view tests/test-hgignore.t @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

  $ hg init ignorerepo
  $ cd ignorerepo

debugignore with no hgignore should be deterministic:
  $ hg debugignore
  <nevermatcher>

Issue562: .hgignore requires newline at end:

  $ touch foo
  $ touch bar
  $ touch baz
  $ cat > makeignore.py <<EOF
  > f = open(".hgignore", "w")
  > f.write("ignore\n")
  > f.write("foo\n")
  > # No EOL here
  > f.write("bar")
  > f.close()
  > EOF

  $ $PYTHON makeignore.py

Should display baz only:

  $ hg status
  ? baz

  $ rm foo bar baz .hgignore makeignore.py

  $ touch a.o
  $ touch a.c
  $ touch syntax
  $ mkdir dir
  $ touch dir/a.o
  $ touch dir/b.o
  $ touch dir/c.o

  $ hg add dir/a.o
  $ hg commit -m 0
  $ hg add dir/b.o

  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "*.o" > .hgignore
  $ hg status
  abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
  [255]

Ensure given files are relative to cwd

  $ echo "dir/.*\.o" > .hgignore
  $ hg status -i
  I dir/c.o

  $ hg debugignore dir/c.o dir/missing.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  dir/missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  $ cd dir
  $ hg debugignore c.o missing.o
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)

For icasefs, inexact matches also work, except for missing files

#if icasefs
  $ hg debugignore c.O missing.O
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.O is not ignored
#endif

  $ cd ..

  $ echo ".*\.o" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

Ensure that comments work:

  $ touch 'foo#bar' 'quux#'
#if no-windows
  $ touch 'baz\#wat'
#endif
  $ cat <<'EOF' >> .hgignore
  > # full-line comment
  >   # whitespace-only comment line
  > syntax# pattern, no whitespace, then comment
  > a.c  # pattern, then whitespace, then comment
  > baz\\# # escaped comment character
  > foo\#b # escaped comment character
  > quux\## escaped comment character at end of name
  > EOF
  $ hg status
  A dir/b.o
  ? .hgignore
  $ rm 'foo#bar' 'quux#'
#if no-windows
  $ rm 'baz\#wat'
#endif

Check that '^\.' does not ignore the root directory:

  $ echo "^\." > .hgignore
  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

Test that patterns from ui.ignore options are read:

  $ echo > .hgignore
  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
  > EOF
  $ echo "glob:**.o" > .hg/testhgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

empty out testhgignore
  $ echo > .hg/testhgignore

Test relative ignore path (issue4473):

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.relative = .hg/testhgignorerel
  > EOF
  $ echo "glob:*.o" > .hg/testhgignorerel
  $ cd dir
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ cd ..
  $ echo > .hg/testhgignorerel
  $ echo "syntax: glob" > .hgignore
  $ echo "re:.*\.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "syntax: invalid" > .hgignore
  $ hg status
  $TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid'
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "syntax: glob" > .hgignore
  $ echo "*.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "relglob:syntax*" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o

  $ echo "relglob:*" > .hgignore
  $ hg status
  A dir/b.o

  $ cd dir
  $ hg status .
  A b.o

  $ hg debugignore
  <includematcher includes='(?:(?:|.*/)[^/]*(?:/|$))'>

  $ hg debugignore b.o
  b.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)

  $ cd ..

Check patterns that match only the directory

"(fsmonitor !)" below assumes that fsmonitor is enabled with
"walk_on_invalidate = false" (default), which doesn't involve
re-walking whole repository at detection of .hgignore change.

  $ echo "^dir\$" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o (fsmonitor !)
  ? syntax

Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)

  $ echo "syntax: glob" > .hgignore
  $ echo "dir/**/c.o" >> .hgignore
  $ touch dir/c.o
  $ mkdir dir/subdir
  $ touch dir/subdir/c.o
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? syntax
  $ hg debugignore a.c
  a.c is not ignored
  $ hg debugignore dir/c.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)

Check using 'include:' in ignore file

  $ hg purge --all --config extensions.purge=
  $ touch foo.included

  $ echo ".*.included" > otherignore
  $ hg status -I "include:otherignore"
  ? foo.included

  $ echo "include:otherignore" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? otherignore

Check recursive uses of 'include:'

  $ echo "include:nested/ignore" >> otherignore
  $ mkdir nested
  $ echo "glob:*ignore" > nested/ignore
  $ hg status
  A dir/b.o

  $ cp otherignore goodignore
  $ echo "include:badignore" >> otherignore
  $ hg status
  skipping unreadable pattern file 'badignore': $ENOENT$
  A dir/b.o

  $ mv goodignore otherignore

Check using 'include:' while in a non-root directory

  $ cd ..
  $ hg -R ignorerepo status
  A dir/b.o
  $ cd ignorerepo

Check including subincludes

  $ hg revert -q --all
  $ hg purge --all --config extensions.purge=
  $ echo ".hgignore" > .hgignore
  $ mkdir dir1 dir2
  $ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
  $ echo "subinclude:dir2/.hgignore" >> .hgignore
  $ echo "glob:file*2" > dir2/.hgignore
  $ hg status
  ? dir1/file1
  ? dir1/file2
  ? dir2/file1

Check including subincludes with regexs

  $ echo "subinclude:dir1/.hgignore" >> .hgignore
  $ echo "regexp:f.le1" > dir1/.hgignore

  $ hg status
  ? dir1/file2
  ? dir2/file1

Check multiple levels of sub-ignores

  $ mkdir dir1/subdir
  $ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
  $ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
  $ echo "glob:subfil*3" >> dir1/subdir/.hgignore

  $ hg status
  ? dir1/file2
  ? dir1/subdir/subfile4
  ? dir2/file1

Check include subignore at the same level

  $ mv dir1/subdir/.hgignore dir1/.hgignoretwo
  $ echo "regexp:f.le1" > dir1/.hgignore
  $ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
  $ echo "glob:file*2" > dir1/.hgignoretwo

  $ hg status | grep file2
  [1]
  $ hg debugignore dir1/file2
  dir1/file2 is ignored
  (ignore rule in dir2/.hgignore, line 1: 'file*2')

#if windows

Windows paths are accepted on input

  $ rm dir1/.hgignore
  $ echo "dir1/file*" >> .hgignore
  $ hg debugignore "dir1\file2"
  dir1\file2 is ignored
  (ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
  $ hg up -qC .

#endif