view hgext/fetch.py @ 22196:23fe278bde43

largefiles: keep largefiles from colliding with normal one during linear merge

Before this patch, linear merging of modified or newly added largefile
causes unexpected result, if (1) largefile collides with same name
normal one in the target revision and (2) "local" largefile is chosen,
even though branch merging between such revisions doesn't.

Expected result of such linear merging is:

  (1) (not yet recorded) largefile is kept in the working directory
  (2) largefile is marked as (re-)"added"
  (3) colliding normal file is marked as "removed"

But actual result is:

  (1) largefile in the working directory is unlinked
  (2) largefile is marked as "normal" (so treated as "missing")
  (3) the dirstate entry for colliding normal file is just dropped

(1) is very serious, because there is no way to restore temporarily
modified largefiles.

(3) prevents the next commit from adding the manifest with correct
"removal of (normal) file" information for newly created changeset.

The root cause of this problem is putting "lfile" into "actions['r']"
in linear-merging case. At liner merging, "actions['r']" causes:

  - unlinking "target file" in the working directory, but "lfile" as
    "target file" is also largefile itself in this case

  - dropping the dirstate entry for target file

"actions['f']" (= "forget") does only the latter, and this is reason
why this patch doesn't choose putting "lfile" into it instead of
"actions['r']".

This patch newly introduces action "lfmr" (LargeFiles: Mark as
Removed) to mark colliding normal file as "removed" without unlinking
it.

This patch uses "hg debugdirstate" instead of "hg status" in test,
because:

  - choosing "local largefile" hides "removed" status of "remote
    normal file" in "hg status" output, and

  - "hg status" for "large2" in this case has another problem fixed in
    the subsequent patch

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from mercurial.i18n import _
from mercurial.node import nullid, short
from mercurial import commands, cmdutil, hg, util, error
from mercurial.lock import release

cmdtable = {}
command = cmdutil.command(cmdtable)
testedwith = 'internal'

@command('fetch',
    [('r', 'rev', [],
     _('a specific revision you would like to pull'), _('REV')),
    ('e', 'edit', None, _('invoke editor on commit messages')),
    ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
    ('', 'switch-parent', None, _('switch parents when merging')),
    ] + commands.commitopts + commands.commitopts2 + commands.remoteopts,
    _('hg fetch [SOURCE]'))
def fetch(ui, repo, source='default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    parent, p2 = repo.dirstate.parents()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise util.Abort(_('working dir not at branch tip '
                           '(use "hg update" to check out branch tip)'))

    if p2 != nullid:
        raise util.Abort(_('outstanding uncommitted merge'))

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()
        mod, add, rem, del_ = repo.status()[:4]

        if mod or add or rem:
            raise util.Abort(_('outstanding uncommitted changes'))
        if del_:
            raise util.Abort(_('working directory is missing some files'))
        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise util.Abort(_('multiple heads in this branch '
                               '(use "hg heads ." and "hg merge" to merge)'))

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(_('pulling from %s\n') %
                  util.hidepassword(ui.expandpath(source)))
        revs = None
        if opts['rev']:
            try:
                revs = [other.lookup(rev) for rev in opts['rev']]
            except error.CapabilityError:
                err = _("other repository doesn't support revision lookup, "
                        "so a rev cannot be specified.")
                raise util.Abort(err)

        # Are there any changes at all?
        modheads = repo.pull(other, heads=revs)
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(_('not merging with %d other new branch heads '
                        '(use "hg heads ." and "hg merge" to merge them)\n') %
                      (len(newheads) - 1))
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts['switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(_('updating to %d:%s\n') %
                          (repo.changelog.rev(firstparent),
                           short(firstparent)))
            hg.clean(repo, firstparent)
            ui.status(_('merging with %d:%s\n') %
                      (repo.changelog.rev(secondparent), short(secondparent)))
            err = hg.merge(repo, secondparent, remind=False)

        if not err:
            # we don't translate commit messages
            message = (cmdutil.logmessage(ui, opts) or
                       ('Automated merge with %s' %
                        util.removeauth(other.url())))
            editopt = opts.get('edit') or opts.get('force_editor')
            editor = cmdutil.getcommiteditor(edit=editopt, editform='fetch')
            n = repo.commit(message, opts['user'], opts['date'], editor=editor)
            ui.status(_('new changeset %d:%s merges remote changes '
                        'with local\n') % (repo.changelog.rev(n),
                                           short(n)))

        return err

    finally:
        release(lock, wlock)