view hgext/largefiles/uisetup.py @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

# Copyright 2009-2010 Gregory P. Ward
# Copyright 2009-2010 Intelerad Medical Systems Incorporated
# Copyright 2010-2011 Fog Creek Software
# Copyright 2010-2011 Unity Technologies
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''setup for largefiles extension: uisetup'''
from __future__ import absolute_import

from mercurial.i18n import _

from mercurial.hgweb import (
    hgweb_mod,
    webcommands,
)

from mercurial import (
    archival,
    cmdutil,
    commands,
    copies,
    exchange,
    extensions,
    filemerge,
    hg,
    httppeer,
    merge,
    scmutil,
    sshpeer,
    subrepo,
    upgrade,
    wireproto,
)

from . import (
    overrides,
    proto,
)

def uisetup(ui):
    # Disable auto-status for some commands which assume that all
    # files in the result are under Mercurial's control

    entry = extensions.wrapcommand(commands.table, 'add',
                                   overrides.overrideadd)
    addopt = [('', 'large', None, _('add as largefile')),
              ('', 'normal', None, _('add as normal file')),
              ('', 'lfsize', '', _('add all files above this size '
                                   '(in megabytes) as largefiles '
                                   '(default: 10)'))]
    entry[1].extend(addopt)

    # The scmutil function is called both by the (trivial) addremove command,
    # and in the process of handling commit -A (issue3542)
    extensions.wrapfunction(scmutil, 'addremove', overrides.scmutiladdremove)
    extensions.wrapfunction(cmdutil, 'add', overrides.cmdutiladd)
    extensions.wrapfunction(cmdutil, 'remove', overrides.cmdutilremove)
    extensions.wrapfunction(cmdutil, 'forget', overrides.cmdutilforget)

    extensions.wrapfunction(copies, 'pathcopies', overrides.copiespathcopies)

    extensions.wrapfunction(upgrade, 'preservedrequirements',
                            overrides.upgraderequirements)

    extensions.wrapfunction(upgrade, 'supporteddestrequirements',
                            overrides.upgraderequirements)

    # Subrepos call status function
    entry = extensions.wrapcommand(commands.table, 'status',
                                   overrides.overridestatus)
    extensions.wrapfunction(subrepo.hgsubrepo, 'status',
                            overrides.overridestatusfn)

    entry = extensions.wrapcommand(commands.table, 'log',
                                   overrides.overridelog)
    entry = extensions.wrapcommand(commands.table, 'rollback',
                                   overrides.overriderollback)
    entry = extensions.wrapcommand(commands.table, 'verify',
                                   overrides.overrideverify)

    verifyopt = [('', 'large', None,
                  _('verify that all largefiles in current revision exists')),
                 ('', 'lfa', None,
                  _('verify largefiles in all revisions, not just current')),
                 ('', 'lfc', None,
                  _('verify local largefile contents, not just existence'))]
    entry[1].extend(verifyopt)

    entry = extensions.wrapcommand(commands.table, 'debugstate',
                                   overrides.overridedebugstate)
    debugstateopt = [('', 'large', None, _('display largefiles dirstate'))]
    entry[1].extend(debugstateopt)

    outgoing = lambda orgfunc, *arg, **kwargs: orgfunc(*arg, **kwargs)
    entry = extensions.wrapcommand(commands.table, 'outgoing', outgoing)
    outgoingopt = [('', 'large', None, _('display outgoing largefiles'))]
    entry[1].extend(outgoingopt)
    cmdutil.outgoinghooks.add('largefiles', overrides.outgoinghook)
    entry = extensions.wrapcommand(commands.table, 'summary',
                                   overrides.overridesummary)
    summaryopt = [('', 'large', None, _('display outgoing largefiles'))]
    entry[1].extend(summaryopt)
    cmdutil.summaryremotehooks.add('largefiles', overrides.summaryremotehook)

    entry = extensions.wrapcommand(commands.table, 'pull',
                                   overrides.overridepull)
    pullopt = [('', 'all-largefiles', None,
                 _('download all pulled versions of largefiles (DEPRECATED)')),
               ('', 'lfrev', [],
                _('download largefiles for these revisions'), _('REV'))]
    entry[1].extend(pullopt)

    entry = extensions.wrapcommand(commands.table, 'push',
                                   overrides.overridepush)
    pushopt = [('', 'lfrev', [],
                _('upload largefiles for these revisions'), _('REV'))]
    entry[1].extend(pushopt)
    extensions.wrapfunction(exchange, 'pushoperation',
                            overrides.exchangepushoperation)

    entry = extensions.wrapcommand(commands.table, 'clone',
                                   overrides.overrideclone)
    cloneopt = [('', 'all-largefiles', None,
                 _('download all versions of all largefiles'))]
    entry[1].extend(cloneopt)
    extensions.wrapfunction(hg, 'clone', overrides.hgclone)
    extensions.wrapfunction(hg, 'postshare', overrides.hgpostshare)

    entry = extensions.wrapcommand(commands.table, 'cat',
                                   overrides.overridecat)
    extensions.wrapfunction(merge, '_checkunknownfile',
                            overrides.overridecheckunknownfile)
    extensions.wrapfunction(merge, 'calculateupdates',
                            overrides.overridecalculateupdates)
    extensions.wrapfunction(merge, 'recordupdates',
                            overrides.mergerecordupdates)
    extensions.wrapfunction(merge, 'update', overrides.mergeupdate)
    extensions.wrapfunction(filemerge, '_filemerge',
                            overrides.overridefilemerge)
    extensions.wrapfunction(cmdutil, 'copy', overrides.overridecopy)

    # Summary calls dirty on the subrepos
    extensions.wrapfunction(subrepo.hgsubrepo, 'dirty', overrides.overridedirty)

    extensions.wrapfunction(cmdutil, 'revert', overrides.overriderevert)

    extensions.wrapcommand(commands.table, 'archive',
                           overrides.overridearchivecmd)
    extensions.wrapfunction(archival, 'archive', overrides.overridearchive)
    extensions.wrapfunction(subrepo.hgsubrepo, 'archive',
                            overrides.hgsubrepoarchive)
    extensions.wrapfunction(webcommands, 'archive', overrides.hgwebarchive)
    extensions.wrapfunction(cmdutil, 'bailifchanged',
                            overrides.overridebailifchanged)

    extensions.wrapfunction(cmdutil, 'postcommitstatus',
                            overrides.postcommitstatus)
    extensions.wrapfunction(scmutil, 'marktouched',
                            overrides.scmutilmarktouched)

    # create the new wireproto commands ...
    wireproto.commands['putlfile'] = (proto.putlfile, 'sha')
    wireproto.commands['getlfile'] = (proto.getlfile, 'sha')
    wireproto.commands['statlfile'] = (proto.statlfile, 'sha')

    # ... and wrap some existing ones
    wireproto.commands['capabilities'] = (proto.capabilities, '')
    wireproto.commands['heads'] = (proto.heads, '')
    wireproto.commands['lheads'] = (wireproto.heads, '')

    # make putlfile behave the same as push and {get,stat}lfile behave
    # the same as pull w.r.t. permissions checks
    hgweb_mod.perms['putlfile'] = 'push'
    hgweb_mod.perms['getlfile'] = 'pull'
    hgweb_mod.perms['statlfile'] = 'pull'

    extensions.wrapfunction(webcommands, 'decodepath', overrides.decodepath)

    # the hello wireproto command uses wireproto.capabilities, so it won't see
    # our largefiles capability unless we replace the actual function as well.
    proto.capabilitiesorig = wireproto.capabilities
    wireproto.capabilities = proto.capabilities

    # can't do this in reposetup because it needs to have happened before
    # wirerepo.__init__ is called
    proto.ssholdcallstream = sshpeer.sshpeer._callstream
    proto.httpoldcallstream = httppeer.httppeer._callstream
    sshpeer.sshpeer._callstream = proto.sshrepocallstream
    httppeer.httppeer._callstream = proto.httprepocallstream

    # override some extensions' stuff as well
    for name, module in extensions.extensions():
        if name == 'purge':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'purge',
                overrides.overridepurge)
        if name == 'rebase':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'rebase',
                overrides.overriderebase)
            extensions.wrapfunction(module, 'rebase',
                                    overrides.overriderebase)
        if name == 'transplant':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'transplant',
                overrides.overridetransplant)