run-tests: alias hg to hg.exe on Windows
To enable legacy stdio mode on Windows, hg.exe needs to be updated. But before
that, we actually have to use it when running the tests. I *think* what was
happening before was when MSYS invoked `hg`, it looked at the shbang line and
ran python.exe found there. The test harness must be updating $PATH to include
the python used to launch it, and therefore it ran py3. As a side note, this
also fixed `py -3 run-tests.py` (without --local), which complained about the
space in the shbang line before this.
This should also help in WSL, because the explicit '.exe' is needed to invoke a
Windows app instead of invoking the Linux app.
I have no idea why this change capitalizes Lib in the tests, as it was
previously lowercase for both py2 and py3.
hg debuginstall
$ hg debuginstall
checking encoding (ascii)...
checking Python executable (*) (glob)
checking Python version (2.*) (glob) (no-py3 !)
checking Python version (3.*) (glob) (py3 !)
checking Python lib (.*[Ll]ib.*)... (re)
checking Python security support (*) (glob)
TLS 1.2 not supported by Python install; network connections lack modern security (?)
SNI not supported by Python install; may have connectivity issues with some servers (?)
checking Mercurial version (*) (glob)
checking Mercurial custom build (*) (glob)
checking module policy (*) (glob)
checking installed modules (*mercurial)... (glob)
checking registered compression engines (*zlib*) (glob)
checking available compression engines (*zlib*) (glob)
checking available compression engines for wire protocol (*zlib*) (glob)
checking "re2" regexp engine \((available|missing)\) (re)
checking templates (*mercurial?templates)... (glob)
checking default template (*mercurial?templates?map-cmdline.default) (glob)
checking commit editor... (*) (glob)
checking username (test)
no problems detected
hg debuginstall JSON
$ hg debuginstall -Tjson | sed 's|\\\\|\\|g'
[
{
"compengines": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
"compenginesavail": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
"compenginesserver": [*"zlib"*], (glob)
"defaulttemplate": "*mercurial?templates?map-cmdline.default", (glob)
"defaulttemplateerror": null,
"defaulttemplatenotfound": "default",
"editor": "*", (glob)
"editornotfound": false,
"encoding": "ascii",
"encodingerror": null,
"extensionserror": null, (no-pure !)
"hgmodulepolicy": "*", (glob)
"hgmodules": "*mercurial", (glob)
"hgver": "*", (glob)
"hgverextra": "*", (glob)
"problems": 0,
"pythonexe": "*", (glob)
"pythonlib": "*", (glob)
"pythonsecurity": [*], (glob)
"pythonver": "*.*.*", (glob)
"re2": (true|false), (re)
"templatedirs": "*mercurial?templates", (glob)
"username": "test",
"usernameerror": null,
"vinotfound": false
}
]
hg debuginstall with no username
$ HGUSER= hg debuginstall
checking encoding (ascii)...
checking Python executable (*) (glob)
checking Python version (2.*) (glob) (no-py3 !)
checking Python version (3.*) (glob) (py3 !)
checking Python lib (.*[Ll]ib.*)... (re)
checking Python security support (*) (glob)
TLS 1.2 not supported by Python install; network connections lack modern security (?)
SNI not supported by Python install; may have connectivity issues with some servers (?)
checking Mercurial version (*) (glob)
checking Mercurial custom build (*) (glob)
checking module policy (*) (glob)
checking installed modules (*mercurial)... (glob)
checking registered compression engines (*zlib*) (glob)
checking available compression engines (*zlib*) (glob)
checking available compression engines for wire protocol (*zlib*) (glob)
checking "re2" regexp engine \((available|missing)\) (re)
checking templates (*mercurial?templates)... (glob)
checking default template (*mercurial?templates?map-cmdline.default) (glob)
checking commit editor... (*) (glob)
checking username...
no username supplied
(specify a username in your configuration file)
1 problems detected, please check your install!
[1]
hg debuginstall with invalid encoding
$ HGENCODING=invalidenc hg debuginstall | grep encoding
checking encoding (invalidenc)...
unknown encoding: invalidenc
exception message in JSON
$ HGENCODING=invalidenc HGUSER= hg debuginstall -Tjson | grep error
"defaulttemplateerror": null,
"encodingerror": "unknown encoding: invalidenc",
"extensionserror": null, (no-pure !)
"usernameerror": "no username supplied",
path variables are expanded (~ is the same as $TESTTMP)
$ mkdir tools
$ touch tools/testeditor.exe
#if execbit
$ chmod 755 tools/testeditor.exe
#endif
$ HGEDITOR="~/tools/testeditor.exe" hg debuginstall
checking encoding (ascii)...
checking Python executable (*) (glob)
checking Python version (2.*) (glob) (no-py3 !)
checking Python version (3.*) (glob) (py3 !)
checking Python lib (.*[Ll]ib.*)... (re)
checking Python security support (*) (glob)
TLS 1.2 not supported by Python install; network connections lack modern security (?)
SNI not supported by Python install; may have connectivity issues with some servers (?)
checking Mercurial version (*) (glob)
checking Mercurial custom build (*) (glob)
checking module policy (*) (glob)
checking installed modules (*mercurial)... (glob)
checking registered compression engines (*zlib*) (glob)
checking available compression engines (*zlib*) (glob)
checking available compression engines for wire protocol (*zlib*) (glob)
checking "re2" regexp engine \((available|missing)\) (re)
checking templates (*mercurial?templates)... (glob)
checking default template (*mercurial?templates?map-cmdline.default) (glob)
checking commit editor... ($TESTTMP/tools/testeditor.exe)
checking username (test)
no problems detected
print out the binary post-shlexsplit in the error message when commit editor is
not found (this is intentionally using backslashes to mimic a windows usecase).
$ HGEDITOR="c:\foo\bar\baz.exe -y -z" hg debuginstall
checking encoding (ascii)...
checking Python executable (*) (glob)
checking Python version (2.*) (glob) (no-py3 !)
checking Python version (3.*) (glob) (py3 !)
checking Python lib (.*[Ll]ib.*)... (re)
checking Python security support (*) (glob)
TLS 1.2 not supported by Python install; network connections lack modern security (?)
SNI not supported by Python install; may have connectivity issues with some servers (?)
checking Mercurial version (*) (glob)
checking Mercurial custom build (*) (glob)
checking module policy (*) (glob)
checking installed modules (*mercurial)... (glob)
checking registered compression engines (*zlib*) (glob)
checking available compression engines (*zlib*) (glob)
checking available compression engines for wire protocol (*zlib*) (glob)
checking "re2" regexp engine \((available|missing)\) (re)
checking templates (*mercurial?templates)... (glob)
checking default template (*mercurial?templates?map-cmdline.default) (glob)
checking commit editor... (c:\foo\bar\baz.exe) (windows !)
Can't find editor 'c:\foo\bar\baz.exe' in PATH (windows !)
checking commit editor... (c:foobarbaz.exe) (no-windows !)
Can't find editor 'c:foobarbaz.exe' in PATH (no-windows !)
(specify a commit editor in your configuration file)
checking username (test)
1 problems detected, please check your install!
[1]
#if test-repo
$ . "$TESTDIR/helpers-testrepo.sh"
$ cat >> wixxml.py << EOF
> import os
> import subprocess
> import sys
> import xml.etree.ElementTree as ET
>
> # MSYS mangles the path if it expands $TESTDIR
> testdir = os.environ['TESTDIR']
> ns = {'wix' : 'http://schemas.microsoft.com/wix/2006/wi'}
>
> def directory(node, relpath):
> '''generator of files in the xml node, rooted at relpath'''
> dirs = node.findall('./{%(wix)s}Directory' % ns)
>
> for d in dirs:
> for subfile in directory(d, relpath + d.attrib['Name'] + '/'):
> yield subfile
>
> files = node.findall('./{%(wix)s}Component/{%(wix)s}File' % ns)
>
> for f in files:
> yield relpath + f.attrib['Name']
>
> def hgdirectory(relpath):
> '''generator of tracked files, rooted at relpath'''
> hgdir = "%s/../mercurial" % (testdir)
> args = ['hg', '--cwd', hgdir, 'files', relpath]
> proc = subprocess.Popen(args, stdout=subprocess.PIPE,
> stderr=subprocess.PIPE)
> output = proc.communicate()[0]
>
> slash = '/'
> for line in output.splitlines():
> if os.name == 'nt':
> yield line.replace(os.sep, slash)
> else:
> yield line
>
> tracked = [f for f in hgdirectory(sys.argv[1])]
>
> xml = ET.parse("%s/../contrib/wix/%s.wxs" % (testdir, sys.argv[1]))
> root = xml.getroot()
> dir = root.find('.//{%(wix)s}DirectoryRef' % ns)
>
> installed = [f for f in directory(dir, '')]
>
> print('Not installed:')
> for f in sorted(set(tracked) - set(installed)):
> print(' %s' % f)
>
> print('Not tracked:')
> for f in sorted(set(installed) - set(tracked)):
> print(' %s' % f)
> EOF
$ ( testrepohgenv; "$PYTHON" wixxml.py help )
Not installed:
help/common.txt
help/hg-ssh.8.txt
help/hg.1.txt
help/hgignore.5.txt
help/hgrc.5.txt
Not tracked:
$ ( testrepohgenv; "$PYTHON" wixxml.py templates )
Not installed:
Not tracked:
#endif
#if virtualenv
Verify that Mercurial is installable with pip. Note that this MUST be
the last test in this file, because we do some nasty things to the
shell environment in order to make the virtualenv work reliably.
$ cd $TESTTMP
Note: --no-site-packages is deprecated, but some places have an
ancient virtualenv from their linux distro or similar and it's not yet
the default for them.
$ unset PYTHONPATH
$ "$PYTHON" -m virtualenv --no-site-packages --never-download installenv >> pip.log
Note: we use this weird path to run pip and hg to avoid platform differences,
since it's bin on most platforms but Scripts on Windows.
$ ./installenv/*/pip install --no-index $TESTDIR/.. >> pip.log
$ ./installenv/*/hg debuginstall || cat pip.log
checking encoding (ascii)...
checking Python executable (*) (glob)
checking Python version (2.*) (glob) (no-py3 !)
checking Python version (3.*) (glob) (py3 !)
checking Python lib (*)... (glob)
checking Python security support (*) (glob)
TLS 1.2 not supported by Python install; network connections lack modern security (?)
SNI not supported by Python install; may have connectivity issues with some servers (?)
checking Mercurial version (*) (glob)
checking Mercurial custom build (*) (glob)
checking module policy (*) (glob)
checking installed modules (*/mercurial)... (glob)
checking registered compression engines (*) (glob)
checking available compression engines (*) (glob)
checking available compression engines for wire protocol (*) (glob)
checking "re2" regexp engine \((available|missing)\) (re)
checking templates ($TESTTMP/installenv/*/site-packages/mercurial/templates)... (glob)
checking default template ($TESTTMP/installenv/*/site-packages/mercurial/templates/map-cmdline.default) (glob)
checking commit editor... (*) (glob)
checking username (test)
no problems detected
#endif