view hgext/blackbox.py @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

# blackbox.py - log repository events to a file for post-mortem debugging
#
# Copyright 2010 Nicolas Dumazet
# Copyright 2013 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""log repository events to a blackbox for debugging

Logs event information to .hg/blackbox.log to help debug and diagnose problems.
The events that get logged can be configured via the blackbox.track config key.

Examples::

  [blackbox]
  track = *
  # dirty is *EXPENSIVE* (slow);
  # each log entry indicates `+` if the repository is dirty, like :hg:`id`.
  dirty = True
  # record the source of log messages
  logsource = True

  [blackbox]
  track = command, commandfinish, commandexception, exthook, pythonhook

  [blackbox]
  track = incoming

  [blackbox]
  # limit the size of a log file
  maxsize = 1.5 MB
  # rotate up to N log files when the current one gets too big
  maxfiles = 3

"""

from __future__ import absolute_import

import errno
import re

from mercurial.i18n import _
from mercurial.node import hex

from mercurial import (
    registrar,
    ui as uimod,
    util,
)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

cmdtable = {}
command = registrar.command(cmdtable)

configtable = {}
configitem = registrar.configitem(configtable)

configitem('blackbox', 'dirty',
    default=False,
)
configitem('blackbox', 'maxsize',
    default='1 MB',
)
configitem('blackbox', 'logsource',
    default=False,
)
configitem('blackbox', 'maxfiles',
    default=7,
)
configitem('blackbox', 'track',
    default=lambda: ['*'],
)

lastui = None

def _openlogfile(ui, vfs):
    def rotate(oldpath, newpath):
        try:
            vfs.unlink(newpath)
        except OSError as err:
            if err.errno != errno.ENOENT:
                ui.debug("warning: cannot remove '%s': %s\n" %
                         (newpath, err.strerror))
        try:
            if newpath:
                vfs.rename(oldpath, newpath)
        except OSError as err:
            if err.errno != errno.ENOENT:
                ui.debug("warning: cannot rename '%s' to '%s': %s\n" %
                         (newpath, oldpath, err.strerror))

    maxsize = ui.configbytes('blackbox', 'maxsize')
    name = 'blackbox.log'
    if maxsize > 0:
        try:
            st = vfs.stat(name)
        except OSError:
            pass
        else:
            if st.st_size >= maxsize:
                path = vfs.join(name)
                maxfiles = ui.configint('blackbox', 'maxfiles')
                for i in xrange(maxfiles - 1, 1, -1):
                    rotate(oldpath='%s.%d' % (path, i - 1),
                           newpath='%s.%d' % (path, i))
                rotate(oldpath=path,
                       newpath=maxfiles > 0 and path + '.1')
    return vfs(name, 'a')

def wrapui(ui):
    class blackboxui(ui.__class__):
        @property
        def _bbvfs(self):
            vfs = None
            repo = getattr(self, '_bbrepo', None)
            if repo:
                vfs = repo.vfs
                if not vfs.isdir('.'):
                    vfs = None
            return vfs

        @util.propertycache
        def track(self):
            return self.configlist('blackbox', 'track')

        def log(self, event, *msg, **opts):
            global lastui
            super(blackboxui, self).log(event, *msg, **opts)

            if not '*' in self.track and not event in self.track:
                return

            if self._bbvfs:
                ui = self
            else:
                # certain ui instances exist outside the context of
                # a repo, so just default to the last blackbox that
                # was seen.
                ui = lastui

            if not ui:
                return
            vfs = ui._bbvfs
            if not vfs:
                return

            repo = getattr(ui, '_bbrepo', None)
            if not lastui or repo:
                lastui = ui
            if getattr(ui, '_bbinlog', False):
                # recursion and failure guard
                return
            ui._bbinlog = True
            default = self.configdate('devel', 'default-date')
            date = util.datestr(default, '%Y/%m/%d %H:%M:%S')
            user = util.getuser()
            pid = '%d' % util.getpid()
            formattedmsg = msg[0] % msg[1:]
            rev = '(unknown)'
            changed = ''
            if repo:
                ctx = repo[None]
                parents = ctx.parents()
                rev = ('+'.join([hex(p.node()) for p in parents]))
                if (ui.configbool('blackbox', 'dirty') and
                    ctx.dirty(missing=True, merge=False, branch=False)):
                    changed = '+'
            if ui.configbool('blackbox', 'logsource'):
                src = ' [%s]' % event
            else:
                src = ''
            try:
                fmt = '%s %s @%s%s (%s)%s> %s'
                args = (date, user, rev, changed, pid, src, formattedmsg)
                with _openlogfile(ui, vfs) as fp:
                    fp.write(fmt % args)
            except (IOError, OSError) as err:
                self.debug('warning: cannot write to blackbox.log: %s\n' %
                           err.strerror)
                # do not restore _bbinlog intentionally to avoid failed
                # logging again
            else:
                ui._bbinlog = False

        def setrepo(self, repo):
            self._bbrepo = repo

    ui.__class__ = blackboxui
    uimod.ui = blackboxui

def uisetup(ui):
    wrapui(ui)

def reposetup(ui, repo):
    # During 'hg pull' a httppeer repo is created to represent the remote repo.
    # It doesn't have a .hg directory to put a blackbox in, so we don't do
    # the blackbox setup for it.
    if not repo.local():
        return

    if util.safehasattr(ui, 'setrepo'):
        ui.setrepo(repo)

        # Set lastui even if ui.log is not called. This gives blackbox a
        # fallback place to log.
        global lastui
        if lastui is None:
            lastui = ui

    repo._wlockfreeprefix.add('blackbox.log')

@command('^blackbox',
    [('l', 'limit', 10, _('the number of events to show')),
    ],
    _('hg blackbox [OPTION]...'))
def blackbox(ui, repo, *revs, **opts):
    '''view the recent repository events
    '''

    if not repo.vfs.exists('blackbox.log'):
        return

    limit = opts.get(r'limit')
    fp = repo.vfs('blackbox.log', 'r')
    lines = fp.read().split('\n')

    count = 0
    output = []
    for line in reversed(lines):
        if count >= limit:
            break

        # count the commands by matching lines like: 2013/01/23 19:13:36 root>
        if re.match('^\d{4}/\d{2}/\d{2} \d{2}:\d{2}:\d{2} .*> .*', line):
            count += 1
        output.append(line)

    ui.status('\n'.join(reversed(output)))