view tests/test-wireproto-command-filedata.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

  $ . $TESTDIR/wireprotohelpers.sh

  $ hg init server
  $ enablehttpv2 server
  $ cd server
  $ cat > a << EOF
  > a0
  > 00000000000000000000000000000000000000
  > 11111111111111111111111111111111111111
  > EOF
  $ echo b0 > b
  $ mkdir -p dir0/child0 dir0/child1 dir1
  $ echo c0 > dir0/c
  $ echo d0 > dir0/d
  $ echo e0 > dir0/child0/e
  $ echo f0 > dir0/child1/f
  $ hg -q commit -A -m 'commit 0'

  $ echo a1 >> a
  $ echo d1 > dir0/d
  $ hg commit -m 'commit 1'
  $ echo f1 > dir0/child1/f
  $ hg commit -m 'commit 2'

  $ hg -q up -r 0
  $ echo a2 >> a
  $ hg commit -m 'commit 3'
  created new head

Create multiple heads introducing the same changeset

  $ hg -q up -r 0
  $ echo foo > dupe-file
  $ hg commit -Am 'dupe 1'
  adding dupe-file
  created new head
  $ hg -q up -r 0
  $ echo foo > dupe-file
  $ hg commit -Am 'dupe 2'
  adding dupe-file
  created new head

  $ hg log -G -T '{rev}:{node} {desc}\n'
  @  5:732c3dd7bee94242de656000e5f458e7ccfe2828 dupe 2
  |
  | o  4:4334f10897d13c3e8beb4b636f7272b4ec2d0322 dupe 1
  |/
  | o  3:5ce944d7fece1252dae06c34422b573c191b9489 commit 3
  |/
  | o  2:b3c27db01410dae01e5485d425b1440078df540c commit 2
  | |
  | o  1:3ef5e551f219ba505481d34d6b0316b017fa3f00 commit 1
  |/
  o  0:91b232a2253ce0638496f67bdfd7a4933fb51b25 commit 0
  

  $ hg --debug debugindex a
     rev linkrev nodeid                                   p1                                       p2
       0       0 649d149df43d83882523b7fb1e6a3af6f1907b39 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
       1       1 0a86321f1379d1a9ecd0579a22977af7a5acaf11 649d149df43d83882523b7fb1e6a3af6f1907b39 0000000000000000000000000000000000000000
       2       3 7e5801b6d5f03a5a54f3c47b583f7567aad43e5b 649d149df43d83882523b7fb1e6a3af6f1907b39 0000000000000000000000000000000000000000

  $ hg --debug debugindex dir0/child0/e
     rev linkrev nodeid                                   p1                                       p2
       0       0 bbba6c06b30f443d34ff841bc985c4d0827c6be4 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000

  $ hg --debug debugindex dupe-file
     rev linkrev nodeid                                   p1                                       p2
       0       4 2ed2a3912a0b24502043eae84ee4b279c18b90dd 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000

  $ hg serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Missing arguments is an error

  $ sendhttpv2peer << EOF
  > command filedata
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  abort: missing required arguments: nodes, path!
  [255]

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[]
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  abort: missing required arguments: path!
  [255]

Unknown node is an error

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa']
  >     path eval:b'a'
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  abort: unknown file node: aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa!
  [255]

Fetching a single revision returns just metadata by default

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    }
  ]

Requesting parents works

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'parents']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11',
      b'parents': [
        b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    }
  ]

Requesting revision data works
(haveparents defaults to False, so fulltext is emitted)

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          84
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\na1\n'
  ]

haveparents=False should be same as above

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  >     haveparents eval:False
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          84
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\na1\n'
  ]

haveparents=True should emit a delta

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  >     haveparents eval:True
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'deltabasenode': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
      b'fieldsfollowing': [
        [
          b'delta',
          15
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'\x00\x00\x00Q\x00\x00\x00Q\x00\x00\x00\x03a1\n'
  ]

Requesting multiple revisions works
(first revision is a fulltext since haveparents=False by default)

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x64\x9d\x14\x9d\xf4\x3d\x83\x88\x25\x23\xb7\xfb\x1e\x6a\x3a\xf6\xf1\x90\x7b\x39', b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          81
        ]
      ],
      b'node': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\n',
    {
      b'deltabasenode': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
      b'fieldsfollowing': [
        [
          b'delta',
          15
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'\x00\x00\x00Q\x00\x00\x00Q\x00\x00\x00\x03a1\n'
  ]

Revisions are sorted by DAG order, parents first

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11', b'\x64\x9d\x14\x9d\xf4\x3d\x83\x88\x25\x23\xb7\xfb\x1e\x6a\x3a\xf6\xf1\x90\x7b\x39']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          81
        ]
      ],
      b'node': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\n',
    {
      b'deltabasenode': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
      b'fieldsfollowing': [
        [
          b'delta',
          15
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'\x00\x00\x00Q\x00\x00\x00Q\x00\x00\x00\x03a1\n'
  ]

Requesting parents and revision data works

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x7e\x58\x01\xb6\xd5\xf0\x3a\x5a\x54\xf3\xc4\x7b\x58\x3f\x75\x67\xaa\xd4\x3e\x5b']
  >     path eval:b'a'
  >     fields eval:[b'parents', b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          84
        ]
      ],
      b'node': b'~X\x01\xb6\xd5\xf0:ZT\xf3\xc4{X?ug\xaa\xd4>[',
      b'parents': [
        b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\na2\n'
  ]

Linknode for duplicate revision is the initial revision

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x2e\xd2\xa3\x91\x2a\x0b\x24\x50\x20\x43\xea\xe8\x4e\xe4\xb2\x79\xc1\x8b\x90\xdd']
  >     path eval:b'dupe-file'
  >     fields eval:[b'linknode', b'parents', b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          4
        ]
      ],
      b'linknode': b'C4\xf1\x08\x97\xd1<>\x8b\xebKcorr\xb4\xec-\x03"',
      b'node': b'.\xd2\xa3\x91*\x0b$P C\xea\xe8N\xe4\xb2y\xc1\x8b\x90\xdd',
      b'parents': [
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    },
    b'foo\n'
  ]

  $ cat error.log