view tests/test-contrib.t @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

Set vars:

  $ CONTRIBDIR="$TESTDIR/../contrib"

Prepare repo-a:

  $ hg init repo-a
  $ cd repo-a

  $ echo this is file a > a
  $ hg add a
  $ hg commit -m first

  $ echo adding to file a >> a
  $ hg commit -m second

  $ echo adding more to file a >> a
  $ hg commit -m third

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Dumping revlog of file a to stdout:

  $ $PYTHON "$CONTRIBDIR/dumprevlog" .hg/store/data/a.i
  file: .hg/store/data/a.i
  node: 183d2312b35066fb6b3b449b84efc370d50993d0
  linkrev: 0
  parents: 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
  length: 15
  -start-
  this is file a
  
  -end-
  node: b1047953b6e6b633c0d8197eaa5116fbdfd3095b
  linkrev: 1
  parents: 183d2312b35066fb6b3b449b84efc370d50993d0 0000000000000000000000000000000000000000
  length: 32
  -start-
  this is file a
  adding to file a
  
  -end-
  node: 8c4fd1f7129b8cdec6c7f58bf48fb5237a4030c1
  linkrev: 2
  parents: b1047953b6e6b633c0d8197eaa5116fbdfd3095b 0000000000000000000000000000000000000000
  length: 54
  -start-
  this is file a
  adding to file a
  adding more to file a
  
  -end-

Dump all revlogs to file repo.dump:

  $ find .hg/store -name "*.i" | sort | xargs $PYTHON "$CONTRIBDIR/dumprevlog" > ../repo.dump
  $ cd ..

Undumping into repo-b:

  $ hg init repo-b
  $ cd repo-b
  $ $PYTHON "$CONTRIBDIR/undumprevlog" < ../repo.dump
  .hg/store/00changelog.i
  .hg/store/00manifest.i
  .hg/store/data/a.i
  $ cd ..

Rebuild fncache with clone --pull:

  $ hg clone --pull -U repo-b repo-c
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  new changesets de1da620e7d8:46946d278c50

Verify:

  $ hg -R repo-c verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Compare repos:

  $ hg -R repo-c incoming repo-a
  comparing with repo-a
  searching for changes
  no changes found
  [1]

  $ hg -R repo-a incoming repo-c
  comparing with repo-c
  searching for changes
  no changes found
  [1]

Test simplemerge command:

  $ cp "$CONTRIBDIR/simplemerge" .
  $ echo base > base
  $ echo local > local
  $ cat base >> local
  $ cp local orig
  $ cat base > other
  $ echo other >> other

changing local directly

  $ $PYTHON simplemerge local base other && echo "merge succeeded"
  merge succeeded
  $ cat local
  local
  base
  other
  $ cp orig local

printing to stdout

  $ $PYTHON simplemerge -p local base other
  local
  base
  other

local:

  $ cat local
  local
  base

conflicts

  $ cp base conflict-local
  $ cp other conflict-other
  $ echo not other >> conflict-local
  $ echo end >> conflict-local
  $ echo end >> conflict-other

  $ $PYTHON simplemerge -p conflict-local base conflict-other
  base
  <<<<<<< conflict-local
  not other
  =======
  other
  >>>>>>> conflict-other
  end
  [1]

1 label

  $ $PYTHON simplemerge -p -L foo conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  =======
  other
  >>>>>>> conflict-other
  end
  [1]

2 labels

  $ $PYTHON simplemerge -p -L foo -L bar conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  =======
  other
  >>>>>>> bar
  end
  [1]

3 labels

  $ $PYTHON simplemerge -p -L foo -L bar -L base conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  ||||||| base
  =======
  other
  end
  >>>>>>> bar
  [1]

too many labels

  $ $PYTHON simplemerge -p -L foo -L bar -L baz -L buz conflict-local base conflict-other
  abort: can only specify three labels.
  [255]

binary file

  $ $PYTHON -c "f = file('binary-local', 'w'); f.write('\x00'); f.close()"
  $ cat orig >> binary-local
  $ $PYTHON simplemerge -p binary-local base other
  warning: binary-local looks like a binary file.
  [1]

binary file --text

  $ $PYTHON simplemerge -a -p binary-local base other 2>&1
  warning: binary-local looks like a binary file.
  \x00local (esc)
  base
  other

help

  $ $PYTHON simplemerge --help
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output

wrong number of arguments

  $ $PYTHON simplemerge
  simplemerge: wrong number of arguments
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]

bad option

  $ $PYTHON simplemerge --foo -p local base other
  simplemerge: option --foo not recognized
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]