view tests/test-sparse-merges.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

test merging things outside of the sparse checkout

  $ hg init myrepo
  $ cd myrepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > EOF

  $ echo foo > foo
  $ echo bar > bar
  $ hg add foo bar
  $ hg commit -m initial

  $ hg branch feature
  marked working directory as branch feature
  (branches are permanent and global, did you want a bookmark?)
  $ echo bar2 >> bar
  $ hg commit -m 'feature - bar2'

  $ hg update -q default
  $ hg debugsparse --exclude 'bar**'

  $ hg merge feature
  temporarily included 1 file(s) in the sparse checkout for merging
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

Verify bar was merged temporarily

  $ ls
  bar
  foo
  $ hg status
  M bar

Verify bar disappears automatically when the working copy becomes clean

  $ hg commit -m "merged"
  cleaned up 1 temporarily added file(s) from the sparse checkout
  $ hg status
  $ ls
  foo

  $ hg cat -r . bar
  bar
  bar2

Test merging things outside of the sparse checkout that are not in the working
copy

  $ hg strip -q -r . --config extensions.strip=
  $ hg up -q feature
  $ touch branchonly
  $ hg ci -Aqm 'add branchonly'

  $ hg up -q default
  $ hg debugsparse -X branchonly
  $ hg merge feature
  temporarily included 2 file(s) in the sparse checkout for merging
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cd ..

Tests merging a file which is modified in one branch and deleted in another and
file is excluded from sparse checkout

  $ hg init ytest
  $ cd ytest
  $ echo "syntax: glob" >> .hgignore
  $ echo "*.orig" >> .hgignore
  $ hg ci -Aqm "added .hgignore"
  $ for ch in a d; do echo foo > $ch; hg ci -Aqm "added "$ch; done;
  $ cat >> .hg/hgrc <<EOF
  > [alias]
  > glog = log -GT "{rev}:{node|short} {desc}"
  > [extensions]
  > sparse =
  > EOF

  $ hg glog
  @  2:f29feff37cfc added d
  |
  o  1:617125d27d6b added a
  |
  o  0:53f3774ed939 added .hgignore
  
  $ hg rm d
  $ hg ci -m "removed d"

  $ hg up '.^'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg debugsparse --reset
  $ echo bar >> d
  $ hg ci -Am "added bar to d"
  created new head

  $ hg glog
  @  4:6527874a90e4 added bar to d
  |
  | o  3:372c8558de45 removed d
  |/
  o  2:f29feff37cfc added d
  |
  o  1:617125d27d6b added a
  |
  o  0:53f3774ed939 added .hgignore
  
  $ hg debugsparse --exclude "d"
  $ ls
  a

  $ hg merge
  temporarily included 1 file(s) in the sparse checkout for merging
  file 'd' was deleted in other [merge rev] but was modified in local [working copy].
  You can use (c)hanged version, (d)elete, or leave (u)nresolved.
  What do you want to do? u
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cd ..

Testing merging of a file which is renamed+modified on one side and modified on
another

  $ hg init mvtest
  $ cd mvtest
  $ echo "syntax: glob" >> .hgignore
  $ echo "*.orig" >> .hgignore
  $ hg ci -Aqm "added .hgignore"
  $ for ch in a d; do echo foo > $ch; hg ci -Aqm "added "$ch; done;
  $ cat >> .hg/hgrc <<EOF
  > [alias]
  > glog = log -GT "{rev}:{node|short} {desc}"
  > [extensions]
  > sparse =
  > EOF

  $ hg glog
  @  2:f29feff37cfc added d
  |
  o  1:617125d27d6b added a
  |
  o  0:53f3774ed939 added .hgignore
  
  $ echo babar >> a
  $ hg ci -m "added babar to a"

  $ hg up '.^'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg mv a amove
  $ hg ci -m "moved a to amove"
  created new head

  $ hg up 3
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg glog
  o  4:5d1e85955f6d moved a to amove
  |
  | @  3:a06e41a6c16c added babar to a
  |/
  o  2:f29feff37cfc added d
  |
  o  1:617125d27d6b added a
  |
  o  0:53f3774ed939 added .hgignore
  
  $ hg debugsparse --exclude "a"
  $ ls
  d

  $ hg merge
  temporarily included 1 file(s) in the sparse checkout for merging
  merging a and amove to amove
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg up -C 4
  cleaned up 1 temporarily added file(s) from the sparse checkout
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge
  merging amove and a to amove
  abort: cannot add 'a' - it is outside the sparse checkout
  (include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
  [255]