view tests/test-convert-p4.t @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

#require p4

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create p4 depot
  $ P4ROOT=`pwd`/depot; export P4ROOT
  $ P4AUDIT=$P4ROOT/audit; export P4AUDIT
  $ P4JOURNAL=$P4ROOT/journal; export P4JOURNAL
  $ P4LOG=$P4ROOT/log; export P4LOG
  $ P4PORT=localhost:$HGPORT; export P4PORT
  $ P4DEBUG=1; export P4DEBUG

start the p4 server
  $ [ ! -d $P4ROOT ] && mkdir $P4ROOT
  $ p4d -f -J off >$P4ROOT/stdout 2>$P4ROOT/stderr &
  $ echo $! >> $DAEMON_PIDS
  $ trap "echo stopping the p4 server ; p4 admin stop" EXIT

  $ # wait for the server to initialize
  $ while ! p4 ; do
  >    sleep 1
  > done >/dev/null 2>/dev/null

create a client spec
  $ P4CLIENT=hg-p4-import; export P4CLIENT
  $ DEPOTPATH=//depot/test-mercurial-import/...
  $ p4 client -o | sed '/^View:/,$ d' >p4client
  $ echo View: >>p4client
  $ echo " $DEPOTPATH //$P4CLIENT/..." >>p4client
  $ p4 client -i <p4client
  Client hg-p4-import saved.

populate the depot
  $ echo a > a
  $ mkdir b
  $ echo c > b/c
  $ p4 add a b/c
  //depot/test-mercurial-import/a#1 - opened for add
  //depot/test-mercurial-import/b/c#1 - opened for add
  $ p4 submit -d initial
  Submitting change 1.
  Locking 2 files ...
  add //depot/test-mercurial-import/a#1
  add //depot/test-mercurial-import/b/c#1
  Change 1 submitted.

change some files
  $ p4 edit a
  //depot/test-mercurial-import/a#1 - opened for edit
  $ echo aa >> a
  $ p4 submit -d "change a"
  Submitting change 2.
  Locking 1 files ...
  edit //depot/test-mercurial-import/a#2
  Change 2 submitted.

  $ p4 edit b/c
  //depot/test-mercurial-import/b/c#1 - opened for edit
  $ echo cc >> b/c
  $ p4 submit -d "change b/c"
  Submitting change 3.
  Locking 1 files ...
  edit //depot/test-mercurial-import/b/c#2
  Change 3 submitted.

convert
  $ hg convert -s p4 $DEPOTPATH dst
  initializing destination dst repository
  scanning source...
  reading p4 views
  collecting p4 changelists
  1 initial
  2 change a
  3 change b/c
  sorting...
  converting...
  2 initial
  1 change a
  0 change b/c
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=2 desc="change b/c" tags="tip" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

change some files
  $ p4 edit a b/c
  //depot/test-mercurial-import/a#2 - opened for edit
  //depot/test-mercurial-import/b/c#2 - opened for edit
  $ echo aaa >> a
  $ echo ccc >> b/c
  $ p4 submit -d "change a b/c"
  Submitting change 4.
  Locking 2 files ...
  edit //depot/test-mercurial-import/a#3
  edit //depot/test-mercurial-import/b/c#3
  Change 4 submitted.

convert again
  $ hg convert -s p4 $DEPOTPATH dst
  scanning source...
  reading p4 views
  collecting p4 changelists
  4 change a b/c
  sorting...
  converting...
  0 change a b/c
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=3 desc="change a b/c" tags="tip" files="a b/c"
  rev=2 desc="change b/c" tags="" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

interesting names
  $ echo dddd > "d d"
  $ mkdir " e"
  $ echo fff >" e/ f"
  $ p4 add "d d" " e/ f"
  //depot/test-mercurial-import/d d#1 - opened for add
  //depot/test-mercurial-import/ e/ f#1 - opened for add
  $ p4 submit -d "add d e f"
  Submitting change 5.
  Locking 2 files ...
  add //depot/test-mercurial-import/ e/ f#1
  add //depot/test-mercurial-import/d d#1
  Change 5 submitted.

convert again
  $ hg convert -s p4 $DEPOTPATH dst
  scanning source...
  reading p4 views
  collecting p4 changelists
  5 add d e f
  sorting...
  converting...
  0 add d e f
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=4 desc="add d e f" tags="tip" files=" e/ f d d"
  rev=3 desc="change a b/c" tags="" files="a b/c"
  rev=2 desc="change b/c" tags="" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

empty commit message
  $ p4 edit a
  //depot/test-mercurial-import/a#3 - opened for edit
  $ echo aaaaa >> a
  $ p4 submit -d ""
  Submitting change 6.
  Locking 1 files ...
  edit //depot/test-mercurial-import/a#4
  Change 6 submitted.
  $ hg convert -s p4 $DEPOTPATH dst
  scanning source...
  reading p4 views
  collecting p4 changelists
  6 **empty changelist description**
  sorting...
  converting...
  0 

exit trap:
  stopping the p4 server