view tests/test-clone.t @ 33056:2312e70cf78b

rebase: clean up rebasestate from active transaction

Previously, rebase assumes the following pattern:

    rebase:
        with transaction as tr: # top-level
            ...
        tr.__close__ writes rebasestate
        unlink('rebasestate')

However it's possible that "rebase" was called inside a transaction:

    with transaction as tr1:
        rebase:
            with transaction as tr2: # not top-level
                ...
            tr2.__close__ does not write rebasestate
            unlink('rebasestate')
    tr1.__close__ writes rebasestate

That leaves a rebasestate on disk incorrectly.

This patch adds "removefilegenerator" to notify transaction code that the
state file is no longer needed therefore fixes the issue.

Prepare repo a:

  $ hg init a
  $ cd a
  $ echo a > a
  $ hg add a
  $ hg commit -m test
  $ echo first line > b
  $ hg add b

Create a non-inlined filelog:

  $ $PYTHON -c 'file("data1", "wb").write("".join("%s\n" % x for x in range(10000)))'
  $ for j in 0 1 2 3 4 5 6 7 8 9; do
  >   cat data1 >> b
  >   hg commit -m test
  > done

List files in store/data (should show a 'b.d'):

  $ for i in .hg/store/data/*; do
  >   echo $i
  > done
  .hg/store/data/a.i
  .hg/store/data/b.d
  .hg/store/data/b.i

Trigger branchcache creation:

  $ hg branches
  default                       10:a7949464abda
  $ ls .hg/cache
  branch2-served
  checkisexec (execbit !)
  checklink (symlink !)
  checklink-target (symlink !)
  checknoexec (execbit !)
  rbc-names-v1
  rbc-revs-v1

Default operation:

  $ hg clone . ../b
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ../b

Ensure branchcache got copied over:

  $ ls .hg/cache
  branch2-served
  checkisexec (execbit !)
  checklink (symlink !)
  checklink-target (symlink !)
  rbc-names-v1
  rbc-revs-v1

  $ cat a
  a
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 11 changesets, 11 total revisions

Invalid dest '' must abort:

  $ hg clone . ''
  abort: empty destination path is not valid
  [255]

No update, with debug option:

#if hardlink
  $ hg --debug clone -U . ../c --config progress.debug=true
  linking: 1
  linking: 2
  linking: 3
  linking: 4
  linking: 5
  linking: 6
  linking: 7
  linking: 8
  linked 8 files
#else
  $ hg --debug clone -U . ../c --config progress.debug=true
  linking: 1
  copying: 2
  copying: 3
  copying: 4
  copying: 5
  copying: 6
  copying: 7
  copying: 8
  copied 8 files
#endif
  $ cd ../c

Ensure branchcache got copied over:

  $ ls .hg/cache
  branch2-served
  rbc-names-v1
  rbc-revs-v1

  $ cat a 2>/dev/null || echo "a not present"
  a not present
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 11 changesets, 11 total revisions

Default destination:

  $ mkdir ../d
  $ cd ../d
  $ hg clone ../a
  destination directory: a
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd a
  $ hg cat a
  a
  $ cd ../..

Check that we drop the 'file:' from the path before writing the .hgrc:

  $ hg clone file:a e
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ grep 'file:' e/.hg/hgrc
  [1]

Check that path aliases are expanded:

  $ hg clone -q -U --config 'paths.foobar=a#0' foobar f
  $ hg -R f showconfig paths.default
  $TESTTMP/a#0 (glob)

Use --pull:

  $ hg clone --pull a g
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 11 changesets with 11 changes to 2 files
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R g verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 11 changesets, 11 total revisions

Invalid dest '' with --pull must abort (issue2528):

  $ hg clone --pull a ''
  abort: empty destination path is not valid
  [255]

Clone to '.':

  $ mkdir h
  $ cd h
  $ hg clone ../a .
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..


*** Tests for option -u ***

Adding some more history to repo a:

  $ cd a
  $ hg tag ref1
  $ echo the quick brown fox >a
  $ hg ci -m "hacked default"
  $ hg up ref1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg branch stable
  marked working directory as branch stable
  (branches are permanent and global, did you want a bookmark?)
  $ echo some text >a
  $ hg ci -m "starting branch stable"
  $ hg tag ref2
  $ echo some more text >a
  $ hg ci -m "another change for branch stable"
  $ hg up ref2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents
  changeset:   13:e8ece76546a6
  branch:      stable
  tag:         ref2
  parent:      10:a7949464abda
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     starting branch stable
  

Repo a has two heads:

  $ hg heads
  changeset:   15:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  

  $ cd ..


Testing --noupdate with --updaterev (must abort):

  $ hg clone --noupdate --updaterev 1 a ua
  abort: cannot specify both --noupdate and --updaterev
  [255]


Testing clone -u:

  $ hg clone -u . a ua
  updating to branch stable
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Repo ua has both heads:

  $ hg -R ua heads
  changeset:   15:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  

Same revision checked out in repo a and ua:

  $ hg -R a parents --template "{node|short}\n"
  e8ece76546a6
  $ hg -R ua parents --template "{node|short}\n"
  e8ece76546a6

  $ rm -r ua


Testing clone --pull -u:

  $ hg clone --pull -u . a ua
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 16 changesets with 16 changes to 3 files (+1 heads)
  updating to branch stable
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Repo ua has both heads:

  $ hg -R ua heads
  changeset:   15:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  

Same revision checked out in repo a and ua:

  $ hg -R a parents --template "{node|short}\n"
  e8ece76546a6
  $ hg -R ua parents --template "{node|short}\n"
  e8ece76546a6

  $ rm -r ua


Testing clone -u <branch>:

  $ hg clone -u stable a ua
  updating to branch stable
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

Repo ua has both heads:

  $ hg -R ua heads
  changeset:   15:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  

Branch 'stable' is checked out:

  $ hg -R ua parents
  changeset:   15:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  

  $ rm -r ua


Testing default checkout:

  $ hg clone a ua
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

Repo ua has both heads:

  $ hg -R ua heads
  changeset:   15:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  

Branch 'default' is checked out:

  $ hg -R ua parents
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  
Test clone with a branch named "@" (issue3677)

  $ hg -R ua branch @
  marked working directory as branch @
  $ hg -R ua commit -m 'created branch @'
  $ hg clone ua atbranch
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R atbranch heads
  changeset:   16:798b6d97153e
  branch:      @
  tag:         tip
  parent:      12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     created branch @
  
  changeset:   15:0aae7cf88f0d
  branch:      stable
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  
  $ hg -R atbranch parents
  changeset:   12:f21241060d6a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     hacked default
  

  $ rm -r ua atbranch


Testing #<branch>:

  $ hg clone -u . a#stable ua
  adding changesets
  adding manifests
  adding file changes
  added 14 changesets with 14 changes to 3 files
  updating to branch stable
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Repo ua has branch 'stable' and 'default' (was changed in fd511e9eeea6):

  $ hg -R ua heads
  changeset:   13:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   10:a7949464abda
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     test
  

Same revision checked out in repo a and ua:

  $ hg -R a parents --template "{node|short}\n"
  e8ece76546a6
  $ hg -R ua parents --template "{node|short}\n"
  e8ece76546a6

  $ rm -r ua


Testing -u -r <branch>:

  $ hg clone -u . -r stable a ua
  adding changesets
  adding manifests
  adding file changes
  added 14 changesets with 14 changes to 3 files
  updating to branch stable
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Repo ua has branch 'stable' and 'default' (was changed in fd511e9eeea6):

  $ hg -R ua heads
  changeset:   13:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   10:a7949464abda
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     test
  

Same revision checked out in repo a and ua:

  $ hg -R a parents --template "{node|short}\n"
  e8ece76546a6
  $ hg -R ua parents --template "{node|short}\n"
  e8ece76546a6

  $ rm -r ua


Testing -r <branch>:

  $ hg clone -r stable a ua
  adding changesets
  adding manifests
  adding file changes
  added 14 changesets with 14 changes to 3 files
  updating to branch stable
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

Repo ua has branch 'stable' and 'default' (was changed in fd511e9eeea6):

  $ hg -R ua heads
  changeset:   13:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  
  changeset:   10:a7949464abda
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     test
  

Branch 'stable' is checked out:

  $ hg -R ua parents
  changeset:   13:0aae7cf88f0d
  branch:      stable
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     another change for branch stable
  

  $ rm -r ua


Issue2267: Error in 1.6 hg.py: TypeError: 'NoneType' object is not
iterable in addbranchrevs()

  $ cat <<EOF > simpleclone.py
  > from mercurial import ui, hg
  > myui = ui.ui.load()
  > repo = hg.repository(myui, 'a')
  > hg.clone(myui, {}, repo, dest="ua")
  > EOF

  $ $PYTHON simpleclone.py
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ rm -r ua

  $ cat <<EOF > branchclone.py
  > from mercurial import ui, hg, extensions
  > myui = ui.ui.load()
  > extensions.loadall(myui)
  > repo = hg.repository(myui, 'a')
  > hg.clone(myui, {}, repo, dest="ua", branch=["stable",])
  > EOF

  $ $PYTHON branchclone.py
  adding changesets
  adding manifests
  adding file changes
  added 14 changesets with 14 changes to 3 files
  updating to branch stable
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -r ua


Test clone with special '@' bookmark:
  $ cd a
  $ hg bookmark -r a7949464abda @  # branch point of stable from default
  $ hg clone . ../i
  updating to bookmark @
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg id -i ../i
  a7949464abda
  $ rm -r ../i

  $ hg bookmark -f -r stable @
  $ hg bookmarks
     @                         15:0aae7cf88f0d
  $ hg clone . ../i
  updating to bookmark @ on branch stable
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg id -i ../i
  0aae7cf88f0d
  $ cd "$TESTTMP"


Testing failures:

  $ mkdir fail
  $ cd fail

No local source

  $ hg clone a b
  abort: repository a not found!
  [255]

No remote source

#if windows
  $ hg clone http://$LOCALIP:3121/a b
  abort: error: * (glob)
  [255]
#else
  $ hg clone http://$LOCALIP:3121/a b
  abort: error: *refused* (glob)
  [255]
#endif
  $ rm -rf b # work around bug with http clone


#if unix-permissions no-root

Inaccessible source

  $ mkdir a
  $ chmod 000 a
  $ hg clone a b
  abort: repository a not found!
  [255]

Inaccessible destination

  $ hg init b
  $ cd b
  $ hg clone . ../a
  abort: Permission denied: '../a'
  [255]
  $ cd ..
  $ chmod 700 a
  $ rm -r a b

#endif


#if fifo

Source of wrong type

  $ mkfifo a
  $ hg clone a b
  abort: repository a not found!
  [255]
  $ rm a

#endif

Default destination, same directory

  $ hg init q
  $ hg clone q
  destination directory: q
  abort: destination 'q' is not empty
  [255]

destination directory not empty

  $ mkdir a
  $ echo stuff > a/a
  $ hg clone q a
  abort: destination 'a' is not empty
  [255]


#if unix-permissions no-root

leave existing directory in place after clone failure

  $ hg init c
  $ cd c
  $ echo c > c
  $ hg commit -A -m test
  adding c
  $ chmod -rx .hg/store/data
  $ cd ..
  $ mkdir d
  $ hg clone c d 2> err
  [255]
  $ test -d d
  $ test -d d/.hg
  [1]

re-enable perm to allow deletion

  $ chmod +rx c/.hg/store/data

#endif

  $ cd ..

Test clone from the repository in (emulated) revlog format 0 (issue4203):

  $ mkdir issue4203
  $ mkdir -p src/.hg
  $ echo foo > src/foo
  $ hg -R src add src/foo
  $ hg -R src commit -m '#0'
  $ hg -R src log -q
  0:e1bab28bca43
  $ hg clone -U -q src dst
  $ hg -R dst log -q
  0:e1bab28bca43

Create repositories to test auto sharing functionality

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > share=
  > EOF

  $ hg init empty
  $ hg init source1a
  $ cd source1a
  $ echo initial1 > foo
  $ hg -q commit -A -m initial
  $ echo second > foo
  $ hg commit -m second
  $ cd ..

  $ hg init filteredrev0
  $ cd filteredrev0
  $ cat >> .hg/hgrc << EOF
  > [experimental]
  > evolution=createmarkers
  > EOF
  $ echo initial1 > foo
  $ hg -q commit -A -m initial0
  $ hg -q up -r null
  $ echo initial2 > foo
  $ hg -q commit -A -m initial1
  $ hg debugobsolete c05d5c47a5cf81401869999f3d05f7d699d2b29a e082c1832e09a7d1e78b7fd49a592d372de854c8
  $ cd ..

  $ hg -q clone --pull source1a source1b
  $ cd source1a
  $ hg bookmark bookA
  $ echo 1a > foo
  $ hg commit -m 1a
  $ cd ../source1b
  $ hg -q up -r 0
  $ echo head1 > foo
  $ hg commit -m head1
  created new head
  $ hg bookmark head1
  $ hg -q up -r 0
  $ echo head2 > foo
  $ hg commit -m head2
  created new head
  $ hg bookmark head2
  $ hg -q up -r 0
  $ hg branch branch1
  marked working directory as branch branch1
  (branches are permanent and global, did you want a bookmark?)
  $ echo branch1 > foo
  $ hg commit -m branch1
  $ hg -q up -r 0
  $ hg branch branch2
  marked working directory as branch branch2
  $ echo branch2 > foo
  $ hg commit -m branch2
  $ cd ..
  $ hg init source2
  $ cd source2
  $ echo initial2 > foo
  $ hg -q commit -A -m initial2
  $ echo second > foo
  $ hg commit -m second
  $ cd ..

Clone with auto share from an empty repo should not result in share

  $ mkdir share
  $ hg --config share.pool=share clone empty share-empty
  (not using pooled storage: remote appears to be empty)
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ ls share
  $ test -d share-empty/.hg/store
  $ test -f share-empty/.hg/sharedpath
  [1]

Clone with auto share from a repo with filtered revision 0 should not result in share

  $ hg --config share.pool=share clone filteredrev0 share-filtered
  (not using pooled storage: unable to resolve identity of remote)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Clone from repo with content should result in shared store being created

  $ hg --config share.pool=share clone source1a share-dest1a
  (sharing from new pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  searching for changes
  no changes found
  adding remote bookmark bookA
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

The shared repo should have been created

  $ ls share
  b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1

The destination should point to it

  $ cat share-dest1a/.hg/sharedpath; echo
  $TESTTMP/share/b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1/.hg (glob)

The destination should have bookmarks

  $ hg -R share-dest1a bookmarks
     bookA                     2:e5bfe23c0b47

The default path should be the remote, not the share

  $ hg -R share-dest1a config paths.default
  $TESTTMP/source1a (glob)

Clone with existing share dir should result in pull + share

  $ hg --config share.pool=share clone source1b share-dest1b
  (sharing from existing pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files (+4 heads)
  adding remote bookmark head1
  adding remote bookmark head2
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls share
  b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1

  $ cat share-dest1b/.hg/sharedpath; echo
  $TESTTMP/share/b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1/.hg (glob)

We only get bookmarks from the remote, not everything in the share

  $ hg -R share-dest1b bookmarks
     head1                     3:4a8dc1ab4c13
     head2                     4:99f71071f117

Default path should be source, not share.

  $ hg -R share-dest1b config paths.default
  $TESTTMP/source1b (glob)

Checked out revision should be head of default branch

  $ hg -R share-dest1b log -r .
  changeset:   4:99f71071f117
  bookmark:    head2
  parent:      0:b5f04eac9d8f
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     head2
  

Clone from unrelated repo should result in new share

  $ hg --config share.pool=share clone source2 share-dest2
  (sharing from new pooled repository 22aeff664783fd44c6d9b435618173c118c3448e)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  searching for changes
  no changes found
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls share
  22aeff664783fd44c6d9b435618173c118c3448e
  b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1

remote naming mode works as advertised

  $ hg --config share.pool=shareremote --config share.poolnaming=remote clone source1a share-remote1a
  (sharing from new pooled repository 195bb1fcdb595c14a6c13e0269129ed78f6debde)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  searching for changes
  no changes found
  adding remote bookmark bookA
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls shareremote
  195bb1fcdb595c14a6c13e0269129ed78f6debde

  $ hg --config share.pool=shareremote --config share.poolnaming=remote clone source1b share-remote1b
  (sharing from new pooled repository c0d4f83847ca2a873741feb7048a45085fd47c46)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 6 changes to 1 files (+4 heads)
  searching for changes
  no changes found
  adding remote bookmark head1
  adding remote bookmark head2
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls shareremote
  195bb1fcdb595c14a6c13e0269129ed78f6debde
  c0d4f83847ca2a873741feb7048a45085fd47c46

request to clone a single revision is respected in sharing mode

  $ hg --config share.pool=sharerevs clone -r 4a8dc1ab4c13 source1b share-1arev
  (sharing from new pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  no changes found
  adding remote bookmark head1
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R share-1arev log -G
  @  changeset:   1:4a8dc1ab4c13
  |  bookmark:    head1
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     head1
  |
  o  changeset:   0:b5f04eac9d8f
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     initial
  

making another clone should only pull down requested rev

  $ hg --config share.pool=sharerevs clone -r 99f71071f117 source1b share-1brev
  (sharing from existing pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  adding remote bookmark head1
  adding remote bookmark head2
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R share-1brev log -G
  @  changeset:   2:99f71071f117
  |  bookmark:    head2
  |  tag:         tip
  |  parent:      0:b5f04eac9d8f
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     head2
  |
  | o  changeset:   1:4a8dc1ab4c13
  |/   bookmark:    head1
  |    user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     head1
  |
  o  changeset:   0:b5f04eac9d8f
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     initial
  

Request to clone a single branch is respected in sharing mode

  $ hg --config share.pool=sharebranch clone -b branch1 source1b share-1bbranch1
  (sharing from new pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  no changes found
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R share-1bbranch1 log -G
  o  changeset:   1:5f92a6c1a1b1
  |  branch:      branch1
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     branch1
  |
  @  changeset:   0:b5f04eac9d8f
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     initial
  

  $ hg --config share.pool=sharebranch clone -b branch2 source1b share-1bbranch2
  (sharing from existing pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R share-1bbranch2 log -G
  o  changeset:   2:6bacf4683960
  |  branch:      branch2
  |  tag:         tip
  |  parent:      0:b5f04eac9d8f
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     branch2
  |
  | o  changeset:   1:5f92a6c1a1b1
  |/   branch:      branch1
  |    user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     branch1
  |
  @  changeset:   0:b5f04eac9d8f
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     initial
  

-U is respected in share clone mode

  $ hg --config share.pool=share clone -U source1a share-1anowc
  (sharing from existing pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  searching for changes
  no changes found
  adding remote bookmark bookA

  $ ls share-1anowc

Test that auto sharing doesn't cause failure of "hg clone local remote"

  $ cd $TESTTMP
  $ hg -R a id -r 0
  acb14030fe0a
  $ hg id -R remote -r 0
  abort: repository remote not found!
  [255]
  $ hg --config share.pool=share -q clone -e "python \"$TESTDIR/dummyssh\"" a ssh://user@dummy/remote
  $ hg -R remote id -r 0
  acb14030fe0a

Cloning into pooled storage doesn't race (issue5104)

  $ HGPOSTLOCKDELAY=2.0 hg --config share.pool=racepool --config extensions.lockdelay=$TESTDIR/lockdelay.py clone source1a share-destrace1 > race1.log 2>&1 &
  $ HGPRELOCKDELAY=1.0 hg --config share.pool=racepool --config extensions.lockdelay=$TESTDIR/lockdelay.py clone source1a share-destrace2  > race2.log 2>&1
  $ wait

  $ hg -R share-destrace1 log -r tip
  changeset:   2:e5bfe23c0b47
  bookmark:    bookA
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1a
  

  $ hg -R share-destrace2 log -r tip
  changeset:   2:e5bfe23c0b47
  bookmark:    bookA
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1a
  
One repo should be new, the other should be shared from the pool. We
don't care which is which, so we just make sure we always print the
one containing "new pooled" first, then one one containing "existing
pooled".

  $ (grep 'new pooled' race1.log > /dev/null && cat race1.log || cat race2.log) | grep -v lock
  (sharing from new pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  searching for changes
  no changes found
  adding remote bookmark bookA
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ (grep 'existing pooled' race1.log > /dev/null && cat race1.log || cat race2.log) | grep -v lock
  (sharing from existing pooled repository b5f04eac9d8f7a6a9fcb070243cccea7dc5ea0c1)
  searching for changes
  no changes found
  adding remote bookmark bookA
  updating working directory
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved