filelog: stop proxying flags() (API)
Per-revision storage flags are kinda a revlog-centric API. (Except for
the fact that changegroup uses the same integer flags as revlog does
and there's minimal verification that the server's flags map to the
client's storage flags - but that's another problem.)
The last user of flags() was in verify.py and that code was just moved
into revlog.py and is accessed behind the verifyintegrity() file
storage API.
Since there are no more consumers, let's drop the proxy and remove
the method from the file storage interface.
This commit only drops the dedicated API for reading a single
revision's storage flags: we still support reading and writing flags
through the bulk data retrieval and add revision APIs. And since
changegroups encode revlog integer flags over the wire, we'll always
need to support flags at some level. The removal of individual storage
flags may be too premature. But since flags() is now unused, I'd like
to see how far we can get without that dedicated API - especially
since it uses revision numbers instead of nodes.
Differential Revision: https://phab.mercurial-scm.org/D4746
============================================
Testing obsolescence markers push: Cases D.4
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category D: Partial Information Case
TestCase 4: Unknown changeset in between known changesets
D.4 Unknown changeset in between known one
==========================================
.. Mostly a clarification case
..
.. {{{
.. B ø⇠◌⇠○ B''
.. | |
.. A ø⇠◌⇠◔ A'
.. \ /
.. ● O
..
.. }}}
..
.. Should be treated as A.3 case:
..
.. {{{
..
.. B ø⇠○ B''
.. | |
.. A ø⇠◔ A'
.. |/
.. ● O
..
.. }}}
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos D.4
creating test repo for test case D.4
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ hg update -q 0
$ mkcommit A1
created new head
$ mkcommit B1
$ hg debugobsolete `getid 'desc(A0)'` aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
obsoleted 1 changesets
1 new orphan changesets
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A1)'`
$ hg debugobsolete `getid 'desc(B0)'` bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
obsoleted 1 changesets
$ hg debugobsolete bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb `getid 'desc(B1)'`
$ hg log -G --hidden
@ 069b05c3876d (draft): B1
|
o e5ea8f9c7314 (draft): A1
|
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
Actual Test
-----------
$ dotest D.4 A1
## Running testcase D.4
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 2 new obsolescence markers
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
2 new obsolescence markers
new changesets e5ea8f9c7314 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}