view tests/test-convert-svn-sink.t @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

#require svn13

  $ svnupanddisplay()
  > {
  >     (
  >        cd $1;
  >        svn up -q;
  >        svn st -v | sed 's/  */ /g' | sort
  >        limit=''
  >        if [ $2 -gt 0 ]; then
  >            limit="--limit=$2"
  >        fi
  >        svn log --xml -v $limit | $PYTHON "$TESTDIR/svnxml.py"
  >     )
  > }

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ hg init a

Add

  $ echo a > a/a
  $ mkdir -p a/d1/d2
  $ echo b > a/d1/d2/b
  $ hg --cwd a ci -d '0 0' -A -m 'add a file'
  adding a
  adding d1/d2/b

Modify

  $ svn-safe-append.py a a/a
  $ hg --cwd a ci -d '1 0' -m 'modify a file'
  $ hg --cwd a tip -q
  1:e0e2b8a9156b

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 add a file
  0 modify a file
  $ svnupanddisplay a-hg-wc 2
   2 1 test d1
   2 1 test d1/d2
   2 1 test d1/d2/b
   2 2 test .
   2 2 test a
  revision: 2
  author: test
  msg: modify a file
   M /a
  revision: 1
  author: test
  msg: add a file
   A /a
   A /d1
   A /d1/d2
   A /d1/d2/b
  $ ls a a-hg-wc
  a:
  a
  d1
  
  a-hg-wc:
  a
  d1
  $ cmp a/a a-hg-wc/a

Rename

  $ hg --cwd a mv a b
  $ hg --cwd a ci -d '2 0' -m 'rename a file'
  $ hg --cwd a tip -q
  2:eb5169441d43

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 rename a file
  $ svnupanddisplay a-hg-wc 1
   3 1 test d1
   3 1 test d1/d2
   3 1 test d1/d2/b
   3 3 test .
   3 3 test b
  revision: 3
  author: test
  msg: rename a file
   D /a
   A /b (from /a@2)
  $ ls a a-hg-wc
  a:
  b
  d1
  
  a-hg-wc:
  b
  d1

Copy

  $ hg --cwd a cp b c

  $ hg --cwd a ci -d '3 0' -m 'copy a file'
  $ hg --cwd a tip -q
  3:60effef6ab48

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy a file
  $ svnupanddisplay a-hg-wc 1
   4 1 test d1
   4 1 test d1/d2
   4 1 test d1/d2/b
   4 3 test b
   4 4 test .
   4 4 test c
  revision: 4
  author: test
  msg: copy a file
   A /c (from /b@3)
  $ ls a a-hg-wc
  a:
  b
  c
  d1
  
  a-hg-wc:
  b
  c
  d1

  $ hg --cwd a rm b

Remove

  $ hg --cwd a ci -d '4 0' -m 'remove a file'
  $ hg --cwd a tip -q
  4:87bbe3013fb6

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 remove a file
  $ svnupanddisplay a-hg-wc 1
   5 1 test d1
   5 1 test d1/d2
   5 1 test d1/d2/b
   5 4 test c
   5 5 test .
  revision: 5
  author: test
  msg: remove a file
   D /b
  $ ls a a-hg-wc
  a:
  c
  d1
  
  a-hg-wc:
  c
  d1

Executable

#if execbit
  $ chmod +x a/c
#else
  $ echo fake >> a/c
#endif
  $ hg --cwd a ci -d '5 0' -m 'make a file executable'
#if execbit
  $ hg --cwd a tip -q
  5:ff42e473c340
#else
  $ hg --cwd a tip -q
  5:817a700c8cf1
#endif

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 make a file executable
  $ svnupanddisplay a-hg-wc 1
   6 1 test d1
   6 1 test d1/d2
   6 1 test d1/d2/b
   6 6 test .
   6 6 test c
  revision: 6
  author: test
  msg: make a file executable
   M /c
#if execbit
  $ test -x a-hg-wc/c
#endif

#if symlink

Symlinks

  $ ln -s a/missing a/link
  $ hg --cwd a commit -Am 'add symlink'
  adding link
  $ hg --cwd a mv link newlink
  $ hg --cwd a commit -m 'move symlink'
  $ hg convert -d svn a a-svnlink
  initializing svn repository 'a-svnlink'
  initializing svn working copy 'a-svnlink-wc'
  scanning source...
  sorting...
  converting...
  7 add a file
  6 modify a file
  5 rename a file
  4 copy a file
  3 remove a file
  2 make a file executable
  1 add symlink
  0 move symlink
  $ svnupanddisplay a-svnlink-wc 1
   8 1 test d1
   8 1 test d1/d2
   8 1 test d1/d2/b
   8 6 test c
   8 8 test .
   8 8 test newlink
  revision: 8
  author: test
  msg: move symlink
   D /link
   A /newlink (from /link@7)

Make sure our changes don't affect the rest of the test cases

  $ hg --cwd a up 5
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg --cwd a --config extensions.strip= strip -r 6
  saved backup bundle to $TESTTMP/a/.hg/strip-backup/bd4f7b7a7067-ed505e42-backup.hg

#endif

Convert with --full adds and removes files that didn't change

  $ touch a/f
  $ hg -R a ci -Aqmf
  $ echo "rename c d" > filemap
  $ hg convert -d svn a --filemap filemap --full
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 f
  $ svnupanddisplay a-hg-wc 1
   7 7 test .
   7 7 test d
   7 7 test f
  revision: 7
  author: test
  msg: f
   D /c
   A /d
   D /d1
   A /f

  $ rm -rf a a-hg a-hg-wc


Executable in new directory

  $ hg init a

  $ mkdir a/d1
  $ echo a > a/d1/a
#if execbit
  $ chmod +x a/d1/a
#else
  $ echo fake >> a/d1/a
#endif
  $ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory'
  adding d1/a

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 add executable file in new directory
  $ svnupanddisplay a-hg-wc 1
   1 1 test .
   1 1 test d1
   1 1 test d1/a
  revision: 1
  author: test
  msg: add executable file in new directory
   A /d1
   A /d1/a
#if execbit
  $ test -x a-hg-wc/d1/a
#endif

Copy to new directory

  $ mkdir a/d2
  $ hg --cwd a cp d1/a d2/a
  $ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory'

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy file to new directory
  $ svnupanddisplay a-hg-wc 1
   2 1 test d1
   2 1 test d1/a
   2 2 test .
   2 2 test d2
   2 2 test d2/a
  revision: 2
  author: test
  msg: copy file to new directory
   A /d2
   A /d2/a (from /d1/a@1)

Branchy history

  $ hg init b
  $ echo base > b/b
  $ hg --cwd b ci -d '0 0' -Ambase
  adding b

  $ svn-safe-append.py left-1 b/b
  $ echo left-1 > b/left-1
  $ hg --cwd b ci -d '1 0' -Amleft-1
  adding left-1

  $ svn-safe-append.py left-2 b/b
  $ echo left-2 > b/left-2
  $ hg --cwd b ci -d '2 0' -Amleft-2
  adding left-2

  $ hg --cwd b up 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

  $ svn-safe-append.py right-1 b/b
  $ echo right-1 > b/right-1
  $ hg --cwd b ci -d '3 0' -Amright-1
  adding right-1
  created new head

  $ svn-safe-append.py right-2 b/b
  $ echo right-2 > b/right-2
  $ hg --cwd b ci -d '4 0' -Amright-2
  adding right-2

  $ hg --cwd b up -C 2
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg --cwd b merge
  merging b
  warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg --cwd b revert -r 2 b
  $ hg --cwd b resolve -m b
  (no more unresolved files)
  $ hg --cwd b ci -d '5 0' -m 'merge'

Expect 4 changes

  $ hg convert -d svn b
  assuming destination b-hg
  initializing svn repository 'b-hg'
  initializing svn working copy 'b-hg-wc'
  scanning source...
  sorting...
  converting...
  5 base
  4 left-1
  3 left-2
  2 right-1
  1 right-2
  0 merge

  $ svnupanddisplay b-hg-wc 0
   4 2 test left-1
   4 3 test b
   4 3 test left-2
   4 4 test .
   4 4 test right-1
   4 4 test right-2
  revision: 4
  author: test
  msg: merge
   A /right-1
   A /right-2
  revision: 3
  author: test
  msg: left-2
   M /b
   A /left-2
  revision: 2
  author: test
  msg: left-1
   M /b
   A /left-1
  revision: 1
  author: test
  msg: base
   A /b

Tags are not supported, but must not break conversion

  $ rm -rf a a-hg a-hg-wc
  $ hg init a
  $ echo a > a/a
  $ hg --cwd a ci -d '0 0' -A -m 'Add file a'
  adding a
  $ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 Add file a
  0 Tagged as v1.0
  writing Subversion tags is not yet implemented
  $ svnupanddisplay a-hg-wc 2
   2 1 test a
   2 2 test .
   2 2 test .hgtags
  revision: 2
  author: test
  msg: Tagged as v1.0
   A /.hgtags
  revision: 1
  author: test
  msg: Add file a
   A /a
  $ rm -rf a a-hg a-hg-wc