cmdutil: break import cycle
This was the easiest place to break the chain, as there were only
2 uses of the imported module in the file.
# Copyright 2005, 2006 Benoit Boissinot <benoit.boissinot@ens-lyon.org>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''commands to sign and verify changesets'''
import os, tempfile, binascii
from mercurial import util, commands, match, cmdutil
from mercurial import node as hgnode
from mercurial.i18n import _
cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'
class gpg(object):
def __init__(self, path, key=None):
self.path = path
self.key = (key and " --local-user \"%s\"" % key) or ""
def sign(self, data):
gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
return util.filter(data, gpgcmd)
def verify(self, data, sig):
""" returns of the good and bad signatures"""
sigfile = datafile = None
try:
# create temporary files
fd, sigfile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".sig")
fp = os.fdopen(fd, 'wb')
fp.write(sig)
fp.close()
fd, datafile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".txt")
fp = os.fdopen(fd, 'wb')
fp.write(data)
fp.close()
gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
"\"%s\" \"%s\"" % (self.path, sigfile, datafile))
ret = util.filter("", gpgcmd)
finally:
for f in (sigfile, datafile):
try:
if f:
os.unlink(f)
except OSError:
pass
keys = []
key, fingerprint = None, None
for l in ret.splitlines():
# see DETAILS in the gnupg documentation
# filter the logger output
if not l.startswith("[GNUPG:]"):
continue
l = l[9:]
if l.startswith("VALIDSIG"):
# fingerprint of the primary key
fingerprint = l.split()[10]
elif l.startswith("ERRSIG"):
key = l.split(" ", 3)[:2]
key.append("")
fingerprint = None
elif (l.startswith("GOODSIG") or
l.startswith("EXPSIG") or
l.startswith("EXPKEYSIG") or
l.startswith("BADSIG")):
if key is not None:
keys.append(key + [fingerprint])
key = l.split(" ", 2)
fingerprint = None
if key is not None:
keys.append(key + [fingerprint])
return keys
def newgpg(ui, **opts):
"""create a new gpg instance"""
gpgpath = ui.config("gpg", "cmd", "gpg")
gpgkey = opts.get('key')
if not gpgkey:
gpgkey = ui.config("gpg", "key", None)
return gpg(gpgpath, gpgkey)
def sigwalk(repo):
"""
walk over every sigs, yields a couple
((node, version, sig), (filename, linenumber))
"""
def parsefile(fileiter, context):
ln = 1
for l in fileiter:
if not l:
continue
yield (l.split(" ", 2), (context, ln))
ln += 1
# read the heads
fl = repo.file(".hgsigs")
for r in reversed(fl.heads()):
fn = ".hgsigs|%s" % hgnode.short(r)
for item in parsefile(fl.read(r).splitlines(), fn):
yield item
try:
# read local signatures
fn = "localsigs"
for item in parsefile(repo.vfs(fn), fn):
yield item
except IOError:
pass
def getkeys(ui, repo, mygpg, sigdata, context):
"""get the keys who signed a data"""
fn, ln = context
node, version, sig = sigdata
prefix = "%s:%d" % (fn, ln)
node = hgnode.bin(node)
data = node2txt(repo, node, version)
sig = binascii.a2b_base64(sig)
keys = mygpg.verify(data, sig)
validkeys = []
# warn for expired key and/or sigs
for key in keys:
if key[0] == "ERRSIG":
ui.write(_("%s Unknown key ID \"%s\"\n")
% (prefix, shortkey(ui, key[1][:15])))
continue
if key[0] == "BADSIG":
ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
continue
if key[0] == "EXPSIG":
ui.write(_("%s Note: Signature has expired"
" (signed by: \"%s\")\n") % (prefix, key[2]))
elif key[0] == "EXPKEYSIG":
ui.write(_("%s Note: This key has expired"
" (signed by: \"%s\")\n") % (prefix, key[2]))
validkeys.append((key[1], key[2], key[3]))
return validkeys
@command("sigs", [], _('hg sigs'))
def sigs(ui, repo):
"""list signed changesets"""
mygpg = newgpg(ui)
revs = {}
for data, context in sigwalk(repo):
node, version, sig = data
fn, ln = context
try:
n = repo.lookup(node)
except KeyError:
ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
continue
r = repo.changelog.rev(n)
keys = getkeys(ui, repo, mygpg, data, context)
if not keys:
continue
revs.setdefault(r, [])
revs[r].extend(keys)
for rev in sorted(revs, reverse=True):
for k in revs[rev]:
r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
ui.write("%-30s %s\n" % (keystr(ui, k), r))
@command("sigcheck", [], _('hg sigcheck REV'))
def check(ui, repo, rev):
"""verify all the signatures there may be for a particular revision"""
mygpg = newgpg(ui)
rev = repo.lookup(rev)
hexrev = hgnode.hex(rev)
keys = []
for data, context in sigwalk(repo):
node, version, sig = data
if node == hexrev:
k = getkeys(ui, repo, mygpg, data, context)
if k:
keys.extend(k)
if not keys:
ui.write(_("no valid signature for %s\n") % hgnode.short(rev))
return
# print summary
ui.write("%s is signed by:\n" % hgnode.short(rev))
for key in keys:
ui.write(" %s\n" % keystr(ui, key))
def keystr(ui, key):
"""associate a string to a key (username, comment)"""
keyid, user, fingerprint = key
comment = ui.config("gpg", fingerprint, None)
if comment:
return "%s (%s)" % (user, comment)
else:
return user
@command("sign",
[('l', 'local', None, _('make the signature local')),
('f', 'force', None, _('sign even if the sigfile is modified')),
('', 'no-commit', None, _('do not commit the sigfile after signing')),
('k', 'key', '',
_('the key id to sign with'), _('ID')),
('m', 'message', '',
_('use text as commit message'), _('TEXT')),
('e', 'edit', False, _('invoke editor on commit messages')),
] + commands.commitopts2,
_('hg sign [OPTION]... [REV]...'))
def sign(ui, repo, *revs, **opts):
"""add a signature for the current or given revision
If no revision is given, the parent of the working directory is used,
or tip if no revision is checked out.
The ``gpg.cmd`` config setting can be used to specify the command
to run. A default key can be specified with ``gpg.key``.
See :hg:`help dates` for a list of formats valid for -d/--date.
"""
mygpg = newgpg(ui, **opts)
sigver = "0"
sigmessage = ""
date = opts.get('date')
if date:
opts['date'] = util.parsedate(date)
if revs:
nodes = [repo.lookup(n) for n in revs]
else:
nodes = [node for node in repo.dirstate.parents()
if node != hgnode.nullid]
if len(nodes) > 1:
raise util.Abort(_('uncommitted merge - please provide a '
'specific revision'))
if not nodes:
nodes = [repo.changelog.tip()]
for n in nodes:
hexnode = hgnode.hex(n)
ui.write(_("signing %d:%s\n") % (repo.changelog.rev(n),
hgnode.short(n)))
# build data
data = node2txt(repo, n, sigver)
sig = mygpg.sign(data)
if not sig:
raise util.Abort(_("error while signing"))
sig = binascii.b2a_base64(sig)
sig = sig.replace("\n", "")
sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)
# write it
if opts['local']:
repo.vfs.append("localsigs", sigmessage)
return
if not opts["force"]:
msigs = match.exact(repo.root, '', ['.hgsigs'])
if any(repo.status(match=msigs, unknown=True, ignored=True)):
raise util.Abort(_("working copy of .hgsigs is changed "),
hint=_("please commit .hgsigs manually"))
sigsfile = repo.wfile(".hgsigs", "ab")
sigsfile.write(sigmessage)
sigsfile.close()
if '.hgsigs' not in repo.dirstate:
repo[None].add([".hgsigs"])
if opts["no_commit"]:
return
message = opts['message']
if not message:
# we don't translate commit messages
message = "\n".join(["Added signature for changeset %s"
% hgnode.short(n)
for n in nodes])
try:
editor = cmdutil.getcommiteditor(editform='gpg.sign', **opts)
repo.commit(message, opts['user'], opts['date'], match=msigs,
editor=editor)
except ValueError as inst:
raise util.Abort(str(inst))
def shortkey(ui, key):
if len(key) != 16:
ui.debug("key ID \"%s\" format error\n" % key)
return key
return key[-8:]
def node2txt(repo, node, ver):
"""map a manifest into some text"""
if ver == "0":
return "%s\n" % hgnode.hex(node)
else:
raise util.Abort(_("unknown signature version"))