Mercurial > hg
view hgext/sparse.py @ 33349:28f75a1695fb
histedit: pass multiple nodes to strip (BC)
Previously, histedit.cleanupnode pass root nodes one by one. Since
repair.strip takes multiple nodes and can handle them just fine, pass all
strip roots at once.
This is BC because the number of strip backup files may change from N to 1.
author | Jun Wu <quark@fb.com> |
---|---|
date | Sat, 08 Jul 2017 16:50:31 -0700 |
parents | 33d0859c37bd |
children | 160efb559f67 |
line wrap: on
line source
# sparse.py - allow sparse checkouts of the working directory # # Copyright 2014 Facebook, Inc. # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. """allow sparse checkouts of the working directory (EXPERIMENTAL) (This extension is not yet protected by backwards compatibility guarantees. Any aspect may break in future releases until this notice is removed.) This extension allows the working directory to only consist of a subset of files for the revision. This allows specific files or directories to be explicitly included or excluded. Many repository operations have performance proportional to the number of files in the working directory. So only realizing a subset of files in the working directory can improve performance. Sparse Config Files ------------------- The set of files that are part of a sparse checkout are defined by a sparse config file. The file defines 3 things: includes (files to include in the sparse checkout), excludes (files to exclude from the sparse checkout), and profiles (links to other config files). The file format is newline delimited. Empty lines and lines beginning with ``#`` are ignored. Lines beginning with ``%include `` denote another sparse config file to include. e.g. ``%include tests.sparse``. The filename is relative to the repository root. The special lines ``[include]`` and ``[exclude]`` denote the section for includes and excludes that follow, respectively. It is illegal to have ``[include]`` after ``[exclude]``. If no sections are defined, entries are assumed to be in the ``[include]`` section. Non-special lines resemble file patterns to be added to either includes or excludes. The syntax of these lines is documented by :hg:`help patterns`. Patterns are interpreted as ``glob:`` by default and match against the root of the repository. Exclusion patterns take precedence over inclusion patterns. So even if a file is explicitly included, an ``[exclude]`` entry can remove it. For example, say you have a repository with 3 directories, ``frontend/``, ``backend/``, and ``tools/``. ``frontend/`` and ``backend/`` correspond to different projects and it is uncommon for someone working on one to need the files for the other. But ``tools/`` contains files shared between both projects. Your sparse config files may resemble:: # frontend.sparse frontend/** tools/** # backend.sparse backend/** tools/** Say the backend grows in size. Or there's a directory with thousands of files you wish to exclude. You can modify the profile to exclude certain files:: [include] backend/** tools/** [exclude] tools/tests/** """ from __future__ import absolute_import from mercurial.i18n import _ from mercurial.node import nullid from mercurial import ( cmdutil, commands, context, dirstate, error, extensions, hg, localrepo, match as matchmod, registrar, sparse, util, ) # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should # be specifying the version(s) of Mercurial they are tested with, or # leave the attribute unspecified. testedwith = 'ships-with-hg-core' cmdtable = {} command = registrar.command(cmdtable) def uisetup(ui): _setupcommit(ui) def extsetup(ui): sparse.enabled = True _setupclone(ui) _setuplog(ui) _setupadd(ui) _setupdirstate(ui) def reposetup(ui, repo): if not util.safehasattr(repo, 'dirstate'): return if 'dirstate' in repo._filecache: repo.dirstate.repo = repo def replacefilecache(cls, propname, replacement): """Replace a filecache property with a new class. This allows changing the cache invalidation condition.""" origcls = cls assert callable(replacement) while cls is not object: if propname in cls.__dict__: orig = cls.__dict__[propname] setattr(cls, propname, replacement(orig)) break cls = cls.__bases__[0] if cls is object: raise AttributeError(_("type '%s' has no property '%s'") % (origcls, propname)) def _setupcommit(ui): def _refreshoncommit(orig, self, node): """Refresh the checkout when commits touch .hgsparse """ orig(self, node) repo = self._repo ctx = repo[node] profiles = sparse.patternsforrev(repo, ctx.rev())[2] # profiles will only have data if sparse is enabled. if set(profiles) & set(ctx.files()): origstatus = repo.status() origsparsematch = sparse.matcher(repo) sparse.refreshwdir(repo, origstatus, origsparsematch, force=True) sparse.prunetemporaryincludes(repo) extensions.wrapfunction(context.committablectx, 'markcommitted', _refreshoncommit) def _setuplog(ui): entry = commands.table['^log|history'] entry[1].append(('', 'sparse', None, "limit to changesets affecting the sparse checkout")) def _logrevs(orig, repo, opts): revs = orig(repo, opts) if opts.get('sparse'): sparsematch = sparse.matcher(repo) def ctxmatch(rev): ctx = repo[rev] return any(f for f in ctx.files() if sparsematch(f)) revs = revs.filter(ctxmatch) return revs extensions.wrapfunction(cmdutil, '_logrevs', _logrevs) def _clonesparsecmd(orig, ui, repo, *args, **opts): include_pat = opts.get('include') exclude_pat = opts.get('exclude') enableprofile_pat = opts.get('enable_profile') include = exclude = enableprofile = False if include_pat: pat = include_pat include = True if exclude_pat: pat = exclude_pat exclude = True if enableprofile_pat: pat = enableprofile_pat enableprofile = True if sum([include, exclude, enableprofile]) > 1: raise error.Abort(_("too many flags specified.")) if include or exclude or enableprofile: def clonesparse(orig, self, node, overwrite, *args, **kwargs): _config(self.ui, self.unfiltered(), pat, {}, include=include, exclude=exclude, enableprofile=enableprofile) return orig(self, node, overwrite, *args, **kwargs) extensions.wrapfunction(hg, 'updaterepo', clonesparse) return orig(ui, repo, *args, **opts) def _setupclone(ui): entry = commands.table['^clone'] entry[1].append(('', 'enable-profile', [], 'enable a sparse profile')) entry[1].append(('', 'include', [], 'include sparse pattern')) entry[1].append(('', 'exclude', [], 'exclude sparse pattern')) extensions.wrapcommand(commands.table, 'clone', _clonesparsecmd) def _setupadd(ui): entry = commands.table['^add'] entry[1].append(('s', 'sparse', None, 'also include directories of added files in sparse config')) def _add(orig, ui, repo, *pats, **opts): if opts.get('sparse'): dirs = set() for pat in pats: dirname, basename = util.split(pat) dirs.add(dirname) _config(ui, repo, list(dirs), opts, include=True) return orig(ui, repo, *pats, **opts) extensions.wrapcommand(commands.table, 'add', _add) def _setupdirstate(ui): """Modify the dirstate to prevent stat'ing excluded files, and to prevent modifications to files outside the checkout. """ def _dirstate(orig, repo): dirstate = orig(repo) dirstate.repo = repo return dirstate extensions.wrapfunction( localrepo.localrepository.dirstate, 'func', _dirstate) # The atrocity below is needed to wrap dirstate._ignore. It is a cached # property, which means normal function wrapping doesn't work. class ignorewrapper(object): def __init__(self, orig): self.orig = orig self.origignore = None self.func = None self.sparsematch = None def __get__(self, obj, type=None): repo = obj.repo origignore = self.orig.__get__(obj) sparsematch = sparse.matcher(repo) if sparsematch.always(): return origignore if self.sparsematch != sparsematch or self.origignore != origignore: self.func = matchmod.unionmatcher([ origignore, matchmod.negatematcher(sparsematch)]) self.sparsematch = sparsematch self.origignore = origignore return self.func def __set__(self, obj, value): return self.orig.__set__(obj, value) def __delete__(self, obj): return self.orig.__delete__(obj) replacefilecache(dirstate.dirstate, '_ignore', ignorewrapper) # dirstate.rebuild should not add non-matching files def _rebuild(orig, self, parent, allfiles, changedfiles=None): matcher = sparse.matcher(self.repo) if not matcher.always(): allfiles = allfiles.matches(matcher) if changedfiles: changedfiles = [f for f in changedfiles if matcher(f)] if changedfiles is not None: # In _rebuild, these files will be deleted from the dirstate # when they are not found to be in allfiles dirstatefilestoremove = set(f for f in self if not matcher(f)) changedfiles = dirstatefilestoremove.union(changedfiles) return orig(self, parent, allfiles, changedfiles) extensions.wrapfunction(dirstate.dirstate, 'rebuild', _rebuild) # Prevent adding files that are outside the sparse checkout editfuncs = ['normal', 'add', 'normallookup', 'copy', 'remove', 'merge'] hint = _('include file with `hg debugsparse --include <pattern>` or use ' + '`hg add -s <file>` to include file directory while adding') for func in editfuncs: def _wrapper(orig, self, *args): repo = self.repo sparsematch = sparse.matcher(repo) if not sparsematch.always(): dirstate = repo.dirstate for f in args: if (f is not None and not sparsematch(f) and f not in dirstate): raise error.Abort(_("cannot add '%s' - it is outside " "the sparse checkout") % f, hint=hint) return orig(self, *args) extensions.wrapfunction(dirstate.dirstate, func, _wrapper) @command('^debugsparse', [ ('I', 'include', False, _('include files in the sparse checkout')), ('X', 'exclude', False, _('exclude files in the sparse checkout')), ('d', 'delete', False, _('delete an include/exclude rule')), ('f', 'force', False, _('allow changing rules even with pending changes')), ('', 'enable-profile', False, _('enables the specified profile')), ('', 'disable-profile', False, _('disables the specified profile')), ('', 'import-rules', False, _('imports rules from a file')), ('', 'clear-rules', False, _('clears local include/exclude rules')), ('', 'refresh', False, _('updates the working after sparseness changes')), ('', 'reset', False, _('makes the repo full again')), ] + commands.templateopts, _('[--OPTION] PATTERN...')) def debugsparse(ui, repo, *pats, **opts): """make the current checkout sparse, or edit the existing checkout The sparse command is used to make the current checkout sparse. This means files that don't meet the sparse condition will not be written to disk, or show up in any working copy operations. It does not affect files in history in any way. Passing no arguments prints the currently applied sparse rules. --include and --exclude are used to add and remove files from the sparse checkout. The effects of adding an include or exclude rule are applied immediately. If applying the new rule would cause a file with pending changes to be added or removed, the command will fail. Pass --force to force a rule change even with pending changes (the changes on disk will be preserved). --delete removes an existing include/exclude rule. The effects are immediate. --refresh refreshes the files on disk based on the sparse rules. This is only necessary if .hg/sparse was changed by hand. --enable-profile and --disable-profile accept a path to a .hgsparse file. This allows defining sparse checkouts and tracking them inside the repository. This is useful for defining commonly used sparse checkouts for many people to use. As the profile definition changes over time, the sparse checkout will automatically be updated appropriately, depending on which changeset is checked out. Changes to .hgsparse are not applied until they have been committed. --import-rules accepts a path to a file containing rules in the .hgsparse format, allowing you to add --include, --exclude and --enable-profile rules in bulk. Like the --include, --exclude and --enable-profile switches, the changes are applied immediately. --clear-rules removes all local include and exclude rules, while leaving any enabled profiles in place. Returns 0 if editing the sparse checkout succeeds. """ include = opts.get('include') exclude = opts.get('exclude') force = opts.get('force') enableprofile = opts.get('enable_profile') disableprofile = opts.get('disable_profile') importrules = opts.get('import_rules') clearrules = opts.get('clear_rules') delete = opts.get('delete') refresh = opts.get('refresh') reset = opts.get('reset') count = sum([include, exclude, enableprofile, disableprofile, delete, importrules, refresh, clearrules, reset]) if count > 1: raise error.Abort(_("too many flags specified")) if count == 0: if repo.vfs.exists('sparse'): ui.status(repo.vfs.read("sparse") + "\n") temporaryincludes = sparse.readtemporaryincludes(repo) if temporaryincludes: ui.status(_("Temporarily Included Files (for merge/rebase):\n")) ui.status(("\n".join(temporaryincludes) + "\n")) else: ui.status(_('repo is not sparse\n')) return if include or exclude or delete or reset or enableprofile or disableprofile: _config(ui, repo, pats, opts, include=include, exclude=exclude, reset=reset, delete=delete, enableprofile=enableprofile, disableprofile=disableprofile, force=force) if importrules: _import(ui, repo, pats, opts, force=force) if clearrules: _clear(ui, repo, pats, force=force) if refresh: try: wlock = repo.wlock() fcounts = map( len, sparse.refreshwdir(repo, repo.status(), sparse.matcher(repo), force=force)) _verbose_output(ui, opts, 0, 0, 0, *fcounts) finally: wlock.release() def _config(ui, repo, pats, opts, include=False, exclude=False, reset=False, delete=False, enableprofile=False, disableprofile=False, force=False): """ Perform a sparse config update. Only one of the kwargs may be specified. """ wlock = repo.wlock() try: oldsparsematch = sparse.matcher(repo) raw = repo.vfs.tryread('sparse') if raw: oldinclude, oldexclude, oldprofiles = map( set, sparse.parseconfig(ui, raw)) else: oldinclude = set() oldexclude = set() oldprofiles = set() try: if reset: newinclude = set() newexclude = set() newprofiles = set() else: newinclude = set(oldinclude) newexclude = set(oldexclude) newprofiles = set(oldprofiles) oldstatus = repo.status() if any(pat.startswith('/') for pat in pats): ui.warn(_('warning: paths cannot start with /, ignoring: %s\n') % ([pat for pat in pats if pat.startswith('/')])) elif include: newinclude.update(pats) elif exclude: newexclude.update(pats) elif enableprofile: newprofiles.update(pats) elif disableprofile: newprofiles.difference_update(pats) elif delete: newinclude.difference_update(pats) newexclude.difference_update(pats) sparse.writeconfig(repo, newinclude, newexclude, newprofiles) fcounts = map( len, sparse.refreshwdir(repo, oldstatus, oldsparsematch, force=force)) profilecount = (len(newprofiles - oldprofiles) - len(oldprofiles - newprofiles)) includecount = (len(newinclude - oldinclude) - len(oldinclude - newinclude)) excludecount = (len(newexclude - oldexclude) - len(oldexclude - newexclude)) _verbose_output( ui, opts, profilecount, includecount, excludecount, *fcounts) except Exception: sparse.writeconfig(repo, oldinclude, oldexclude, oldprofiles) raise finally: wlock.release() def _import(ui, repo, files, opts, force=False): with repo.wlock(): # load union of current active profile revs = [repo.changelog.rev(node) for node in repo.dirstate.parents() if node != nullid] # read current configuration raw = repo.vfs.tryread('sparse') oincludes, oexcludes, oprofiles = sparse.parseconfig(ui, raw) includes, excludes, profiles = map( set, (oincludes, oexcludes, oprofiles)) # all active rules aincludes, aexcludes, aprofiles = set(), set(), set() for rev in revs: rincludes, rexcludes, rprofiles = sparse.patternsforrev(repo, rev) aincludes.update(rincludes) aexcludes.update(rexcludes) aprofiles.update(rprofiles) # import rules on top; only take in rules that are not yet # part of the active rules. changed = False for file in files: with util.posixfile(util.expandpath(file)) as importfile: iincludes, iexcludes, iprofiles = sparse.parseconfig( ui, importfile.read()) oldsize = len(includes) + len(excludes) + len(profiles) includes.update(iincludes - aincludes) excludes.update(iexcludes - aexcludes) profiles.update(set(iprofiles) - aprofiles) if len(includes) + len(excludes) + len(profiles) > oldsize: changed = True profilecount = includecount = excludecount = 0 fcounts = (0, 0, 0) if changed: profilecount = len(profiles - aprofiles) includecount = len(includes - aincludes) excludecount = len(excludes - aexcludes) oldstatus = repo.status() oldsparsematch = sparse.matcher(repo) sparse.writeconfig(repo, includes, excludes, profiles) try: fcounts = map( len, sparse.refreshwdir(repo, oldstatus, oldsparsematch, force=force)) except Exception: sparse.writeconfig(repo, oincludes, oexcludes, oprofiles) raise _verbose_output(ui, opts, profilecount, includecount, excludecount, *fcounts) def _clear(ui, repo, files, force=False): with repo.wlock(): raw = repo.vfs.tryread('sparse') includes, excludes, profiles = sparse.parseconfig(ui, raw) if includes or excludes: oldstatus = repo.status() oldsparsematch = sparse.matcher(repo) sparse.writeconfig(repo, set(), set(), profiles) sparse.refreshwdir(repo, oldstatus, oldsparsematch, force) def _verbose_output(ui, opts, profilecount, includecount, excludecount, added, dropped, lookup): """Produce --verbose and templatable output This specifically enables -Tjson, providing machine-readable stats on how the sparse profile changed. """ with ui.formatter('sparse', opts) as fm: fm.startitem() fm.condwrite(ui.verbose, 'profiles_added', 'Profile # change: %d\n', profilecount) fm.condwrite(ui.verbose, 'include_rules_added', 'Include rule # change: %d\n', includecount) fm.condwrite(ui.verbose, 'exclude_rules_added', 'Exclude rule # change: %d\n', excludecount) # In 'plain' verbose mode, mergemod.applyupdates already outputs what # files are added or removed outside of the templating formatter # framework. No point in repeating ourselves in that case. if not fm.isplain(): fm.condwrite(ui.verbose, 'files_added', 'Files added: %d\n', added) fm.condwrite(ui.verbose, 'files_dropped', 'Files dropped: %d\n', dropped) fm.condwrite(ui.verbose, 'files_conflicting', 'Files conflicting: %d\n', lookup)