view tests/test-pull.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

#require serve

#testcases sshv1 sshv2

#if sshv2
  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > sshpeer.advertise-v2 = true
  > sshserver.support-v2 = true
  > EOF
#endif

  $ hg init test
  $ cd test

  $ echo foo>foo
  $ hg addremove
  adding foo
  $ hg commit -m 1

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files

  $ hg serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ cd ..

  $ hg clone --pull http://foo:bar@localhost:$HGPORT/ copy
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 340e38bdcde4
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd copy
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files

  $ hg co
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat foo
  foo

  $ hg manifest --debug
  2ed2a3912a0b24502043eae84ee4b279c18b90dd 644   foo

  $ hg pull
  pulling from http://foo@localhost:$HGPORT/
  searching for changes
  no changes found

  $ hg rollback --dry-run --verbose
  repository tip rolled back to revision -1 (undo pull: http://foo:***@localhost:$HGPORT/)

Test pull of non-existing 20 character revision specification, making sure plain ascii identifiers
not are encoded like a node:

  $ hg pull -r 'xxxxxxxxxxxxxxxxxxxy'
  pulling from http://foo@localhost:$HGPORT/
  abort: unknown revision 'xxxxxxxxxxxxxxxxxxxy'!
  [255]
  $ hg pull -r 'xxxxxxxxxxxxxxxxxx y'
  pulling from http://foo@localhost:$HGPORT/
  abort: unknown revision 'xxxxxxxxxxxxxxxxxx y'!
  [255]

Test pull of working copy revision
  $ hg pull -r 'ffffffffffff'
  pulling from http://foo@localhost:$HGPORT/
  abort: unknown revision 'ffffffffffff'!
  [255]

Issue622: hg init && hg pull -u URL doesn't checkout default branch

  $ cd ..
  $ hg init empty
  $ cd empty
  $ hg pull -u ../test
  pulling from ../test
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 340e38bdcde4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test 'file:' uri handling:

  $ hg pull -q file://../test-does-not-exist
  abort: file:// URLs can only refer to localhost
  [255]

  $ hg pull -q file://../test
  abort: file:// URLs can only refer to localhost
  [255]

MSYS changes 'file:' into 'file;'

#if no-msys
  $ hg pull -q file:../test  # no-msys
#endif

It's tricky to make file:// URLs working on every platform with
regular shell commands.

  $ URL=`"$PYTHON" -c "from __future__ import print_function; import os; print('file://foobar' + ('/' + os.getcwd().replace(os.sep, '/')).replace('//', '/') + '/../test')"`
  $ hg pull -q "$URL"
  abort: file:// URLs can only refer to localhost
  [255]

  $ URL=`"$PYTHON" -c "from __future__ import print_function; import os; print('file://localhost' + ('/' + os.getcwd().replace(os.sep, '/')).replace('//', '/') + '/../test')"`
  $ hg pull -q "$URL"

SEC: check for unsafe ssh url

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = sh -c "read l; read l; read l"
  > EOF

  $ hg pull 'ssh://-oProxyCommand=touch${IFS}owned/path'
  pulling from ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg pull 'ssh://%2DoProxyCommand=touch${IFS}owned/path'
  pulling from ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg pull 'ssh://fakehost|touch${IFS}owned/path'
  pulling from ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
  abort: no suitable response from remote hg!
  [255]
  $ hg pull 'ssh://fakehost%7Ctouch%20owned/path'
  pulling from ssh://fakehost%7Ctouch%20owned/path
  abort: no suitable response from remote hg!
  [255]

  $ [ ! -f owned ] || echo 'you got owned'

  $ cd ..