Mercurial > hg
view hgext/graphlog.py @ 14133:28085b82f801
graphlog: always sort revisions topologically
The grapher cannot really handled revisions if they are not emitted in
topological order. The previous 'reverse()' revset was not enough to achieve
that and was replaced by an explicit sort call for simplicity. The --limit
option is now also handled as usual with cmdutil.loglimit() instead of a
'limit' revset.
author | Patrick Mezard <pmezard@gmail.com> |
---|---|
date | Sun, 01 May 2011 15:51:52 +0200 |
parents | 7d3bd0640262 |
children | 4e5a36eeefd1 |
line wrap: on
line source
# ASCII graph log extension for Mercurial # # Copyright 2007 Joel Rosdahl <joel@rosdahl.net> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. '''command to view revision graphs from a shell This extension adds a --graph option to the incoming, outgoing and log commands. When this options is given, an ASCII representation of the revision graph is also shown. ''' from mercurial.cmdutil import revrange, show_changeset from mercurial.commands import templateopts from mercurial.i18n import _ from mercurial.node import nullrev from mercurial import cmdutil, commands, extensions from mercurial import hg, scmutil, util, graphmod ASCIIDATA = 'ASC' def asciiedges(type, char, lines, seen, rev, parents): """adds edge info to changelog DAG walk suitable for ascii()""" if rev not in seen: seen.append(rev) nodeidx = seen.index(rev) knownparents = [] newparents = [] for parent in parents: if parent in seen: knownparents.append(parent) else: newparents.append(parent) ncols = len(seen) nextseen = seen[:] nextseen[nodeidx:nodeidx + 1] = newparents edges = [(nodeidx, nextseen.index(p)) for p in knownparents] while len(newparents) > 2: # ascii() only knows how to add or remove a single column between two # calls. Nodes with more than two parents break this constraint so we # introduce intermediate expansion lines to grow the active node list # slowly. edges.append((nodeidx, nodeidx)) edges.append((nodeidx, nodeidx + 1)) nmorecols = 1 yield (type, char, lines, (nodeidx, edges, ncols, nmorecols)) char = '\\' lines = [] nodeidx += 1 ncols += 1 edges = [] del newparents[0] if len(newparents) > 0: edges.append((nodeidx, nodeidx)) if len(newparents) > 1: edges.append((nodeidx, nodeidx + 1)) nmorecols = len(nextseen) - ncols seen[:] = nextseen yield (type, char, lines, (nodeidx, edges, ncols, nmorecols)) def fix_long_right_edges(edges): for (i, (start, end)) in enumerate(edges): if end > start: edges[i] = (start, end + 1) def get_nodeline_edges_tail( node_index, p_node_index, n_columns, n_columns_diff, p_diff, fix_tail): if fix_tail and n_columns_diff == p_diff and n_columns_diff != 0: # Still going in the same non-vertical direction. if n_columns_diff == -1: start = max(node_index + 1, p_node_index) tail = ["|", " "] * (start - node_index - 1) tail.extend(["/", " "] * (n_columns - start)) return tail else: return ["\\", " "] * (n_columns - node_index - 1) else: return ["|", " "] * (n_columns - node_index - 1) def draw_edges(edges, nodeline, interline): for (start, end) in edges: if start == end + 1: interline[2 * end + 1] = "/" elif start == end - 1: interline[2 * start + 1] = "\\" elif start == end: interline[2 * start] = "|" else: nodeline[2 * end] = "+" if start > end: (start, end) = (end, start) for i in range(2 * start + 1, 2 * end): if nodeline[i] != "+": nodeline[i] = "-" def get_padding_line(ni, n_columns, edges): line = [] line.extend(["|", " "] * ni) if (ni, ni - 1) in edges or (ni, ni) in edges: # (ni, ni - 1) (ni, ni) # | | | | | | | | # +---o | | o---+ # | | c | | c | | # | |/ / | |/ / # | | | | | | c = "|" else: c = " " line.extend([c, " "]) line.extend(["|", " "] * (n_columns - ni - 1)) return line def asciistate(): """returns the initial value for the "state" argument to ascii()""" return [0, 0] def ascii(ui, state, type, char, text, coldata): """prints an ASCII graph of the DAG takes the following arguments (one call per node in the graph): - ui to write to - Somewhere to keep the needed state in (init to asciistate()) - Column of the current node in the set of ongoing edges. - Type indicator of node data == ASCIIDATA. - Payload: (char, lines): - Character to use as node's symbol. - List of lines to display as the node's text. - Edges; a list of (col, next_col) indicating the edges between the current node and its parents. - Number of columns (ongoing edges) in the current revision. - The difference between the number of columns (ongoing edges) in the next revision and the number of columns (ongoing edges) in the current revision. That is: -1 means one column removed; 0 means no columns added or removed; 1 means one column added. """ idx, edges, ncols, coldiff = coldata assert -2 < coldiff < 2 if coldiff == -1: # Transform # # | | | | | | # o | | into o---+ # |X / |/ / # | | | | fix_long_right_edges(edges) # add_padding_line says whether to rewrite # # | | | | | | | | # | o---+ into | o---+ # | / / | | | # <--- padding line # o | | | / / # o | | add_padding_line = (len(text) > 2 and coldiff == -1 and [x for (x, y) in edges if x + 1 < y]) # fix_nodeline_tail says whether to rewrite # # | | o | | | | o | | # | | |/ / | | |/ / # | o | | into | o / / # <--- fixed nodeline tail # | |/ / | |/ / # o | | o | | fix_nodeline_tail = len(text) <= 2 and not add_padding_line # nodeline is the line containing the node character (typically o) nodeline = ["|", " "] * idx nodeline.extend([char, " "]) nodeline.extend( get_nodeline_edges_tail(idx, state[1], ncols, coldiff, state[0], fix_nodeline_tail)) # shift_interline is the line containing the non-vertical # edges between this entry and the next shift_interline = ["|", " "] * idx if coldiff == -1: n_spaces = 1 edge_ch = "/" elif coldiff == 0: n_spaces = 2 edge_ch = "|" else: n_spaces = 3 edge_ch = "\\" shift_interline.extend(n_spaces * [" "]) shift_interline.extend([edge_ch, " "] * (ncols - idx - 1)) # draw edges from the current node to its parents draw_edges(edges, nodeline, shift_interline) # lines is the list of all graph lines to print lines = [nodeline] if add_padding_line: lines.append(get_padding_line(idx, ncols, edges)) lines.append(shift_interline) # make sure that there are as many graph lines as there are # log strings while len(text) < len(lines): text.append("") if len(lines) < len(text): extra_interline = ["|", " "] * (ncols + coldiff) while len(lines) < len(text): lines.append(extra_interline) # print lines indentation_level = max(ncols, ncols + coldiff) for (line, logstr) in zip(lines, text): ln = "%-*s %s" % (2 * indentation_level, "".join(line), logstr) ui.write(ln.rstrip() + '\n') # ... and start over state[0] = coldiff state[1] = idx def get_revs(repo, rev_opt): if rev_opt: revs = revrange(repo, rev_opt) if len(revs) == 0: return (nullrev, nullrev) return (max(revs), min(revs)) else: return (len(repo) - 1, 0) def check_unsupported_flags(pats, opts): for op in ["follow_first", "copies", "newest_first"]: if op in opts and opts[op]: raise util.Abort(_("-G/--graph option is incompatible with --%s") % op.replace("_", "-")) if pats and opts.get('follow'): raise util.Abort(_("-G/--graph option is incompatible with --follow " "with file argument")) def revset(pats, opts): """Return revset str built of revisions, log options and file patterns. """ opt2revset = { 'follow': (0, 'follow()'), 'no_merges': (0, 'not merge()'), 'only_merges': (0, 'merge()'), 'removed': (0, 'removes("*")'), 'date': (1, 'date($)'), 'branch': (2, 'branch($)'), 'exclude': (2, 'not file($)'), 'include': (2, 'file($)'), 'keyword': (2, 'keyword($)'), 'only_branch': (2, 'branch($)'), 'prune': (2, 'not ($ or ancestors($))'), 'user': (2, 'user($)'), } optrevset = [] revset = [] for op, val in opts.iteritems(): if not val: continue if op == 'rev': # Already a revset revset.extend(val) if op not in opt2revset: continue arity, revop = opt2revset[op] revop = revop.replace('$', '%(val)r') if arity == 0: optrevset.append(revop) elif arity == 1: optrevset.append(revop % {'val': val}) else: for f in val: optrevset.append(revop % {'val': f}) for path in pats: optrevset.append('file(%r)' % path) if revset or optrevset: if revset: revset = ['(' + ' or '.join(revset) + ')'] if optrevset: revset.append('(' + ' and '.join(optrevset) + ')') revset = ' and '.join(revset) else: revset = 'all()' return revset def generate(ui, dag, displayer, showparents, edgefn): seen, state = [], asciistate() for rev, type, ctx, parents in dag: char = ctx.node() in showparents and '@' or 'o' displayer.show(ctx) lines = displayer.hunk.pop(rev).split('\n')[:-1] displayer.flush(rev) edges = edgefn(type, char, lines, seen, rev, parents) for type, char, lines, coldata in edges: ascii(ui, state, type, char, lines, coldata) displayer.close() def graphlog(ui, repo, *pats, **opts): """show revision history alongside an ASCII revision graph Print a revision history alongside a revision graph drawn with ASCII characters. Nodes printed as an @ character are parents of the working directory. """ check_unsupported_flags(pats, opts) revs = sorted(revrange(repo, [revset(pats, opts)]), reverse=1) limit = cmdutil.loglimit(opts) if limit is not None: revs = revs[:limit] revdag = graphmod.dagwalker(repo, revs) displayer = show_changeset(ui, repo, opts, buffered=True) showparents = [ctx.node() for ctx in repo[None].parents()] generate(ui, revdag, displayer, showparents, asciiedges) def graphrevs(repo, nodes, opts): limit = cmdutil.loglimit(opts) nodes.reverse() if limit is not None: nodes = nodes[:limit] return graphmod.nodes(repo, nodes) def goutgoing(ui, repo, dest=None, **opts): """show the outgoing changesets alongside an ASCII revision graph Print the outgoing changesets alongside a revision graph drawn with ASCII characters. Nodes printed as an @ character are parents of the working directory. """ check_unsupported_flags([], opts) o = hg._outgoing(ui, repo, dest, opts) if o is None: return revdag = graphrevs(repo, o, opts) displayer = show_changeset(ui, repo, opts, buffered=True) showparents = [ctx.node() for ctx in repo[None].parents()] generate(ui, revdag, displayer, showparents, asciiedges) def gincoming(ui, repo, source="default", **opts): """show the incoming changesets alongside an ASCII revision graph Print the incoming changesets alongside a revision graph drawn with ASCII characters. Nodes printed as an @ character are parents of the working directory. """ def subreporecurse(): return 1 check_unsupported_flags([], opts) def display(other, chlist, displayer): revdag = graphrevs(other, chlist, opts) showparents = [ctx.node() for ctx in repo[None].parents()] generate(ui, revdag, displayer, showparents, asciiedges) hg._incoming(display, subreporecurse, ui, repo, source, opts, buffered=True) def uisetup(ui): '''Initialize the extension.''' _wrapcmd(ui, 'log', commands.table, graphlog) _wrapcmd(ui, 'incoming', commands.table, gincoming) _wrapcmd(ui, 'outgoing', commands.table, goutgoing) def _wrapcmd(ui, cmd, table, wrapfn): '''wrap the command''' def graph(orig, *args, **kwargs): if kwargs['graph']: return wrapfn(*args, **kwargs) return orig(*args, **kwargs) entry = extensions.wrapcommand(table, cmd, graph) entry[1].append(('G', 'graph', None, _("show the revision DAG"))) cmdtable = { "glog": (graphlog, [('l', 'limit', '', _('limit number of changes displayed'), _('NUM')), ('p', 'patch', False, _('show patch')), ('r', 'rev', [], _('show the specified revision or range'), _('REV')), ] + templateopts, _('hg glog [OPTION]... [FILE]')), }