Mercurial > hg
view tests/test-progress.t @ 35449:24528dba0e64
run-tests: add substitution patterns for common '\' path output on Windows
The goal is to reduce the amount of hand tuning of new/changed tests that is
required on Windows. Since the OS prints the proper paths everywhere else, this
is limited to Windows. These are based on the check-code rules that were
dropped in 5feb782c7a95.
There are some minor tweaks, because those were trying to detect '/' paths
without a '(glob)' at the end, whereas these detect '\' paths. Also, it looks
like the 'no changes made to subrepo' one was broke, because the path to the
subrepo has been getting output but was not in the pattern. End anchors are
dropped because '(glob)' is no longer required, but '(feature !)' annotations
are a possibility.
The 'saved backup bundle' pattern dropped from run-tests.py was simply carrying
over the first capture group. The replace() method runs prior to evaluating
'\1', but it wasn't doing anything because of the 'r' prefix on '\\'.
The 'not recording move' entry is new, because I stumbled upon it searching for
some of these patterns. There are probably others.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Tue, 12 Dec 2017 20:11:13 -0500 |
parents | 12b355964de8 |
children | 34592dd3bfa2 |
line wrap: on
line source
$ cat > loop.py <<EOF > from __future__ import absolute_import > import time > from mercurial import commands, registrar > > cmdtable = {} > command = registrar.command(cmdtable) > > class incrementingtime(object): > def __init__(self): > self._time = 0.0 > def __call__(self): > self._time += 0.25 > return self._time > time.time = incrementingtime() > > @command(b'loop', > [('', 'total', '', 'override for total'), > ('', 'nested', False, 'show nested results'), > ('', 'parallel', False, 'show parallel sets of results')], > 'hg loop LOOPS', > norepo=True) > def loop(ui, loops, **opts): > loops = int(loops) > total = None > if loops >= 0: > total = loops > if opts.get('total', None): > total = int(opts.get('total')) > nested = False > if opts.get('nested', None): > nested = True > loops = abs(loops) > > for i in range(loops): > ui.progress(topiclabel, i, getloopitem(i), 'loopnum', total) > if opts.get('parallel'): > ui.progress('other', i, 'other.%d' % i, 'othernum', total) > if nested: > nested_steps = 2 > if i and i % 4 == 0: > nested_steps = 5 > for j in range(nested_steps): > ui.progress( > 'nested', j, 'nested.%d' % j, 'nestnum', nested_steps) > ui.progress( > 'nested', None, 'nested.done', 'nestnum', nested_steps) > ui.progress(topiclabel, None, 'loop.done', 'loopnum', total) > > topiclabel = 'loop' > def getloopitem(i): > return 'loop.%d' % i > > EOF $ cp $HGRCPATH $HGRCPATH.orig $ echo "[extensions]" >> $HGRCPATH $ echo "progress=" >> $HGRCPATH $ echo "loop=`pwd`/loop.py" >> $HGRCPATH $ echo "[progress]" >> $HGRCPATH $ echo "format = topic bar number" >> $HGRCPATH $ echo "assume-tty=1" >> $HGRCPATH $ echo "width=60" >> $HGRCPATH test default params, display nothing because of delay $ hg -y loop 3 $ echo "delay=0" >> $HGRCPATH $ echo "refresh=0" >> $HGRCPATH test with delay=0, refresh=0 $ hg -y loop 3 \r (no-eol) (esc) loop [ ] 0/3\r (no-eol) (esc) loop [===============> ] 1/3\r (no-eol) (esc) loop [===============================> ] 2/3\r (no-eol) (esc) \r (no-eol) (esc) no progress with --quiet $ hg -y loop 3 --quiet test plain mode exception $ HGPLAINEXCEPT=progress hg -y loop 1 \r (no-eol) (esc) loop [ ] 0/1\r (no-eol) (esc) \r (no-eol) (esc) test nested short-lived topics (which shouldn't display with nestdelay): $ hg -y loop 3 --nested \r (no-eol) (esc) loop [ ] 0/3\r (no-eol) (esc) loop [===============> ] 1/3\r (no-eol) (esc) loop [===============================> ] 2/3\r (no-eol) (esc) \r (no-eol) (esc) Test nested long-lived topic which has the same name as a short-lived peer. We shouldn't get stuck showing the short-lived inner steps, and should go back to skipping the inner steps when the slow nested step finishes. $ hg -y loop 7 --nested \r (no-eol) (esc) loop [ ] 0/7\r (no-eol) (esc) loop [=====> ] 1/7\r (no-eol) (esc) loop [============> ] 2/7\r (no-eol) (esc) loop [===================> ] 3/7\r (no-eol) (esc) loop [==========================> ] 4/7\r (no-eol) (esc) nested [==========================> ] 3/5\r (no-eol) (esc) nested [===================================> ] 4/5\r (no-eol) (esc) loop [=================================> ] 5/7\r (no-eol) (esc) loop [========================================> ] 6/7\r (no-eol) (esc) \r (no-eol) (esc) $ hg --config progress.changedelay=0 -y loop 3 --nested \r (no-eol) (esc) loop [ ] 0/3\r (no-eol) (esc) nested [ ] 0/2\r (no-eol) (esc) nested [======================> ] 1/2\r (no-eol) (esc) loop [===============> ] 1/3\r (no-eol) (esc) nested [ ] 0/2\r (no-eol) (esc) nested [======================> ] 1/2\r (no-eol) (esc) loop [===============================> ] 2/3\r (no-eol) (esc) nested [ ] 0/2\r (no-eol) (esc) nested [======================> ] 1/2\r (no-eol) (esc) \r (no-eol) (esc) test two topics being printed in parallel (as when we're doing a local --pull clone, where you get the unbundle and bundle progress at the same time): $ hg loop 3 --parallel \r (no-eol) (esc) loop [ ] 0/3\r (no-eol) (esc) loop [===============> ] 1/3\r (no-eol) (esc) loop [===============================> ] 2/3\r (no-eol) (esc) \r (no-eol) (esc) test refresh is taken in account $ hg -y --config progress.refresh=100 loop 3 test format options 1 $ hg -y --config 'progress.format=number topic item+2' loop 2 \r (no-eol) (esc) 0/2 loop lo\r (no-eol) (esc) 1/2 loop lo\r (no-eol) (esc) \r (no-eol) (esc) test format options 2 $ hg -y --config 'progress.format=number item-3 bar' loop 2 \r (no-eol) (esc) 0/2 p.0 [ ]\r (no-eol) (esc) 1/2 p.1 [=======================> ]\r (no-eol) (esc) \r (no-eol) (esc) test format options and indeterminate progress $ hg -y --config 'progress.format=number item bar' loop -- -2 \r (no-eol) (esc) 0 loop.0 [ <=> ]\r (no-eol) (esc) 1 loop.1 [ <=> ]\r (no-eol) (esc) \r (no-eol) (esc) make sure things don't fall over if count > total $ hg -y loop --total 4 6 \r (no-eol) (esc) loop [ ] 0/4\r (no-eol) (esc) loop [===========> ] 1/4\r (no-eol) (esc) loop [=======================> ] 2/4\r (no-eol) (esc) loop [===================================> ] 3/4\r (no-eol) (esc) loop [===============================================>] 4/4\r (no-eol) (esc) loop [ <=> ] 5/4\r (no-eol) (esc) \r (no-eol) (esc) test immediate progress completion $ hg -y loop 0 test delay time estimates #if no-chg $ cp $HGRCPATH.orig $HGRCPATH $ echo "[extensions]" >> $HGRCPATH $ echo "mocktime=$TESTDIR/mocktime.py" >> $HGRCPATH $ echo "progress=" >> $HGRCPATH $ echo "loop=`pwd`/loop.py" >> $HGRCPATH $ echo "[progress]" >> $HGRCPATH $ echo "assume-tty=1" >> $HGRCPATH $ echo "delay=25" >> $HGRCPATH $ echo "width=60" >> $HGRCPATH $ MOCKTIME=11 hg -y loop 8 \r (no-eol) (esc) loop [=========> ] 2/8 1m07s\r (no-eol) (esc) loop [===============> ] 3/8 56s\r (no-eol) (esc) loop [=====================> ] 4/8 45s\r (no-eol) (esc) loop [==========================> ] 5/8 34s\r (no-eol) (esc) loop [================================> ] 6/8 23s\r (no-eol) (esc) loop [=====================================> ] 7/8 12s\r (no-eol) (esc) \r (no-eol) (esc) $ MOCKTIME=10000 hg -y loop 4 \r (no-eol) (esc) loop [ ] 0/4\r (no-eol) (esc) loop [=========> ] 1/4 8h21m\r (no-eol) (esc) loop [====================> ] 2/4 5h34m\r (no-eol) (esc) loop [==============================> ] 3/4 2h47m\r (no-eol) (esc) \r (no-eol) (esc) $ MOCKTIME=1000000 hg -y loop 4 \r (no-eol) (esc) loop [ ] 0/4\r (no-eol) (esc) loop [=========> ] 1/4 5w00d\r (no-eol) (esc) loop [====================> ] 2/4 3w03d\r (no-eol) (esc) loop [=============================> ] 3/4 11d14h\r (no-eol) (esc) \r (no-eol) (esc) $ MOCKTIME=14000000 hg -y loop 4 \r (no-eol) (esc) loop [ ] 0/4\r (no-eol) (esc) loop [=========> ] 1/4 1y18w\r (no-eol) (esc) loop [===================> ] 2/4 46w03d\r (no-eol) (esc) loop [=============================> ] 3/4 23w02d\r (no-eol) (esc) \r (no-eol) (esc) Non-linear progress: $ MOCKTIME='20 20 20 20 20 20 20 20 20 20 500 500 500 500 500 20 20 20 20 20' hg -y loop 20 \r (no-eol) (esc) loop [=> ] 1/20 6m21s\r (no-eol) (esc) loop [===> ] 2/20 6m01s\r (no-eol) (esc) loop [=====> ] 3/20 5m41s\r (no-eol) (esc) loop [=======> ] 4/20 5m21s\r (no-eol) (esc) loop [=========> ] 5/20 5m01s\r (no-eol) (esc) loop [===========> ] 6/20 4m41s\r (no-eol) (esc) loop [=============> ] 7/20 4m21s\r (no-eol) (esc) loop [===============> ] 8/20 4m01s\r (no-eol) (esc) loop [================> ] 9/20 25m40s\r (no-eol) (esc) loop [===================> ] 10/20 1h06m\r (no-eol) (esc) loop [=====================> ] 11/20 1h13m\r (no-eol) (esc) loop [=======================> ] 12/20 1h07m\r (no-eol) (esc) loop [========================> ] 13/20 58m19s\r (no-eol) (esc) loop [===========================> ] 14/20 7m09s\r (no-eol) (esc) loop [=============================> ] 15/20 3m38s\r (no-eol) (esc) loop [===============================> ] 16/20 2m15s\r (no-eol) (esc) loop [=================================> ] 17/20 1m27s\r (no-eol) (esc) loop [====================================> ] 18/20 52s\r (no-eol) (esc) loop [======================================> ] 19/20 25s\r (no-eol) (esc) \r (no-eol) (esc) Time estimates should not fail when there's no end point: $ MOCKTIME=11 hg -y loop -- -4 \r (no-eol) (esc) loop [ <=> ] 2\r (no-eol) (esc) loop [ <=> ] 3\r (no-eol) (esc) \r (no-eol) (esc) #endif test line trimming by '[progress] width', when progress topic contains multi-byte characters, of which length of byte sequence and columns in display are different from each other. $ cp $HGRCPATH.orig $HGRCPATH $ cat >> $HGRCPATH <<EOF > [extensions] > progress= > loop=`pwd`/loop.py > [progress] > assume-tty = 1 > delay = 0 > refresh = 0 > EOF $ rm -f loop.pyc $ cat >> loop.py <<EOF > # use non-ascii characters as topic label of progress > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes > topiclabel = u'\u3042\u3044\u3046\u3048'.encode('utf-8') > EOF $ cat >> $HGRCPATH <<EOF > [progress] > format = topic number > width= 12 > EOF $ hg --encoding utf-8 -y loop --total 3 3 \r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 0/3\r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 1/3\r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 2/3\r (no-eol) (esc) \r (no-eol) (esc) test calculation of bar width, when progress topic contains multi-byte characters, of which length of byte sequence and columns in display are different from each other. $ cat >> $HGRCPATH <<EOF > [progress] > format = topic bar > width= 21 > # progwidth should be 9 (= 21 - (8+1) - 3) > EOF $ hg --encoding utf-8 -y loop --total 3 3 \r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [ ]\r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [==> ]\r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [=====> ]\r (no-eol) (esc) \r (no-eol) (esc) test trimming progress items, when they contain multi-byte characters, of which length of byte sequence and columns in display are different from each other. $ rm -f loop.pyc $ rm -Rf __pycache__ $ cat >> loop.py <<EOF > # use non-ascii characters as loop items of progress > loopitems = [ > u'\u3042\u3044'.encode('utf-8'), # 2 x 2 = 4 columns > u'\u3042\u3044\u3046'.encode('utf-8'), # 2 x 3 = 6 columns > u'\u3042\u3044\u3046\u3048'.encode('utf-8'), # 2 x 4 = 8 columns > ] > def getloopitem(i): > return loopitems[i % len(loopitems)] > EOF $ cat >> $HGRCPATH <<EOF > [progress] > # trim at tail side > format = item+6 > EOF $ hg --encoding utf-8 -y loop --total 3 3 \r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84 \r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc) \r (no-eol) (esc) $ cat >> $HGRCPATH <<EOF > [progress] > # trim at left side > format = item-6 > EOF $ hg --encoding utf-8 -y loop --total 3 3 \r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84 \r (no-eol) (esc) \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc) \xe3\x81\x84\xe3\x81\x86\xe3\x81\x88\r (no-eol) (esc) \r (no-eol) (esc)