view tests/test-flagprocessor.t @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

# Create server
  $ hg init server
  $ cd server
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF
  $ cd ../

# Clone server and enable extensions
  $ hg clone -q server client
  $ cd client
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF

# Commit file that will trigger the noop extension
  $ echo '[NOOP]' > noop
  $ hg commit -Aqm "noop"

# Commit file that will trigger the base64 extension
  $ echo '[BASE64]' > base64
  $ hg commit -Aqm 'base64'

# Commit file that will trigger the gzip extension
  $ echo '[GZIP]' > gzip
  $ hg commit -Aqm 'gzip'

# Commit file that will trigger noop and base64
  $ echo '[NOOP][BASE64]' > noop-base64
  $ hg commit -Aqm 'noop+base64'

# Commit file that will trigger noop and gzip
  $ echo '[NOOP][GZIP]' > noop-gzip
  $ hg commit -Aqm 'noop+gzip'

# Commit file that will trigger base64 and gzip
  $ echo '[BASE64][GZIP]' > base64-gzip
  $ hg commit -Aqm 'base64+gzip'

# Commit file that will trigger base64, gzip and noop
  $ echo '[BASE64][GZIP][NOOP]' > base64-gzip-noop
  $ hg commit -Aqm 'base64+gzip+noop'

# TEST: ensure the revision data is consistent
  $ hg cat noop
  [NOOP]
  $ hg debugdata noop 0
  [NOOP]

  $ hg cat -r . base64
  [BASE64]
  $ hg debugdata base64 0
  W0JBU0U2NF0K (no-eol)

  $ hg cat -r . gzip
  [GZIP]
  $ hg debugdata gzip 0
  x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)

  $ hg cat -r . noop-base64
  [NOOP][BASE64]
  $ hg debugdata noop-base64 0
  W05PT1BdW0JBU0U2NF0K (no-eol)

  $ hg cat -r . noop-gzip
  [NOOP][GZIP]
  $ hg debugdata noop-gzip 0
  x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)

  $ hg cat -r . base64-gzip
  [BASE64][GZIP]
  $ hg debugdata base64-gzip 0
  eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)

  $ hg cat -r . base64-gzip-noop
  [BASE64][GZIP][NOOP]
  $ hg debugdata base64-gzip-noop 0
  eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)

# Push to the server
  $ hg push
  pushing to $TESTTMP/server
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 7 changesets with 7 changes to 7 files

# Initialize new client (not cloning) and setup extension
  $ cd ..
  $ hg init client2
  $ cd client2
  $ cat >> .hg/hgrc << EOF
  > [paths]
  > default = $TESTTMP/server
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF

# Pull from server and update to latest revision
  $ hg pull default
  pulling from $TESTTMP/server
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 7 changesets with 7 changes to 7 files
  new changesets 07b1b9442c5b:6e48f4215d24
  (run 'hg update' to get a working copy)
  $ hg update
  7 files updated, 0 files merged, 0 files removed, 0 files unresolved

# TEST: ensure the revision data is consistent
  $ hg cat noop
  [NOOP]
  $ hg debugdata noop 0
  [NOOP]

  $ hg cat -r . base64
  [BASE64]
  $ hg debugdata base64 0
  W0JBU0U2NF0K (no-eol)

  $ hg cat -r . gzip
  [GZIP]
  $ hg debugdata gzip 0
  x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)

  $ hg cat -r . noop-base64
  [NOOP][BASE64]
  $ hg debugdata noop-base64 0
  W05PT1BdW0JBU0U2NF0K (no-eol)

  $ hg cat -r . noop-gzip
  [NOOP][GZIP]
  $ hg debugdata noop-gzip 0
  x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)

  $ hg cat -r . base64-gzip
  [BASE64][GZIP]
  $ hg debugdata base64-gzip 0
  eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)

  $ hg cat -r . base64-gzip-noop
  [BASE64][GZIP][NOOP]
  $ hg debugdata base64-gzip-noop 0
  eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)

# TEST: ensure a missing processor is handled
  $ echo '[FAIL][BASE64][GZIP][NOOP]' > fail-base64-gzip-noop
  $ hg commit -Aqm 'fail+base64+gzip+noop'
  abort: missing processor for flag '0x1'!
  [255]
  $ rm fail-base64-gzip-noop

# TEST: ensure we cannot register several flag processors on the same flag
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > duplicate=$TESTDIR/flagprocessorext.py
  > EOF
  $ hg debugrebuilddirstate
  Traceback (most recent call last):
    File "*/mercurial/extensions.py", line *, in _runextsetup (glob)
      extsetup(ui)
    File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
      validatehash,
    File "*/mercurial/revlog.py", line *, in addflagprocessor (glob)
      raise error.Abort(msg)
  Abort: cannot register multiple processors on flag '0x8'.
  *** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
  $ hg st 2>&1 | egrep 'cannot register multiple processors|flagprocessorext'
    File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
  Abort: cannot register multiple processors on flag '0x8'.
  *** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
    File "*/tests/flagprocessorext.py", line *, in b64decode (glob)

  $ cd ..

# TEST: bundle repo
  $ hg init bundletest
  $ cd bundletest

  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > flagprocessor=$TESTDIR/flagprocessorext.py
  > EOF

  $ for i in 0 single two three 4; do
  >   echo '[BASE64]a-bit-longer-'$i > base64
  >   hg commit -m base64-$i -A base64
  > done

  $ hg update 2 -q
  $ echo '[BASE64]a-bit-longer-branching' > base64
  $ hg commit -q -m branching

  $ hg bundle --base 1 bundle.hg
  4 changesets found
  $ hg --config extensions.strip= strip -r 2 --no-backup --force -q
  $ hg -R bundle.hg log --stat -T '{rev} {desc}\n' base64
  5 branching
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  4 base64-4
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  3 base64-three
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  2 base64-two
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  1 base64-single
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  0 base64-0
   base64 |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  

  $ hg bundle -R bundle.hg --base 1 bundle-again.hg -q
  $ hg -R bundle-again.hg log --stat -T '{rev} {desc}\n' base64
  5 branching
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  4 base64-4
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  3 base64-three
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  2 base64-two
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  1 base64-single
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  0 base64-0
   base64 |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  
  $ rm bundle.hg bundle-again.hg

# TEST: hg status

  $ hg status
  $ hg diff