Mercurial > hg
view mercurial/dagparser.py @ 24779:23727465ff72
record: add message when starting record's curses interface
We are adding this log message to reduce a confusion when a command prints
something just before starting the curses interface.
Since the interactive mode is taking over the entire screen, starts with no
delay and does wait for a key press, the user believes that messages printed
before opening the interactive mode were actually printed after using
interactive mode, not before.
The fix adds the line "Starting interactive mode" helping the user separate
the messages that were printed before and after the start of the
interactive mode.
One particular example where this was a problem is the revert command where we
first print the list of changes to be considered for revert, then opens the
curses interface right away without letting the user see the messages.
The user then selects the changes, validates and then see the messages from
before opening the interactive mode and is confused.
author | Laurent Charignon <lcharignon@fb.com> |
---|---|
date | Thu, 16 Apr 2015 14:26:50 -0700 |
parents | 8ac8db8dc346 |
children | c69f4f7fe01a |
line wrap: on
line source
# dagparser.py - parser and generator for concise description of DAGs # # Copyright 2010 Peter Arrenbrecht <peter@arrenbrecht.ch> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. import re, string import util from i18n import _ def parsedag(desc): '''parses a DAG from a concise textual description; generates events "+n" is a linear run of n nodes based on the current default parent "." is a single node based on the current default parent "$" resets the default parent to -1 (implied at the start); otherwise the default parent is always the last node created "<p" sets the default parent to the backref p "*p" is a fork at parent p, where p is a backref "*p1/p2/.../pn" is a merge of parents p1..pn, where the pi are backrefs "/p2/.../pn" is a merge of the preceding node and p2..pn ":name" defines a label for the preceding node; labels can be redefined "@text" emits an annotation event for text "!command" emits an action event for the current node "!!my command\n" is like "!", but to the end of the line "#...\n" is a comment up to the end of the line Whitespace between the above elements is ignored. A backref is either * a number n, which references the node curr-n, where curr is the current node, or * the name of a label you placed earlier using ":name", or * empty to denote the default parent. All string valued-elements are either strictly alphanumeric, or must be enclosed in double quotes ("..."), with "\" as escape character. Generates sequence of ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', command) for actions (!) ('C', command) for line actions (!!) Examples -------- Example of a complex graph (output not shown for brevity): >>> len(list(parsedag(""" ... ... +3 # 3 nodes in linear run ... :forkhere # a label for the last of the 3 nodes from above ... +5 # 5 more nodes on one branch ... :mergethis # label again ... <forkhere # set default parent to labeled fork node ... +10 # 10 more nodes on a parallel branch ... @stable # following nodes will be annotated as "stable" ... +5 # 5 nodes in stable ... !addfile # custom command; could trigger new file in next node ... +2 # two more nodes ... /mergethis # merge last node with labeled node ... +4 # 4 more nodes descending from merge node ... ... """))) 34 Empty list: >>> list(parsedag("")) [] A simple linear run: >>> list(parsedag("+3")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] Some non-standard ways to define such runs: >>> list(parsedag("+1+2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag("+1*1*")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag("*")) [('n', (0, [-1]))] >>> list(parsedag("...")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] A fork and a join, using numeric back references: >>> list(parsedag("+2*2*/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag("+2<2+1/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] Placing a label: >>> list(parsedag("+1 :mylabel +1")) [('n', (0, [-1])), ('l', (0, 'mylabel')), ('n', (1, [0]))] An empty label (silly, really): >>> list(parsedag("+1:+1")) [('n', (0, [-1])), ('l', (0, '')), ('n', (1, [0]))] Fork and join, but with labels instead of numeric back references: >>> list(parsedag("+1:f +1:p2 *f */p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag("+1:f +1:p2 <f +1 /p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] Restarting from the root: >>> list(parsedag("+1 $ +1")) [('n', (0, [-1])), ('n', (1, [-1]))] Annotations, which are meant to introduce sticky state for subsequent nodes: >>> list(parsedag("+1 @ann +1")) [('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))] >>> list(parsedag('+1 @"my annotation" +1')) [('n', (0, [-1])), ('a', 'my annotation'), ('n', (1, [0]))] Commands, which are meant to operate on the most recently created node: >>> list(parsedag("+1 !cmd +1")) [('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))] >>> list(parsedag('+1 !"my command" +1')) [('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))] >>> list(parsedag('+1 !!my command line\\n +1')) [('n', (0, [-1])), ('C', 'my command line'), ('n', (1, [0]))] Comments, which extend to the end of the line: >>> list(parsedag('+1 # comment\\n+1')) [('n', (0, [-1])), ('n', (1, [0]))] Error: >>> try: list(parsedag('+1 bad')) ... except Exception, e: print e invalid character in dag description: bad... ''' if not desc: return wordchars = string.ascii_letters + string.digits labels = {} p1 = -1 r = 0 def resolve(ref): if not ref: return p1 elif ref[0] in string.digits: return r - int(ref) else: return labels[ref] chiter = (c for c in desc) def nextch(): try: return chiter.next() except StopIteration: return '\0' def nextrun(c, allow): s = '' while c in allow: s += c c = nextch() return c, s def nextdelimited(c, limit, escape): s = '' while c != limit: if c == escape: c = nextch() s += c c = nextch() return nextch(), s def nextstring(c): if c == '"': return nextdelimited(nextch(), '"', '\\') else: return nextrun(c, wordchars) c = nextch() while c != '\0': while c in string.whitespace: c = nextch() if c == '.': yield 'n', (r, [p1]) p1 = r r += 1 c = nextch() elif c == '+': c, digs = nextrun(nextch(), string.digits) n = int(digs) for i in xrange(0, n): yield 'n', (r, [p1]) p1 = r r += 1 elif c in '*/': if c == '*': c = nextch() c, pref = nextstring(c) prefs = [pref] while c == '/': c, pref = nextstring(nextch()) prefs.append(pref) ps = [resolve(ref) for ref in prefs] yield 'n', (r, ps) p1 = r r += 1 elif c == '<': c, ref = nextstring(nextch()) p1 = resolve(ref) elif c == ':': c, name = nextstring(nextch()) labels[name] = p1 yield 'l', (p1, name) elif c == '@': c, text = nextstring(nextch()) yield 'a', text elif c == '!': c = nextch() if c == '!': cmd = '' c = nextch() while c not in '\n\r\0': cmd += c c = nextch() yield 'C', cmd else: c, cmd = nextstring(c) yield 'c', cmd elif c == '#': while c not in '\n\r\0': c = nextch() elif c == '$': p1 = -1 c = nextch() elif c == '\0': return # in case it was preceded by whitespace else: s = '' i = 0 while c != '\0' and i < 10: s += c i += 1 c = nextch() raise util.Abort(_('invalid character in dag description: ' '%s...') % s) def dagtextlines(events, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates single lines for dagtext()''' def wrapstring(text): if re.match("^[0-9a-z]*$", text): return text return '"' + text.replace('\\', '\\\\').replace('"', '\"') + '"' def gen(): labels = {} run = 0 wantr = 0 needroot = False for kind, data in events: if kind == 'n': r, ps = data # sanity check if r != wantr: raise util.Abort(_("expected id %i, got %i") % (wantr, r)) if not ps: ps = [-1] else: for p in ps: if p >= r: raise util.Abort(_("parent id %i is larger than " "current id %i") % (p, r)) wantr += 1 # new root? p1 = r - 1 if len(ps) == 1 and ps[0] == -1: if needroot: if run: yield '+' + str(run) run = 0 if wrapnonlinear: yield '\n' yield '$' p1 = -1 else: needroot = True if len(ps) == 1 and ps[0] == p1: if usedots: yield "." else: run += 1 else: if run: yield '+' + str(run) run = 0 if wrapnonlinear: yield '\n' prefs = [] for p in ps: if p == p1: prefs.append('') elif p in labels: prefs.append(labels[p]) else: prefs.append(str(r - p)) yield '*' + '/'.join(prefs) else: if run: yield '+' + str(run) run = 0 if kind == 'l': rid, name = data labels[rid] = name yield ':' + name if wraplabels: yield '\n' elif kind == 'c': yield '!' + wrapstring(data) if wrapcommands: yield '\n' elif kind == 'C': yield '!!' + data yield '\n' elif kind == 'a': if wrapannotations: yield '\n' yield '@' + wrapstring(data) elif kind == '#': yield '#' + data yield '\n' else: raise util.Abort(_("invalid event type in dag: %s") % str((type, data))) if run: yield '+' + str(run) line = '' for part in gen(): if part == '\n': if line: yield line line = '' else: if len(line) + len(part) >= maxlinewidth: yield line line = '' elif addspaces and line and part != '.': line += ' ' line += part if line: yield line def dagtext(dag, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates lines of a textual representation for a dag event stream events should generate what parsedag() does, so: ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', text) for commands ('C', text) for line commands ('!!') ('#', text) for comment lines Parent nodes must come before child nodes. Examples -------- Linear run: >>> dagtext([('n', (0, [-1])), ('n', (1, [0]))]) '+2' Two roots: >>> dagtext([('n', (0, [-1])), ('n', (1, [-1]))]) '+1 $ +1' Fork and join: >>> dagtext([('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ... ('n', (3, [2, 1]))]) '+2 *2 */2' Fork and join with labels: >>> dagtext([('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ... ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))]) '+1 :f +1 :p2 *f */p2' Annotations: >>> dagtext([('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))]) '+1 @ann +1' >>> dagtext([('n', (0, [-1])), ... ('a', 'my annotation'), ... ('n', (1, [0]))]) '+1 @"my annotation" +1' Commands: >>> dagtext([('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))]) '+1 !cmd +1' >>> dagtext([('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))]) '+1 !"my command" +1' >>> dagtext([('n', (0, [-1])), ... ('C', 'my command line'), ... ('n', (1, [0]))]) '+1 !!my command line\\n+1' Comments: >>> dagtext([('n', (0, [-1])), ('#', ' comment'), ('n', (1, [0]))]) '+1 # comment\\n+1' >>> dagtext([]) '' Combining parsedag and dagtext: >>> dagtext(parsedag('+1 :f +1 :p2 *f */p2')) '+1 :f +1 :p2 *f */p2' ''' return "\n".join(dagtextlines(dag, addspaces, wraplabels, wrapannotations, wrapcommands, wrapnonlinear, usedots, maxlinewidth))