view tests/test-http-protocol.t @ 35449:24528dba0e64

run-tests: add substitution patterns for common '\' path output on Windows

The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows.  Since the OS prints the proper paths everywhere else, this
is limited to Windows.  These are based on the check-code rules that were
dropped in 5feb782c7a95.

There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern.  End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.

The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group.  The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.

The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns.  There are probably others.

  $ cat >> $HGRCPATH << EOF
  > [web]
  > push_ssl = false
  > allow_push = *
  > EOF

  $ hg init server
  $ cd server
  $ touch a
  $ hg -q commit -A -m initial
  $ cd ..

  $ hg serve -R server -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS

compression formats are advertised in compression capability

#if zstd
  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities' | tr ' ' '\n' | grep '^compression=zstd,zlib$' > /dev/null
#else
  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities' | tr ' ' '\n' | grep '^compression=zlib$' > /dev/null
#endif

  $ killdaemons.py

server.compressionengines can replace engines list wholesale

  $ hg serve --config server.compressionengines=none -R server -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities' | tr ' ' '\n' | grep '^compression=none$' > /dev/null

  $ killdaemons.py

Order of engines can also change

  $ hg serve --config server.compressionengines=none,zlib -R server -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities' | tr ' ' '\n' | grep '^compression=none,zlib$' > /dev/null

  $ killdaemons.py

Start a default server again

  $ hg serve -R server -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

Server should send application/mercurial-0.1 to clients if no Accept is used

  $ get-with-headers.py --headeronly $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000' -
  200 Script output follows
  content-type: application/mercurial-0.1
  date: * (glob)
  server: * (glob)
  transfer-encoding: chunked

Server should send application/mercurial-0.1 when client says it wants it

  $ get-with-headers.py --hgproto '0.1' --headeronly $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000' -
  200 Script output follows
  content-type: application/mercurial-0.1
  date: * (glob)
  server: * (glob)
  transfer-encoding: chunked

Server should send application/mercurial-0.2 when client says it wants it

  $ get-with-headers.py --hgproto '0.2' --headeronly $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000' -
  200 Script output follows
  content-type: application/mercurial-0.2
  date: * (glob)
  server: * (glob)
  transfer-encoding: chunked

  $ get-with-headers.py --hgproto '0.1 0.2' --headeronly $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000' -
  200 Script output follows
  content-type: application/mercurial-0.2
  date: * (glob)
  server: * (glob)
  transfer-encoding: chunked

Requesting a compression format that server doesn't support results will fall back to 0.1

  $ get-with-headers.py --hgproto '0.2 comp=aa' --headeronly $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000' -
  200 Script output follows
  content-type: application/mercurial-0.1
  date: * (glob)
  server: * (glob)
  transfer-encoding: chunked

#if zstd
zstd is used if available

  $ get-with-headers.py --hgproto '0.2 comp=zstd' $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000' > resp
  $ f --size --hexdump --bytes 36 --sha1 resp
  resp: size=248, sha1=4d8d8f87fb82bd542ce52881fdc94f850748
  0000: 32 30 30 20 53 63 72 69 70 74 20 6f 75 74 70 75 |200 Script outpu|
  0010: 74 20 66 6f 6c 6c 6f 77 73 0a 0a 04 7a 73 74 64 |t follows...zstd|
  0020: 28 b5 2f fd                                     |(./.|

#endif

application/mercurial-0.2 is not yet used on non-streaming responses

  $ get-with-headers.py --hgproto '0.2' $LOCALIP:$HGPORT '?cmd=heads' -
  200 Script output follows
  content-length: 41
  content-type: application/mercurial-0.1
  date: * (glob)
  server: * (glob)
  
  e93700bd72895c5addab234c56d4024b487a362f

Now test protocol preference usage

  $ killdaemons.py
  $ hg serve --config server.compressionengines=none,zlib -R server -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

No Accept will send 0.1+zlib, even though "none" is preferred b/c "none" isn't supported on 0.1

  $ get-with-headers.py --headeronly $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000' Content-Type
  200 Script output follows
  content-type: application/mercurial-0.1

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000'  > resp
  $ f --size --hexdump --bytes 28 --sha1 resp
  resp: size=227, sha1=35a4c074da74f32f5440da3cbf04
  0000: 32 30 30 20 53 63 72 69 70 74 20 6f 75 74 70 75 |200 Script outpu|
  0010: 74 20 66 6f 6c 6c 6f 77 73 0a 0a 78             |t follows..x|

Explicit 0.1 will send zlib because "none" isn't supported on 0.1

  $ get-with-headers.py --hgproto '0.1' $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000'  > resp
  $ f --size --hexdump --bytes 28 --sha1 resp
  resp: size=227, sha1=35a4c074da74f32f5440da3cbf04
  0000: 32 30 30 20 53 63 72 69 70 74 20 6f 75 74 70 75 |200 Script outpu|
  0010: 74 20 66 6f 6c 6c 6f 77 73 0a 0a 78             |t follows..x|

0.2 with no compression will get "none" because that is server's preference
(spec says ZL and UN are implicitly supported)

  $ get-with-headers.py --hgproto '0.2' $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000'  > resp
  $ f --size --hexdump --bytes 32 --sha1 resp
  resp: size=432, sha1=ac931b412ec185a02e0e5bcff98dac83
  0000: 32 30 30 20 53 63 72 69 70 74 20 6f 75 74 70 75 |200 Script outpu|
  0010: 74 20 66 6f 6c 6c 6f 77 73 0a 0a 04 6e 6f 6e 65 |t follows...none|

Client receives server preference even if local order doesn't match

  $ get-with-headers.py --hgproto '0.2 comp=zlib,none' $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000'  > resp
  $ f --size --hexdump --bytes 32 --sha1 resp
  resp: size=432, sha1=ac931b412ec185a02e0e5bcff98dac83
  0000: 32 30 30 20 53 63 72 69 70 74 20 6f 75 74 70 75 |200 Script outpu|
  0010: 74 20 66 6f 6c 6c 6f 77 73 0a 0a 04 6e 6f 6e 65 |t follows...none|

Client receives only supported format even if not server preferred format

  $ get-with-headers.py --hgproto '0.2 comp=zlib' $LOCALIP:$HGPORT '?cmd=getbundle&heads=e93700bd72895c5addab234c56d4024b487a362f&common=0000000000000000000000000000000000000000'  > resp
  $ f --size --hexdump --bytes 33 --sha1 resp
  resp: size=232, sha1=a1c727f0c9693ca15742a75c30419bc36
  0000: 32 30 30 20 53 63 72 69 70 74 20 6f 75 74 70 75 |200 Script outpu|
  0010: 74 20 66 6f 6c 6c 6f 77 73 0a 0a 04 7a 6c 69 62 |t follows...zlib|
  0020: 78                                              |x|