view tests/test-largefiles-wireproto.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

#testcases sshv1 sshv2

#if sshv2
  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > sshpeer.advertise-v2 = true
  > sshserver.support-v2 = true
  > EOF
#endif

This file contains testcases that tend to be related to the wire protocol part
of largefiles.

  $ USERCACHE="$TESTTMP/cache"; export USERCACHE
  $ mkdir "${USERCACHE}"
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > largefiles=
  > purge=
  > rebase=
  > transplant=
  > [phases]
  > publish=False
  > [largefiles]
  > minsize=2
  > patterns=glob:**.dat
  > usercache=${USERCACHE}
  > [web]
  > allow-archive = zip
  > [hooks]
  > precommit=sh -c "echo \\"Invoking status precommit hook\\"; hg status"
  > EOF


#if serve
vanilla clients not locked out from largefiles servers on vanilla repos
  $ mkdir r1
  $ cd r1
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..
  $ hg serve -R r1 -d -p $HGPORT --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT r2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets b6eb3a2e2efe (1 drafts)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

largefiles clients still work with vanilla servers
  $ hg serve --config extensions.largefiles=! -R r1 -d -p $HGPORT1 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets b6eb3a2e2efe (1 drafts)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif

vanilla clients locked out from largefiles http repos
  $ mkdir r4
  $ cd r4
  $ hg init
  $ echo c1 > f1
  $ hg add --large f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..

largefiles can be pushed locally (issue3583)
  $ hg init dest
  $ cd r4
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  changeset:   0:639881c12b4c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     m1
  
  $ hg push ../dest
  pushing to ../dest
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

exit code with nothing outgoing (issue3611)
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  no changes found
  [1]
  $ cd ..

#if serve
  $ hg serve -R r4 -d -p $HGPORT2 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT2 r5
  abort: remote error:
  
  This repository uses the largefiles extension.
  
  Please enable it in your Mercurial config file.
  [255]

used all HGPORTs, kill all daemons
  $ killdaemons.py
#endif

vanilla clients locked out from largefiles ssh repos
  $ hg --config extensions.largefiles=! clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/r4 r5
  remote: 
  remote: This repository uses the largefiles extension.
  remote: 
  remote: Please enable it in your Mercurial config file.
  remote: 
  remote: -
  abort: remote error
  (check previous remote output)
  [255]

#if serve

largefiles clients refuse to push largefiles repos to vanilla servers
  $ mkdir r6
  $ cd r6
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cat >> .hg/hgrc <<!
  > [web]
  > push_ssl = false
  > allow_push = *
  > !
  $ cd ..
  $ hg clone r6 r7
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r7
  $ echo c2 > f2
  $ hg add --large f2
  $ hg commit -m "m2"
  Invoking status precommit hook
  A f2
  $ hg verify --large
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 2 files
  searching 1 changesets for largefiles
  verified existence of 1 revisions of 1 largefiles
  $ hg serve --config extensions.largefiles=! -R ../r6 -d -p $HGPORT --pid-file ../hg.pid
  $ cat ../hg.pid >> $DAEMON_PIDS
  $ hg push http://localhost:$HGPORT
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: http://localhost:$HGPORT/ does not appear to be a largefile store
  [255]
  $ cd ..

putlfile errors are shown (issue3123)
Corrupt the cached largefile in r7 and move it out of the servers usercache
  $ mv r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 .
  $ echo 'client side corruption' > r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ rm "$USERCACHE/4cdac4d8b084d0b599525cf732437fb337d422a8"
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT1 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  remote: largefiles: failed to put 4cdac4d8b084d0b599525cf732437fb337d422a8 into store: largefile contents do not match hash
  abort: remotestore: could not put $TESTTMP/r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 to remote store http://localhost:$HGPORT1/
  [255]
  $ mv 4cdac4d8b084d0b599525cf732437fb337d422a8 r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
Push of file that exists on server but is corrupted - magic healing would be nice ... but too magic
  $ echo "server side corruption" > empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ cat empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  server side corruption
  $ rm -rf empty

Push a largefiles repository to a served empty repository
  $ hg init r8
  $ echo c3 > r8/f1
  $ hg add --large r8/f1 -R r8
  $ hg commit -m "m1" -R r8
  Invoking status precommit hook
  A f1
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT2 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ rm "${USERCACHE}"/*
  $ hg push -R r8 http://localhost:$HGPORT2/#default
  pushing to http://localhost:$HGPORT2/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ [ -f "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ -f empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]

Clone over http, no largefiles pulled on clone.

  $ hg clone http://localhost:$HGPORT2/#default http-clone -U
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets cf03e5bb9936 (1 drafts)

Archive contains largefiles
  >>> import os
  >>> from mercurial import urllibcompat
  >>> u = 'http://localhost:%s/archive/default.zip' % os.environ['HGPORT2']
  >>> with open('archive.zip', 'wb') as f:
  ...     f.write(urllibcompat.urlreq.urlopen(u).read()) and None
  $ unzip -t archive.zip
  Archive:  archive.zip
      testing: empty-default/.hg_archival.txt*OK (glob)
      testing: empty-default/f1*OK (glob)
  No errors detected in compressed data of archive.zip.

test 'verify' with remotestore:

  $ rm "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone verify --large --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files
  searching 1 changesets for largefiles
  changeset 0:cf03e5bb9936: f1 missing
  verified existence of 1 revisions of 1 largefiles
  [1]
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone -q verify --large --lfa

largefiles pulled on update - a largefile missing on the server:
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: largefile 02a439e5c31c526465ab1a0ca1f431f76b827b90 not available from http://localhost:$HGPORT2/
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - a largefile corrupted on the server:
  $ echo corruption > empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: data corruption (expected 02a439e5c31c526465ab1a0ca1f431f76b827b90, got 6a7bb2556144babe3899b25e5428123735bb1e27)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ [ ! -f http-clone/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ ! -f http-clone/f1 ]
  $ [ ! -f http-clone-usercache ]
  $ hg -R http-clone verify --large --lfc
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files
  searching 1 changesets for largefiles
  verified contents of 1 revisions of 1 largefiles
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - no server side problems:
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone --debug up --config largefiles.usercache=http-clone-usercache --config progress.debug=true
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: cf03e5bb9936
   .hglf/f1: remote created -> g
  getting .hglf/f1
  updating: .hglf/f1 1/1 files (100.00%)
  getting changed largefiles
  using http://localhost:$HGPORT2/
  sending capabilities command
  sending statlfile command
  getting largefiles: 0/1 files (0.00%)
  getting f1:02a439e5c31c526465ab1a0ca1f431f76b827b90
  sending getlfile command
  found 02a439e5c31c526465ab1a0ca1f431f76b827b90 in store
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls http-clone-usercache/*
  http-clone-usercache/02a439e5c31c526465ab1a0ca1f431f76b827b90

  $ rm -rf empty http-clone*

used all HGPORTs, kill all daemons
  $ killdaemons.py

largefiles should batch verify remote calls

  $ hg init batchverifymain
  $ cd batchverifymain
  $ echo "aaa" >> a
  $ hg add --large a
  $ hg commit -m "a"
  Invoking status precommit hook
  A a
  $ echo "bbb" >> b
  $ hg add --large b
  $ hg commit -m "b"
  Invoking status precommit hook
  A b
  $ cd ..
  $ hg serve -R batchverifymain -d -p $HGPORT --pid-file hg.pid \
  > -A access.log
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg clone --noupdate http://localhost:$HGPORT batchverifyclone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 567253b0f523:04d19c27a332 (2 drafts)
  $ hg -R batchverifyclone verify --large --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 2 files
  searching 2 changesets for largefiles
  verified existence of 2 revisions of 2 largefiles
  $ tail -1 access.log
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=statlfile+sha%3D972a1a11f19934401291cc99117ec614933374ce%3Bstatlfile+sha%3Dc801c9cfe94400963fcb683246217d5db77f9a9a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $ hg -R batchverifyclone update
  getting changed largefiles
  2 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Clear log file before next test

  $ printf "" > access.log

Verify should check file on remote server only when file is not
available locally.

  $ echo "ccc" >> batchverifymain/c
  $ hg -R batchverifymain status
  ? c
  $ hg -R batchverifymain add --large batchverifymain/c
  $ hg -R batchverifymain commit -m "c"
  Invoking status precommit hook
  A c
  $ hg -R batchverifyclone pull
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 6bba8cb6935d (1 drafts)
  (run 'hg update' to get a working copy)
  $ hg -R batchverifyclone verify --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 3 changesets with 3 changes to 3 files
  searching 3 changesets for largefiles
  verified existence of 3 revisions of 3 largefiles
  $ tail -1 access.log
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=statlfile HTTP/1.1" 200 - x-hgarg-1:sha=c8559c3c9cfb42131794b7d8009230403b9b454c x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)

  $ killdaemons.py

largefiles should not ask for password again after successful authorization

  $ hg init credentialmain
  $ cd credentialmain
  $ echo "aaa" >> a
  $ hg add --large a
  $ hg commit -m "a"
  Invoking status precommit hook
  A a

Before running server clear the user cache to force clone to download
a large file from the server rather than to get it from the cache

  $ rm "${USERCACHE}"/*

  $ cd ..

  $ hg serve --config extensions.x=$TESTDIR/httpserverauth.py -R credentialmain \
  >          -d -p $HGPORT --pid-file hg.pid -A access.log
  $ cat hg.pid >> $DAEMON_PIDS
  $ cat << EOF > get_pass.py
  > import getpass
  > def newgetpass(arg):
  >   return "pass"
  > getpass.getpass = newgetpass
  > EOF
  $ hg clone --config ui.interactive=true --config extensions.getpass=get_pass.py \
  >          http://user@localhost:$HGPORT credentialclone
  http authorization required for http://localhost:$HGPORT/
  realm: mercurial
  user: user
  password: requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 567253b0f523 (1 drafts)
  updating to branch default
  getting changed largefiles
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py
  $ rm hg.pid access.log

#endif