#require serve ssl
Proper https client requires the built-in ssl from Python 2.6.
Make server certificates:
$ CERTSDIR="$TESTDIR/sslcerts"
$ cat "$CERTSDIR/priv.pem" "$CERTSDIR/pub.pem" >> server.pem
$ PRIV=`pwd`/server.pem
$ cat "$CERTSDIR/priv.pem" "$CERTSDIR/pub-not-yet.pem" > server-not-yet.pem
$ cat "$CERTSDIR/priv.pem" "$CERTSDIR/pub-expired.pem" > server-expired.pem
$ hg init test
$ cd test
$ echo foo>foo
$ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
$ echo foo>foo.d/foo
$ echo bar>foo.d/bAr.hg.d/BaR
$ echo bar>foo.d/baR.d.hg/bAR
$ hg commit -A -m 1
adding foo
adding foo.d/bAr.hg.d/BaR
adding foo.d/baR.d.hg/bAR
adding foo.d/foo
$ hg serve -p $HGPORT -d --pid-file=../hg0.pid --certificate=$PRIV
$ cat ../hg0.pid >> $DAEMON_PIDS
cacert not found
$ hg in --config web.cacerts=no-such.pem https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: could not find web.cacerts: no-such.pem
[255]
Test server address cannot be reused
#if windows
$ hg serve -p $HGPORT --certificate=$PRIV 2>&1
abort: cannot start server at 'localhost:$HGPORT': * (glob)
[255]
#else
$ hg serve -p $HGPORT --certificate=$PRIV 2>&1
abort: cannot start server at 'localhost:$HGPORT': Address already in use
[255]
#endif
$ cd ..
Our test cert is not signed by a trusted CA. It should fail to verify if
we are able to load CA certs.
#if sslcontext defaultcacerts no-defaultcacertsloaded
$ hg clone https://localhost:$HGPORT/ copy-pull
(an attempt was made to load CA certificates but none were loaded; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error)
abort: error: *certificate verify failed* (glob)
[255]
#endif
#if no-sslcontext defaultcacerts
$ hg clone https://localhost:$HGPORT/ copy-pull
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(using CA certificates from *; if you see this message, your Mercurial install is not properly configured; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message) (glob) (?)
abort: error: *certificate verify failed* (glob)
[255]
#endif
#if no-sslcontext windows
$ hg clone https://localhost:$HGPORT/ copy-pull
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
(unable to load Windows CA certificates; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message)
abort: error: *certificate verify failed* (glob)
[255]
#endif
#if no-sslcontext osx
$ hg clone https://localhost:$HGPORT/ copy-pull
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
(unable to load CA certificates; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message)
abort: localhost certificate error: no certificate received
(set hostsecurity.localhost:certfingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e config setting or use --insecure to connect insecurely)
[255]
#endif
#if defaultcacertsloaded
$ hg clone https://localhost:$HGPORT/ copy-pull
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(using CA certificates from *; if you see this message, your Mercurial install is not properly configured; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message) (glob) (?)
abort: error: *certificate verify failed* (glob)
[255]
#endif
#if no-defaultcacerts
$ hg clone https://localhost:$HGPORT/ copy-pull
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(unable to load * certificates; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this message) (glob) (?)
abort: localhost certificate error: no certificate received
(set hostsecurity.localhost:certfingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e config setting or use --insecure to connect insecurely)
[255]
#endif
Specifying a per-host certificate file that doesn't exist will abort. The full
C:/path/to/msysroot will print on Windows.
$ hg --config hostsecurity.localhost:verifycertsfile=/does/not/exist clone https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: path specified by hostsecurity.localhost:verifycertsfile does not exist: */does/not/exist (glob)
[255]
A malformed per-host certificate file will raise an error
$ echo baddata > badca.pem
#if sslcontext
$ hg --config hostsecurity.localhost:verifycertsfile=badca.pem clone https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error loading CA file badca.pem: * (glob)
(file is empty or malformed?)
[255]
#else
$ hg --config hostsecurity.localhost:verifycertsfile=badca.pem clone https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: * (glob)
[255]
#endif
A per-host certificate mismatching the server will fail verification
(modern ssl is able to discern whether the loaded cert is a CA cert)
#if sslcontext
$ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/client-cert.pem" clone https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(an attempt was made to load CA certificates but none were loaded; see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error)
abort: error: *certificate verify failed* (glob)
[255]
#else
$ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/client-cert.pem" clone https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: *certificate verify failed* (glob)
[255]
#endif
A per-host certificate matching the server's cert will be accepted
$ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/pub.pem" clone -U https://localhost:$HGPORT/ perhostgood1
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
A per-host certificate with multiple certs and one matching will be accepted
$ cat "$CERTSDIR/client-cert.pem" "$CERTSDIR/pub.pem" > perhost.pem
$ hg --config hostsecurity.localhost:verifycertsfile=perhost.pem clone -U https://localhost:$HGPORT/ perhostgood2
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
Defining both per-host certificate and a fingerprint will print a warning
$ hg --config hostsecurity.localhost:verifycertsfile="$CERTSDIR/pub.pem" --config hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03 clone -U https://localhost:$HGPORT/ caandfingerwarning
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(hostsecurity.localhost:verifycertsfile ignored when host fingerprints defined; using host fingerprints for verification)
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
$ DISABLECACERTS="--config devel.disableloaddefaultcerts=true"
Inability to verify peer certificate will result in abort
$ hg clone https://localhost:$HGPORT/ copy-pull $DISABLECACERTS
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: unable to verify security of localhost (no loaded CA certificates); refusing to connect
(see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error or set hostsecurity.localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e to trust this server)
[255]
$ hg clone --insecure https://localhost:$HGPORT/ copy-pull
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy-pull
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
$ cd test
$ echo bar > bar
$ hg commit -A -d '1 0' -m 2
adding bar
$ cd ..
pull without cacert
$ cd copy-pull
$ cat >> .hg/hgrc <<EOF
> [hooks]
> changegroup = sh -c "printenv.py changegroup"
> EOF
$ hg pull $DISABLECACERTS
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: unable to verify security of localhost (no loaded CA certificates); refusing to connect
(see https://mercurial-scm.org/wiki/SecureConnections for how to configure Mercurial to avoid this error or set hostsecurity.localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e to trust this server)
[255]
$ hg pull --insecure
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
changegroup hook: HG_HOOKNAME=changegroup HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=https://localhost:$HGPORT/
(run 'hg update' to get a working copy)
$ cd ..
cacert configured in local repo
$ cp copy-pull/.hg/hgrc copy-pull/.hg/hgrc.bu
$ echo "[web]" >> copy-pull/.hg/hgrc
$ echo "cacerts=$CERTSDIR/pub.pem" >> copy-pull/.hg/hgrc
$ hg -R copy-pull pull
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
searching for changes
no changes found
$ mv copy-pull/.hg/hgrc.bu copy-pull/.hg/hgrc
cacert configured globally, also testing expansion of environment
variables in the filename
$ echo "[web]" >> $HGRCPATH
$ echo 'cacerts=$P/pub.pem' >> $HGRCPATH
$ P="$CERTSDIR" hg -R copy-pull pull
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
searching for changes
no changes found
$ P="$CERTSDIR" hg -R copy-pull pull --insecure
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
searching for changes
no changes found
empty cacert file
$ touch emptycafile
#if sslcontext
$ hg --config web.cacerts=emptycafile -R copy-pull pull
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error loading CA file emptycafile: * (glob)
(file is empty or malformed?)
[255]
#else
$ hg --config web.cacerts=emptycafile -R copy-pull pull
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: * (glob)
[255]
#endif
cacert mismatch
$ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub.pem" \
> https://$LOCALIP:$HGPORT/
pulling from https://*:$HGPORT/ (glob)
warning: connecting to $LOCALIP using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: $LOCALIP certificate error: certificate is for localhost (glob)
(set hostsecurity.$LOCALIP:certfingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e config setting or use --insecure to connect insecurely)
[255]
$ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub.pem" \
> https://$LOCALIP:$HGPORT/ --insecure
pulling from https://*:$HGPORT/ (glob)
warning: connecting to $LOCALIP using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
warning: connection security to $LOCALIP is disabled per current settings; communication is susceptible to eavesdropping and tampering (glob)
searching for changes
no changes found
$ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-other.pem"
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: *certificate verify failed* (glob)
[255]
$ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-other.pem" \
> --insecure
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
searching for changes
no changes found
Test server cert which isn't valid yet
$ hg serve -R test -p $HGPORT1 -d --pid-file=hg1.pid --certificate=server-not-yet.pem
$ cat hg1.pid >> $DAEMON_PIDS
$ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-not-yet.pem" \
> https://localhost:$HGPORT1/
pulling from https://localhost:$HGPORT1/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: *certificate verify failed* (glob)
[255]
Test server cert which no longer is valid
$ hg serve -R test -p $HGPORT2 -d --pid-file=hg2.pid --certificate=server-expired.pem
$ cat hg2.pid >> $DAEMON_PIDS
$ hg -R copy-pull pull --config web.cacerts="$CERTSDIR/pub-expired.pem" \
> https://localhost:$HGPORT2/
pulling from https://localhost:$HGPORT2/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: *certificate verify failed* (glob)
[255]
Disabling the TLS 1.0 warning works
$ hg -R copy-pull id https://localhost:$HGPORT/ \
> --config hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03 \
> --config hostsecurity.disabletls10warning=true
5fed3813f7f5
Error message for setting ciphers is different depending on SSLContext support
#if no-sslcontext
$ P="$CERTSDIR" hg --config hostsecurity.ciphers=invalid -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
abort: *No cipher can be selected. (glob)
[255]
$ P="$CERTSDIR" hg --config hostsecurity.ciphers=HIGH -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info
5fed3813f7f5
#endif
#if sslcontext
Setting ciphers to an invalid value aborts
$ P="$CERTSDIR" hg --config hostsecurity.ciphers=invalid -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: could not set ciphers: No cipher can be selected.
(change cipher string (invalid) in config)
[255]
$ P="$CERTSDIR" hg --config hostsecurity.localhost:ciphers=invalid -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: could not set ciphers: No cipher can be selected.
(change cipher string (invalid) in config)
[255]
Changing the cipher string works
$ P="$CERTSDIR" hg --config hostsecurity.ciphers=HIGH -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
5fed3813f7f5
#endif
Fingerprints
- works without cacerts (hostfingerprints)
$ hg -R copy-pull id https://localhost:$HGPORT/ --insecure --config hostfingerprints.localhost=ec:d8:7c:d6:b3:86:d0:4f:c1:b8:b4:1c:9d:8f:5e:16:8e:ef:1c:03
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, remove the old SHA-1 fingerprint from [hostfingerprints] and add the following entry to the new [hostsecurity] section: localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
5fed3813f7f5
- works without cacerts (hostsecurity)
$ hg -R copy-pull id https://localhost:$HGPORT/ --config hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
5fed3813f7f5
$ hg -R copy-pull id https://localhost:$HGPORT/ --config hostsecurity.localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
5fed3813f7f5
- multiple fingerprints specified and first matches
$ hg --config 'hostfingerprints.localhost=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03, deadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/ --insecure
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, remove the old SHA-1 fingerprint from [hostfingerprints] and add the following entry to the new [hostsecurity] section: localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
5fed3813f7f5
$ hg --config 'hostsecurity.localhost:fingerprints=sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03, sha1:deadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
5fed3813f7f5
- multiple fingerprints specified and last matches
$ hg --config 'hostfingerprints.localhost=deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03' -R copy-pull id https://localhost:$HGPORT/ --insecure
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, remove the old SHA-1 fingerprint from [hostfingerprints] and add the following entry to the new [hostsecurity] section: localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
5fed3813f7f5
$ hg --config 'hostsecurity.localhost:fingerprints=sha1:deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, sha1:ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03' -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
5fed3813f7f5
- multiple fingerprints specified and none match
$ hg --config 'hostfingerprints.localhost=deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, aeadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/ --insecure
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: certificate for localhost has unexpected fingerprint ec:d8:7c:d6:b3:86:d0:4f:c1:b8:b4:1c:9d:8f:5e:16:8e:ef:1c:03
(check hostfingerprint configuration)
[255]
$ hg --config 'hostsecurity.localhost:fingerprints=sha1:deadbeefdeadbeefdeadbeefdeadbeefdeadbeef, sha1:aeadbeefdeadbeefdeadbeefdeadbeefdeadbeef' -R copy-pull id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: certificate for localhost has unexpected fingerprint sha1:ec:d8:7c:d6:b3:86:d0:4f:c1:b8:b4:1c:9d:8f:5e:16:8e:ef:1c:03
(check hostsecurity configuration)
[255]
- fails when cert doesn't match hostname (port is ignored)
$ hg -R copy-pull id https://localhost:$HGPORT1/ --config hostfingerprints.localhost=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: certificate for localhost has unexpected fingerprint f4:2f:5a:0c:3e:52:5b:db:e7:24:a8:32:1d:18:97:6d:69:b5:87:84
(check hostfingerprint configuration)
[255]
- ignores that certificate doesn't match hostname
$ hg -R copy-pull id https://$LOCALIP:$HGPORT/ --config hostfingerprints.$LOCALIP=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03
warning: connecting to $LOCALIP using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(SHA-1 fingerprint for $LOCALIP found in legacy [hostfingerprints] section; if you trust this fingerprint, remove the old SHA-1 fingerprint from [hostfingerprints] and add the following entry to the new [hostsecurity] section: $LOCALIP:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
5fed3813f7f5
Ports used by next test. Kill servers.
$ killdaemons.py hg0.pid
$ killdaemons.py hg1.pid
$ killdaemons.py hg2.pid
#if sslcontext tls1.2
Start servers running supported TLS versions
$ cd test
$ hg serve -p $HGPORT -d --pid-file=../hg0.pid --certificate=$PRIV \
> --config devel.serverexactprotocol=tls1.0
$ cat ../hg0.pid >> $DAEMON_PIDS
$ hg serve -p $HGPORT1 -d --pid-file=../hg1.pid --certificate=$PRIV \
> --config devel.serverexactprotocol=tls1.1
$ cat ../hg1.pid >> $DAEMON_PIDS
$ hg serve -p $HGPORT2 -d --pid-file=../hg2.pid --certificate=$PRIV \
> --config devel.serverexactprotocol=tls1.2
$ cat ../hg2.pid >> $DAEMON_PIDS
$ cd ..
Clients talking same TLS versions work
$ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.0 id https://localhost:$HGPORT/
5fed3813f7f5
$ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.1 id https://localhost:$HGPORT1/
5fed3813f7f5
$ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.2 id https://localhost:$HGPORT2/
5fed3813f7f5
Clients requiring newer TLS version than what server supports fail
$ P="$CERTSDIR" hg id https://localhost:$HGPORT/
(could not negotiate a common security protocol (tls1.1+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
(consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
(see https://mercurial-scm.org/wiki/SecureConnections for more info)
abort: error: *unsupported protocol* (glob)
[255]
$ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.1 id https://localhost:$HGPORT/
(could not negotiate a common security protocol (tls1.1+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
(consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
(see https://mercurial-scm.org/wiki/SecureConnections for more info)
abort: error: *unsupported protocol* (glob)
[255]
$ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.2 id https://localhost:$HGPORT/
(could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
(consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
(see https://mercurial-scm.org/wiki/SecureConnections for more info)
abort: error: *unsupported protocol* (glob)
[255]
$ P="$CERTSDIR" hg --config hostsecurity.minimumprotocol=tls1.2 id https://localhost:$HGPORT1/
(could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
(consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
(see https://mercurial-scm.org/wiki/SecureConnections for more info)
abort: error: *unsupported protocol* (glob)
[255]
--insecure will allow TLS 1.0 connections and override configs
$ hg --config hostsecurity.minimumprotocol=tls1.2 id --insecure https://localhost:$HGPORT1/
warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
5fed3813f7f5
The per-host config option overrides the default
$ P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
> --config hostsecurity.minimumprotocol=tls1.2 \
> --config hostsecurity.localhost:minimumprotocol=tls1.0
5fed3813f7f5
The per-host config option by itself works
$ P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
> --config hostsecurity.localhost:minimumprotocol=tls1.2
(could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
(consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
(see https://mercurial-scm.org/wiki/SecureConnections for more info)
abort: error: *unsupported protocol* (glob)
[255]
.hg/hgrc file [hostsecurity] settings are applied to remote ui instances (issue5305)
$ cat >> copy-pull/.hg/hgrc << EOF
> [hostsecurity]
> localhost:minimumprotocol=tls1.2
> EOF
$ P="$CERTSDIR" hg -R copy-pull id https://localhost:$HGPORT/
(could not negotiate a common security protocol (tls1.2+) with localhost; the likely cause is Mercurial is configured to be more secure than the server can support)
(consider contacting the operator of this server and ask them to support modern TLS protocol versions; or, set hostsecurity.localhost:minimumprotocol=tls1.0 to allow use of legacy, less secure protocols when communicating with this server)
(see https://mercurial-scm.org/wiki/SecureConnections for more info)
abort: error: *unsupported protocol* (glob)
[255]
$ killdaemons.py hg0.pid
$ killdaemons.py hg1.pid
$ killdaemons.py hg2.pid
#endif
Prepare for connecting through proxy
$ hg serve -R test -p $HGPORT -d --pid-file=hg0.pid --certificate=$PRIV
$ cat hg0.pid >> $DAEMON_PIDS
$ hg serve -R test -p $HGPORT2 -d --pid-file=hg2.pid --certificate=server-expired.pem
$ cat hg2.pid >> $DAEMON_PIDS
tinyproxy.py doesn't fully detach, so killing it may result in extra output
from the shell. So don't kill it.
$ tinyproxy.py $HGPORT1 localhost >proxy.log </dev/null 2>&1 &
$ while [ ! -f proxy.pid ]; do sleep 0; done
$ cat proxy.pid >> $DAEMON_PIDS
$ echo "[http_proxy]" >> copy-pull/.hg/hgrc
$ echo "always=True" >> copy-pull/.hg/hgrc
$ echo "[hostfingerprints]" >> copy-pull/.hg/hgrc
$ echo "localhost =" >> copy-pull/.hg/hgrc
Test unvalidated https through proxy
$ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull --insecure
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
warning: connection security to localhost is disabled per current settings; communication is susceptible to eavesdropping and tampering
searching for changes
no changes found
Test https with cacert and fingerprint through proxy
$ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull \
> --config web.cacerts="$CERTSDIR/pub.pem"
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
searching for changes
no changes found
$ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull https://localhost:$HGPORT/ --config hostfingerprints.localhost=ecd87cd6b386d04fc1b8b41c9d8f5e168eef1c03 --trace
pulling from https://*:$HGPORT/ (glob)
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
(SHA-1 fingerprint for localhost found in legacy [hostfingerprints] section; if you trust this fingerprint, remove the old SHA-1 fingerprint from [hostfingerprints] and add the following entry to the new [hostsecurity] section: localhost:fingerprints=sha256:20:de:b3:ad:b4:cd:a5:42:f0:74:41:1c:a2:70:1e:da:6e:c0:5c:16:9e:e7:22:0f:f1:b7:e5:6e:e4:92:af:7e)
searching for changes
no changes found
Test https with cert problems through proxy
$ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull \
> --config web.cacerts="$CERTSDIR/pub-other.pem"
pulling from https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: *certificate verify failed* (glob)
[255]
$ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull \
> --config web.cacerts="$CERTSDIR/pub-expired.pem" https://localhost:$HGPORT2/
pulling from https://localhost:$HGPORT2/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: *certificate verify failed* (glob)
[255]
$ killdaemons.py hg0.pid
#if sslcontext
Start hgweb that requires client certificates:
$ cd test
$ hg serve -p $HGPORT -d --pid-file=../hg0.pid --certificate=$PRIV \
> --config devel.servercafile=$PRIV --config devel.serverrequirecert=true
$ cat ../hg0.pid >> $DAEMON_PIDS
$ cd ..
without client certificate:
$ P="$CERTSDIR" hg id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: *handshake failure* (glob)
[255]
with client certificate:
$ cat << EOT >> $HGRCPATH
> [auth]
> l.prefix = localhost
> l.cert = $CERTSDIR/client-cert.pem
> l.key = $CERTSDIR/client-key.pem
> EOT
$ P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
> --config auth.l.key="$CERTSDIR/client-key-decrypted.pem"
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
5fed3813f7f5
$ printf '1234\n' | env P="$CERTSDIR" hg id https://localhost:$HGPORT/ \
> --config ui.interactive=True --config ui.nontty=True
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
passphrase for */client-key.pem: 5fed3813f7f5 (glob)
$ env P="$CERTSDIR" hg id https://localhost:$HGPORT/
warning: connecting to localhost using legacy security technology (TLS 1.0); see https://mercurial-scm.org/wiki/SecureConnections for more info (?)
abort: error: * (glob)
[255]
#endif