2 local
  comparing with local
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     init
  

  $ hg push -R local -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  pushing to ssh://user@dummy/remote2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

clone to remote1

  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

The largefiles extension doesn't crash
  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remotelf --config extensions.largefiles=
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

init to existing repo

  $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

clone to existing repo

  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

output of dummyssh

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg init remote2
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio
  Got arguments 1:user@dummy 2:hg init remotelf
  Got arguments 1:user@dummy 2:hg -R remotelf serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg init remote1

comparing repositories

  $ hg tip -q -R local
  0:08b9e9f63b32
  $ hg tip -q -R remote1
  0:08b9e9f63b32
  $ hg tip -q -R remote2
  0:08b9e9f63b32

check names for repositories (clashes with URL schemes, special chars)

  $ for i in bundle file hg http https old-http ssh static-http "with space"; do
  >   printf "hg init \"$i\"... "
  >   hg init "$i"
  >   test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed"
  > done
  hg init "bundle"... ok
  hg init "file"... ok
  hg init "hg"... ok
  hg init "http"... ok
  hg init "https"... ok
  hg init "old-http"... ok
  hg init "ssh"... ok
  hg init "static-http"... ok
  hg init "with space"... ok
#if eol-in-paths
/* " " is not a valid name for a directory on Windows */
  $ hg init " "
  $ test -d " "
  $ test -d " /.hg"
#endif

creating 'local/sub/repo'

  $ hg init local/sub/repo
  $ checknewrepo local/sub/repo
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

prepare test of init of url configured from paths

  $ echo '[paths]' >> $HGRCPATH
  $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
  $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH

init should (for consistency with clone) expand the url

  $ hg init somewhere
  $ checknewrepo "url from paths"
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

verify that clone also expand urls

  $ hg clone somewhere elsewhere
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ checknewrepo "another paths url"
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

clone bookmarks

  $ hg -R local bookmark test
  $ hg -R local bookmarks
   * test                      0:08b9e9f63b32
  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  exporting bookmark test
  $ hg -R remote-bookmarks bookmarks
     test                      0:08b9e9f63b32

Check format constraint
-----------------------

  $ hg init issue6056 --config format.usegeneraldelta=0 --config format.sparse-revlog=0
  $ cd issue6056
  $ echo foo > 1
  $ echo foo > 2
  $ echo foo > 3
  $ echo foo > 4
  $ echo foo > 5
  $ hg add *

Build a bogus repository (sparserevlog without general delta)

  $ hg commit -m 'initial changesets'
  $ echo 'sparserevlog' >> .hg/requires
  $ for x in `$TESTDIR/seq.py 100`; do
  >     echo $x >> `expr $x % 5 + 1`
  >     hg commit -m $x
  > done
  $ cd ..