view Makefile @ 30817:2b279126b8f5

revlog: use compression engine APIs for decompression

Now that compression engines declare their header in revlog chunks
and can decompress revlog chunks, we refactor revlog.decompress()
to use them.

Making full use of the property that revlog compressor objects are
reusable, revlog instances now maintain a dict mapping an engine's
revlog header to a compressor object. This is not only a performance
optimization for engines where compressor object reuse can result in
better performance, but it also serves as a cache of header values
so we don't need to perform redundant lookups against the compression
engine manager. (Yes, I measured and the overhead of a function call
versus a dict lookup was observed.)

Replacing the previous inline lookup table with a dict lookup was
measured to make chunk reading ~2.5% slower on changelogs and ~4.5%
slower on manifests. So, the inline lookup table has been mostly
preserved so we don't lose performance. This is unfortunate. But
many decompression operations complete in microseconds, so Python
attribute lookup, dict lookup, and function calls do matter.

The impact of this change on mozilla-unified is as follows:

$ hg perfrevlogchunks -c
! chunk
! wall 1.953663 comb 1.950000 user 1.920000 sys 0.030000 (best of 6)
! wall 1.946000 comb 1.940000 user 1.910000 sys 0.030000 (best of 6)
! chunk batch
! wall 1.791075 comb 1.800000 user 1.760000 sys 0.040000 (best of 6)
! wall 1.785690 comb 1.770000 user 1.750000 sys 0.020000 (best of 6)

$ hg perfrevlogchunks -m
! chunk
! wall 2.587262 comb 2.580000 user 2.550000 sys 0.030000 (best of 4)
! wall 2.616330 comb 2.610000 user 2.560000 sys 0.050000 (best of 4)
! chunk batch
! wall 2.427092 comb 2.420000 user 2.400000 sys 0.020000 (best of 5)
! wall 2.462061 comb 2.460000 user 2.400000 sys 0.060000 (best of 4)

Changelog chunk reading is slightly faster but manifest reading is
slower. What gives?

On this repo, 99.85% of changelog entries are zlib compressed (the 'x'
header). On the manifest, 67.5% are zlib and 32.4% are '\0'. This patch
swapped the test order of 'x' and '\0' so now 'x' is tested first. This
makes changelogs faster since they almost always hit the first branch.
This makes a significant percentage of manifest '\0' chunks slower
because that code path now performs an extra test. Yes, I too can't
believe we're able to measure the impact of an if..elif with simple
string compares. I reckon this code would benefit from being written
in C...

# If you want to change PREFIX, do not just edit it below. The changed
# value wont get passed on to recursive make calls. You should instead
# override the variable on the command like:
#
# % make PREFIX=/opt/ install

export PREFIX=/usr/local
PYTHON=python
$(eval HGROOT := $(shell pwd))
HGPYTHONS ?= $(HGROOT)/build/pythons
PURE=
PYFILES:=$(shell find mercurial hgext doc -name '*.py')
DOCFILES=mercurial/help/*.txt
export LANGUAGE=C
export LC_ALL=C
TESTFLAGS ?= $(shell echo $$HGTESTFLAGS)

# Set this to e.g. "mingw32" to use a non-default compiler.
COMPILER=

COMPILERFLAG_tmp_ =
COMPILERFLAG_tmp_${COMPILER} ?= -c $(COMPILER)
COMPILERFLAG=${COMPILERFLAG_tmp_${COMPILER}}

help:
	@echo 'Commonly used make targets:'
	@echo '  all          - build program and documentation'
	@echo '  install      - install program and man pages to $$PREFIX ($(PREFIX))'
	@echo '  install-home - install with setup.py install --home=$$HOME ($(HOME))'
	@echo '  local        - build for inplace usage'
	@echo '  tests        - run all tests in the automatic test suite'
	@echo '  test-foo     - run only specified tests (e.g. test-merge1.t)'
	@echo '  dist         - run all tests and create a source tarball in dist/'
	@echo '  clean        - remove files created by other targets'
	@echo '                 (except installed files or dist source tarball)'
	@echo '  update-pot   - update i18n/hg.pot'
	@echo
	@echo 'Example for a system-wide installation under /usr/local:'
	@echo '  make all && su -c "make install" && hg version'
	@echo
	@echo 'Example for a local installation (usable in this directory):'
	@echo '  make local && ./hg version'

all: build doc

local:
	$(PYTHON) setup.py $(PURE) \
	  build_py -c -d . \
	  build_ext $(COMPILERFLAG) -i \
	  build_hgexe $(COMPILERFLAG) -i \
	  build_mo
	env HGRCPATH= $(PYTHON) hg version

build:
	$(PYTHON) setup.py $(PURE) build $(COMPILERFLAG)

wheel:
	FORCE_SETUPTOOLS=1 $(PYTHON) setup.py $(PURE) bdist_wheel $(COMPILERFLAG)

doc:
	$(MAKE) -C doc

cleanbutpackages:
	-$(PYTHON) setup.py clean --all # ignore errors from this command
	find contrib doc hgext hgext3rd i18n mercurial tests \
		\( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';'
	rm -f $(addprefix mercurial/,$(notdir $(wildcard mercurial/pure/[a-z]*.py)))
	rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err
	rm -f mercurial/__modulepolicy__.py
	if test -d .hg; then rm -f mercurial/__version__.py; fi
	rm -rf build mercurial/locale
	$(MAKE) -C doc clean
	$(MAKE) -C contrib/chg distclean

clean: cleanbutpackages
	rm -rf packages

install: install-bin install-doc

install-bin: build
	$(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force

install-doc: doc
	cd doc && $(MAKE) $(MFLAGS) install

install-home: install-home-bin install-home-doc

install-home-bin: build
	$(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force

install-home-doc: doc
	cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install

MANIFEST-doc:
	$(MAKE) -C doc MANIFEST

MANIFEST.in: MANIFEST-doc
	hg manifest | sed -e 's/^/include /' > MANIFEST.in
	echo include mercurial/__version__.py >> MANIFEST.in
	sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in

dist:	tests dist-notests

dist-notests:	doc MANIFEST.in
	TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist

check: tests

tests:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS)

test-%:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@

testpy-%:
	@echo Looking for Python $* in $(HGPYTHONS)
	[ -e $(HGPYTHONS)/$*/bin/python ] || ( \
	cd $$(mktemp --directory --tmpdir) && \
        $(MAKE) -f $(HGROOT)/contrib/Makefile.python PYTHONVER=$* PREFIX=$(HGPYTHONS)/$* python )
	cd tests && $(HGPYTHONS)/$*/bin/python run-tests.py $(TESTFLAGS)

check-code:
	hg manifest | xargs python contrib/check-code.py

update-pot: i18n/hg.pot

i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext
	$(PYTHON) i18n/hggettext mercurial/commands.py \
	  hgext/*.py hgext/*/__init__.py \
	  mercurial/fileset.py mercurial/revset.py \
	  mercurial/templatefilters.py mercurial/templatekw.py \
	  mercurial/templater.py \
	  mercurial/filemerge.py \
	  mercurial/hgweb/webcommands.py \
	  $(DOCFILES) > i18n/hg.pot.tmp
        # All strings marked for translation in Mercurial contain
        # ASCII characters only. But some files contain string
        # literals like this '\037\213'. xgettext thinks it has to
        # parse them even though they are not marked for translation.
        # Extracting with an explicit encoding of ISO-8859-1 will make
        # xgettext "parse" and ignore them.
	echo $(PYFILES) | xargs \
	  xgettext --package-name "Mercurial" \
	  --msgid-bugs-address "<[e-mail]>" \
	  --copyright-holder "Matt Mackall <[e-mail]> and others" \
	  --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \
	  -d hg -p i18n -o hg.pot.tmp
	$(PYTHON) i18n/posplit i18n/hg.pot.tmp
        # The target file is not created before the last step. So it never is in
        # an intermediate state.
	mv -f i18n/hg.pot.tmp i18n/hg.pot

%.po: i18n/hg.pot
        # work on a temporary copy for never having a half completed target
	cp $@ $@.tmp
	msgmerge --no-location --update $@.tmp $^
	mv -f $@.tmp $@

# Packaging targets

osx:
	/usr/bin/python2.7 setup.py install --optimize=1 \
	  --root=build/mercurial/ --prefix=/usr/local/ \
	  --install-lib=/Library/Python/2.7/site-packages/
	make -C doc all install DESTDIR="$(PWD)/build/mercurial/"
	mkdir -p $${OUTPUTDIR:-dist}
	HGVER=$$((cat build/mercurial/Library/Python/2.7/site-packages/mercurial/__version__.py; echo 'print(version)') | python) && \
	OSXVER=$$(sw_vers -productVersion | cut -d. -f1,2) && \
	pkgbuild --root build/mercurial/ \
	  --identifier org.mercurial-scm.mercurial \
	  --version "$${HGVER}" \
	  build/mercurial.pkg && \
	productbuild --distribution contrib/macosx/distribution.xml \
	  --package-path build/ \
	  --version "$${HGVER}" \
	  --resources contrib/macosx/ \
	  "$${OUTPUTDIR:-dist/}"/Mercurial-"$${HGVER}"-macosx"$${OSXVER}".pkg

deb:
	contrib/builddeb

ppa:
	contrib/builddeb --source-only

docker-debian-jessie:
	mkdir -p packages/debian-jessie
	contrib/dockerdeb debian jessie

contrib/docker/ubuntu-%: contrib/docker/ubuntu.template
	sed "s/__CODENAME__/$*/" $< > $@

docker-ubuntu-trusty: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty

docker-ubuntu-trusty-ppa: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty --source-only

docker-ubuntu-xenial: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial

docker-ubuntu-xenial-ppa: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial --source-only

docker-ubuntu-yakkety: contrib/docker/ubuntu-yakkety
	contrib/dockerdeb ubuntu yakkety

docker-ubuntu-yakkety-ppa: contrib/docker/ubuntu-yakkety
	contrib/dockerdeb ubuntu yakkety --source-only

fedora20:
	mkdir -p packages/fedora20
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora20
	cp rpmbuild/SRPMS/* packages/fedora20
	rm -rf rpmbuild

docker-fedora20:
	mkdir -p packages/fedora20
	contrib/dockerrpm fedora20

fedora21:
	mkdir -p packages/fedora21
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora21
	cp rpmbuild/SRPMS/* packages/fedora21
	rm -rf rpmbuild

docker-fedora21:
	mkdir -p packages/fedora21
	contrib/dockerrpm fedora21

centos5:
	mkdir -p packages/centos5
	contrib/buildrpm --withpython
	cp rpmbuild/RPMS/*/* packages/centos5
	cp rpmbuild/SRPMS/* packages/centos5

docker-centos5:
	mkdir -p packages/centos5
	contrib/dockerrpm centos5 --withpython

centos6:
	mkdir -p packages/centos6
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos6
	cp rpmbuild/SRPMS/* packages/centos6

docker-centos6:
	mkdir -p packages/centos6
	contrib/dockerrpm centos6

centos7:
	mkdir -p packages/centos7
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos7
	cp rpmbuild/SRPMS/* packages/centos7

docker-centos7:
	mkdir -p packages/centos7
	contrib/dockerrpm centos7

.PHONY: help all local build doc cleanbutpackages clean install install-bin \
	install-doc install-home install-home-bin install-home-doc \
	dist dist-notests check tests check-code update-pot \
	osx fedora20 docker-fedora20 fedora21 docker-fedora21 \
	centos5 docker-centos5 centos6 docker-centos6 centos7 docker-centos7