serve: add support for Mercurial subrepositories
I've been using `hg serve --web-conf ...` with a simple '/=projects/**' [paths]
configuration for awhile without issue. Let's ditch the need for the manual
configuration in this case, and limit the repos served to the actual subrepos.
This doesn't attempt to handle the case where a new subrepo appears while the
server is running. That could probably be handled with a hook if somebody wants
it. But it's such a rare case, it probably doesn't matter for the temporary
serves.
The main repo is served at '/', just like a repository without subrepos. I'm
not sure why the duplicate 'adding ...' lines appear on Linux. They don't
appear on Windows (see
594dd384803c), so they are optional.
Subrepositories that are configured with '../path' or absolute paths are not
cloneable from the server. (They aren't cloneable locally either, unless they
also exist at their configured source, perhaps via the share extension.) They
are still served, so that they can be browsed, or cloned individually. If we
care about that cloning someday, we can probably just add the extra entries to
the webconf dictionary. Even if the entries use '../' to escape the root, only
the related subrepositories would end up in the dictionary.
============================================
Testing obsolescence markers push: Cases B.2
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category B: pruning case
TestCase 2: Prune on targeted common changeset
Variants:
# a: explicite push
# b: bare push
B.2 Pruned changeset on head: nothing pushed
============================================
.. {{{
.. ⊗ A
.. |
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * A (prune)
..
.. Command run:
..
.. * hg push -r O
.. * hg push
..
.. Expected exchange:
..
.. * prune marker for A
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
Initial
$ setuprepos B.2
creating test repo for test case B.2
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ hg prune -qd '0 0' .
$ hg log -G --hidden
x f5bc6836db60 (draft): A
|
@ a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
$ cp -R B.2 B.2.a
$ cp -R B.2 B.2.b
Actual Test (explicit push version)
-----------------------------------
$ dotest B.2.a O
## Running testcase B.2.a
# testing echange of "O" (a9bdc8b26820)
## initial state
# obstore: main
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "O" from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "a9bdc8b26820" from main into pulldest
pulling from main
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Actual Test (bare push version)
-----------------------------------
$ dotest B.2.b
## Running testcase B.2.b
## initial state
# obstore: main
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}