view hgext/fetch.py @ 30817:2b279126b8f5

revlog: use compression engine APIs for decompression

Now that compression engines declare their header in revlog chunks
and can decompress revlog chunks, we refactor revlog.decompress()
to use them.

Making full use of the property that revlog compressor objects are
reusable, revlog instances now maintain a dict mapping an engine's
revlog header to a compressor object. This is not only a performance
optimization for engines where compressor object reuse can result in
better performance, but it also serves as a cache of header values
so we don't need to perform redundant lookups against the compression
engine manager. (Yes, I measured and the overhead of a function call
versus a dict lookup was observed.)

Replacing the previous inline lookup table with a dict lookup was
measured to make chunk reading ~2.5% slower on changelogs and ~4.5%
slower on manifests. So, the inline lookup table has been mostly
preserved so we don't lose performance. This is unfortunate. But
many decompression operations complete in microseconds, so Python
attribute lookup, dict lookup, and function calls do matter.

The impact of this change on mozilla-unified is as follows:

$ hg perfrevlogchunks -c
! chunk
! wall 1.953663 comb 1.950000 user 1.920000 sys 0.030000 (best of 6)
! wall 1.946000 comb 1.940000 user 1.910000 sys 0.030000 (best of 6)
! chunk batch
! wall 1.791075 comb 1.800000 user 1.760000 sys 0.040000 (best of 6)
! wall 1.785690 comb 1.770000 user 1.750000 sys 0.020000 (best of 6)

$ hg perfrevlogchunks -m
! chunk
! wall 2.587262 comb 2.580000 user 2.550000 sys 0.030000 (best of 4)
! wall 2.616330 comb 2.610000 user 2.560000 sys 0.050000 (best of 4)
! chunk batch
! wall 2.427092 comb 2.420000 user 2.400000 sys 0.020000 (best of 5)
! wall 2.462061 comb 2.460000 user 2.400000 sys 0.060000 (best of 4)

Changelog chunk reading is slightly faster but manifest reading is
slower. What gives?

On this repo, 99.85% of changelog entries are zlib compressed (the 'x'
header). On the manifest, 67.5% are zlib and 32.4% are '\0'. This patch
swapped the test order of 'x' and '\0' so now 'x' is tested first. This
makes changelogs faster since they almost always hit the first branch.
This makes a significant percentage of manifest '\0' chunks slower
because that code path now performs an extra test. Yes, I too can't
believe we're able to measure the impact of an if..elif with simple
string compares. I reckon this code would benefit from being written
in C...

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import (
    short,
)
from mercurial import (
    cmdutil,
    commands,
    error,
    exchange,
    hg,
    lock,
    util,
)

release = lock.release
cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('fetch',
    [('r', 'rev', [],
     _('a specific revision you would like to pull'), _('REV')),
    ('e', 'edit', None, _('invoke editor on commit messages')),
    ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
    ('', 'switch-parent', None, _('switch parents when merging')),
    ] + commands.commitopts + commands.commitopts2 + commands.remoteopts,
    _('hg fetch [SOURCE]'))
def fetch(ui, repo, source='default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    parent, _p2 = repo.dirstate.parents()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise error.Abort(_('working directory not at branch tip'),
                         hint=_("use 'hg update' to check out branch tip"))

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()

        cmdutil.bailifchanged(repo)

        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise error.Abort(_('multiple heads in this branch '
                               '(use "hg heads ." and "hg merge" to merge)'))

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(_('pulling from %s\n') %
                  util.hidepassword(ui.expandpath(source)))
        revs = None
        if opts['rev']:
            try:
                revs = [other.lookup(rev) for rev in opts['rev']]
            except error.CapabilityError:
                err = _("other repository doesn't support revision lookup, "
                        "so a rev cannot be specified.")
                raise error.Abort(err)

        # Are there any changes at all?
        modheads = exchange.pull(repo, other, heads=revs).cgresult
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(_('not merging with %d other new branch heads '
                        '(use "hg heads ." and "hg merge" to merge them)\n') %
                      (len(newheads) - 1))
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts['switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(_('updating to %d:%s\n') %
                          (repo.changelog.rev(firstparent),
                           short(firstparent)))
            hg.clean(repo, firstparent)
            ui.status(_('merging with %d:%s\n') %
                      (repo.changelog.rev(secondparent), short(secondparent)))
            err = hg.merge(repo, secondparent, remind=False)

        if not err:
            # we don't translate commit messages
            message = (cmdutil.logmessage(ui, opts) or
                       ('Automated merge with %s' %
                        util.removeauth(other.url())))
            editopt = opts.get('edit') or opts.get('force_editor')
            editor = cmdutil.getcommiteditor(edit=editopt, editform='fetch')
            n = repo.commit(message, opts['user'], opts['date'], editor=editor)
            ui.status(_('new changeset %d:%s merges remote changes '
                        'with local\n') % (repo.changelog.rev(n),
                                           short(n)))

        return err

    finally:
        release(lock, wlock)