Mercurial > hg
view tests/test-fileset.t @ 35449:24528dba0e64
run-tests: add substitution patterns for common '\' path output on Windows
The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows. Since the OS prints the proper paths everywhere else, this
is limited to Windows. These are based on the check-code rules that were
dropped in 5feb782c7a95.
There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern. End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.
The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group. The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.
The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns. There are probably others.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Tue, 12 Dec 2017 20:11:13 -0500 |
parents | 7bbc4e113e5f |
children | 735f47b41521 |
line wrap: on
line source
$ fileset() { > hg debugfileset "$@" > } $ hg init repo $ cd repo $ echo a > a1 $ echo a > a2 $ echo b > b1 $ echo b > b2 $ hg ci -Am addfiles adding a1 adding a2 adding b1 adding b2 Test operators and basic patterns $ fileset -v a1 (symbol 'a1') a1 $ fileset -v 'a*' (symbol 'a*') a1 a2 $ fileset -v '"re:a\d"' (string 're:a\\d') a1 a2 $ fileset -v 'a1 or a2' (or (symbol 'a1') (symbol 'a2')) a1 a2 $ fileset 'a1 | a2' a1 a2 $ fileset 'a* and "*1"' a1 $ fileset 'a* & "*1"' a1 $ fileset 'not (r"a*")' b1 b2 $ fileset '! ("a*")' b1 b2 $ fileset 'a* - a1' a2 $ fileset 'a_b' $ fileset '"\xy"' hg: parse error: invalid \x escape [255] Test files status $ rm a1 $ hg rm a2 $ echo b >> b2 $ hg cp b1 c1 $ echo c > c2 $ echo c > c3 $ cat > .hgignore <<EOF > \.hgignore > 2$ > EOF $ fileset 'modified()' b2 $ fileset 'added()' c1 $ fileset 'removed()' a2 $ fileset 'deleted()' a1 $ fileset 'missing()' a1 $ fileset 'unknown()' c3 $ fileset 'ignored()' .hgignore c2 $ fileset 'hgignore()' a2 b2 $ fileset 'clean()' b1 $ fileset 'copied()' c1 Test files status in different revisions $ hg status -m M b2 $ fileset -r0 'revs("wdir()", modified())' --traceback b2 $ hg status -a A c1 $ fileset -r0 'revs("wdir()", added())' c1 $ hg status --change 0 -a A a1 A a2 A b1 A b2 $ hg status -mru M b2 R a2 ? c3 $ fileset -r0 'added() and revs("wdir()", modified() or removed() or unknown())' b2 a2 $ fileset -r0 'added() or revs("wdir()", added())' a1 a2 b1 b2 c1 Test files properties >>> file('bin', 'wb').write('\0a') $ fileset 'binary()' $ fileset 'binary() and unknown()' bin $ echo '^bin$' >> .hgignore $ fileset 'binary() and ignored()' bin $ hg add bin $ fileset 'binary()' bin $ fileset 'grep("b{1}")' b2 c1 b1 $ fileset 'grep("missingparens(")' hg: parse error: invalid match pattern: unbalanced parenthesis [255] #if execbit $ chmod +x b2 $ fileset 'exec()' b2 #endif #if symlink $ ln -s b2 b2link $ fileset 'symlink() and unknown()' b2link $ hg add b2link #endif #if no-windows $ echo foo > con.xml $ fileset 'not portable()' con.xml $ hg --config ui.portablefilenames=ignore add con.xml #endif >>> file('1k', 'wb').write(' '*1024) >>> file('2k', 'wb').write(' '*2048) $ hg add 1k 2k $ fileset 'size("bar")' hg: parse error: couldn't parse size: bar [255] $ fileset '(1k, 2k)' hg: parse error: can't use a list in this context (see hg help "filesets.x or y") [255] $ fileset 'size(1k)' 1k $ fileset '(1k or 2k) and size("< 2k")' 1k $ fileset '(1k or 2k) and size("<=2k")' 1k 2k $ fileset '(1k or 2k) and size("> 1k")' 2k $ fileset '(1k or 2k) and size(">=1K")' 1k 2k $ fileset '(1k or 2k) and size(".5KB - 1.5kB")' 1k $ fileset 'size("1M")' $ fileset 'size("1 GB")' Test merge states $ hg ci -m manychanges $ hg up -C 0 * files updated, 0 files merged, * files removed, 0 files unresolved (glob) $ echo c >> b2 $ hg ci -m diverging b2 created new head $ fileset 'resolved()' $ fileset 'unresolved()' $ hg merge merging b2 warning: conflicts while merging b2! (edit, then use 'hg resolve --mark') * files updated, 0 files merged, 1 files removed, 1 files unresolved (glob) use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon [1] $ fileset 'resolved()' $ fileset 'unresolved()' b2 $ echo e > b2 $ hg resolve -m b2 (no more unresolved files) $ fileset 'resolved()' b2 $ fileset 'unresolved()' $ hg ci -m merge Test subrepo predicate $ hg init sub $ echo a > sub/suba $ hg -R sub add sub/suba $ hg -R sub ci -m sub $ echo 'sub = sub' > .hgsub $ hg init sub2 $ echo b > sub2/b $ hg -R sub2 ci -Am sub2 adding b $ echo 'sub2 = sub2' >> .hgsub $ fileset 'subrepo()' $ hg add .hgsub $ fileset 'subrepo()' sub sub2 $ fileset 'subrepo("sub")' sub $ fileset 'subrepo("glob:*")' sub sub2 $ hg ci -m subrepo Test that .hgsubstate is updated as appropriate during a conversion. The saverev property is enough to alter the hashes of the subrepo. $ hg init ../converted $ hg --config extensions.convert= convert --config convert.hg.saverev=True \ > sub ../converted/sub initializing destination ../converted/sub repository scanning source... sorting... converting... 0 sub $ hg clone -U sub2 ../converted/sub2 $ hg --config extensions.convert= convert --config convert.hg.saverev=True \ > . ../converted scanning source... sorting... converting... 4 addfiles 3 manychanges 2 diverging 1 merge 0 subrepo no ".hgsubstate" updates will be made for "sub2" $ hg up -q -R ../converted -r tip $ hg --cwd ../converted cat sub/suba sub2/b -r tip a b $ oldnode=`hg log -r tip -T "{node}\n"` $ newnode=`hg log -R ../converted -r tip -T "{node}\n"` $ [ "$oldnode" != "$newnode" ] || echo "nothing changed" Test with a revision $ hg log -G --template '{rev} {desc}\n' @ 4 subrepo | o 3 merge |\ | o 2 diverging | | o | 1 manychanges |/ o 0 addfiles $ echo unknown > unknown $ fileset -r1 'modified()' b2 $ fileset -r1 'added() and c1' c1 $ fileset -r1 'removed()' a2 $ fileset -r1 'deleted()' $ fileset -r1 'unknown()' $ fileset -r1 'ignored()' $ fileset -r1 'hgignore()' b2 bin $ fileset -r1 'binary()' bin $ fileset -r1 'size(1k)' 1k $ fileset -r3 'resolved()' $ fileset -r3 'unresolved()' #if execbit $ fileset -r1 'exec()' b2 #endif #if symlink $ fileset -r1 'symlink()' b2link #endif #if no-windows $ fileset -r1 'not portable()' con.xml $ hg forget 'con.xml' #endif $ fileset -r4 'subrepo("re:su.*")' sub sub2 $ fileset -r4 'subrepo("sub")' sub $ fileset -r4 'b2 or c1' b2 c1 >>> open('dos', 'wb').write("dos\r\n") >>> open('mixed', 'wb').write("dos\r\nunix\n") >>> open('mac', 'wb').write("mac\r") $ hg add dos mixed mac (remove a1, to examine safety of 'eol' on removed files) $ rm a1 $ fileset 'eol(dos)' dos mixed $ fileset 'eol(unix)' mixed .hgsub .hgsubstate b1 b2 c1 $ fileset 'eol(mac)' mac Test safety of 'encoding' on removed files $ fileset 'encoding("ascii")' dos mac mixed .hgsub .hgsubstate 1k 2k b1 b2 b2link (symlink !) bin c1 Test detection of unintentional 'matchctx.existing()' invocation $ cat > $TESTTMP/existingcaller.py <<EOF > from mercurial import registrar > > filesetpredicate = registrar.filesetpredicate() > @filesetpredicate('existingcaller()', callexisting=False) > def existingcaller(mctx, x): > # this 'mctx.existing()' invocation is unintentional > return [f for f in mctx.existing()] > EOF $ cat >> .hg/hgrc <<EOF > [extensions] > existingcaller = $TESTTMP/existingcaller.py > EOF $ fileset 'existingcaller()' 2>&1 | tail -1 AssertionError: unexpected existing() invocation Test 'revs(...)' ================ small reminder of the repository state $ hg log -G @ changeset: 4:* (glob) | tag: tip | user: test | date: Thu Jan 01 00:00:00 1970 +0000 | summary: subrepo | o changeset: 3:* (glob) |\ parent: 2:55b05bdebf36 | | parent: 1:* (glob) | | user: test | | date: Thu Jan 01 00:00:00 1970 +0000 | | summary: merge | | | o changeset: 2:55b05bdebf36 | | parent: 0:8a9576c51c1f | | user: test | | date: Thu Jan 01 00:00:00 1970 +0000 | | summary: diverging | | o | changeset: 1:* (glob) |/ user: test | date: Thu Jan 01 00:00:00 1970 +0000 | summary: manychanges | o changeset: 0:8a9576c51c1f user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: addfiles $ hg status --change 0 A a1 A a2 A b1 A b2 $ hg status --change 1 M b2 A 1k A 2k A b2link (no-windows !) A bin A c1 A con.xml (no-windows !) R a2 $ hg status --change 2 M b2 $ hg status --change 3 M b2 A 1k A 2k A b2link (no-windows !) A bin A c1 A con.xml (no-windows !) R a2 $ hg status --change 4 A .hgsub A .hgsubstate $ hg status A dos A mac A mixed R con.xml (no-windows !) ! a1 ? b2.orig ? c3 ? unknown Test files at -r0 should be filtered by files at wdir ----------------------------------------------------- $ fileset -r0 '* and revs("wdir()", *)' a1 b1 b2 Test that "revs()" work at all ------------------------------ $ fileset "revs('2', modified())" b2 Test that "revs()" work for file missing in the working copy/current context ---------------------------------------------------------------------------- (a2 not in working copy) $ fileset "revs('0', added())" a1 a2 b1 b2 (none of the file exist in "0") $ fileset -r 0 "revs('4', added())" .hgsub .hgsubstate Call with empty revset -------------------------- $ fileset "revs('2-2', modified())" Call with revset matching multiple revs --------------------------------------- $ fileset "revs('0+4', added())" a1 a2 b1 b2 .hgsub .hgsubstate overlapping set $ fileset "revs('1+2', modified())" b2 test 'status(...)' ================= Simple case ----------- $ fileset "status(3, 4, added())" .hgsub .hgsubstate use rev to restrict matched file ----------------------------------------- $ hg status --removed --rev 0 --rev 1 R a2 $ fileset "status(0, 1, removed())" a2 $ fileset "* and status(0, 1, removed())" $ fileset -r 4 "status(0, 1, removed())" a2 $ fileset -r 4 "* and status(0, 1, removed())" $ fileset "revs('4', * and status(0, 1, removed()))" $ fileset "revs('0', * and status(0, 1, removed()))" a2 check wdir() ------------ $ hg status --removed --rev 4 R con.xml (no-windows !) $ fileset "status(4, 'wdir()', removed())" con.xml (no-windows !) $ hg status --removed --rev 2 R a2 $ fileset "status('2', 'wdir()', removed())" a2 test backward status -------------------- $ hg status --removed --rev 0 --rev 4 R a2 $ hg status --added --rev 4 --rev 0 A a2 $ fileset "status(4, 0, added())" a2 test cross branch status ------------------------ $ hg status --added --rev 1 --rev 2 A a2 $ fileset "status(1, 2, added())" a2 test with multi revs revset --------------------------- $ hg status --added --rev 0:1 --rev 3:4 A .hgsub A .hgsubstate A 1k A 2k A b2link (no-windows !) A bin A c1 A con.xml (no-windows !) $ fileset "status('0:1', '3:4', added())" .hgsub .hgsubstate 1k 2k b2link (no-windows !) bin c1 con.xml (no-windows !) tests with empty value ---------------------- Fully empty revset $ fileset "status('', '4', added())" hg: parse error: first argument to status must be a revision [255] $ fileset "status('2', '', added())" hg: parse error: second argument to status must be a revision [255] Empty revset will error at the revset layer $ fileset "status(' ', '4', added())" hg: parse error at 1: not a prefix: end [255] $ fileset "status('2', ' ', added())" hg: parse error at 1: not a prefix: end [255]