view hgext/hgk.py @ 30817:2b279126b8f5

revlog: use compression engine APIs for decompression

Now that compression engines declare their header in revlog chunks
and can decompress revlog chunks, we refactor revlog.decompress()
to use them.

Making full use of the property that revlog compressor objects are
reusable, revlog instances now maintain a dict mapping an engine's
revlog header to a compressor object. This is not only a performance
optimization for engines where compressor object reuse can result in
better performance, but it also serves as a cache of header values
so we don't need to perform redundant lookups against the compression
engine manager. (Yes, I measured and the overhead of a function call
versus a dict lookup was observed.)

Replacing the previous inline lookup table with a dict lookup was
measured to make chunk reading ~2.5% slower on changelogs and ~4.5%
slower on manifests. So, the inline lookup table has been mostly
preserved so we don't lose performance. This is unfortunate. But
many decompression operations complete in microseconds, so Python
attribute lookup, dict lookup, and function calls do matter.

The impact of this change on mozilla-unified is as follows:

$ hg perfrevlogchunks -c
! chunk
! wall 1.953663 comb 1.950000 user 1.920000 sys 0.030000 (best of 6)
! wall 1.946000 comb 1.940000 user 1.910000 sys 0.030000 (best of 6)
! chunk batch
! wall 1.791075 comb 1.800000 user 1.760000 sys 0.040000 (best of 6)
! wall 1.785690 comb 1.770000 user 1.750000 sys 0.020000 (best of 6)

$ hg perfrevlogchunks -m
! chunk
! wall 2.587262 comb 2.580000 user 2.550000 sys 0.030000 (best of 4)
! wall 2.616330 comb 2.610000 user 2.560000 sys 0.050000 (best of 4)
! chunk batch
! wall 2.427092 comb 2.420000 user 2.400000 sys 0.020000 (best of 5)
! wall 2.462061 comb 2.460000 user 2.400000 sys 0.060000 (best of 4)

Changelog chunk reading is slightly faster but manifest reading is
slower. What gives?

On this repo, 99.85% of changelog entries are zlib compressed (the 'x'
header). On the manifest, 67.5% are zlib and 32.4% are '\0'. This patch
swapped the test order of 'x' and '\0' so now 'x' is tested first. This
makes changelogs faster since they almost always hit the first branch.
This makes a significant percentage of manifest '\0' chunks slower
because that code path now performs an extra test. Yes, I too can't
believe we're able to measure the impact of an if..elif with simple
string compares. I reckon this code would benefit from being written
in C...

# Minimal support for git commands on an hg repository
#
# Copyright 2005, 2006 Chris Mason <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''browse the repository in a graphical way

The hgk extension allows browsing the history of a repository in a
graphical way. It requires Tcl/Tk version 8.4 or later. (Tcl/Tk is not
distributed with Mercurial.)

hgk consists of two parts: a Tcl script that does the displaying and
querying of information, and an extension to Mercurial named hgk.py,
which provides hooks for hgk to get information. hgk can be found in
the contrib directory, and the extension is shipped in the hgext
repository, and needs to be enabled.

The :hg:`view` command will launch the hgk Tcl script. For this command
to work, hgk must be in your search path. Alternately, you can specify
the path to hgk in your configuration file::

  [hgk]
  path = /location/of/hgk

hgk can make use of the extdiff extension to visualize revisions.
Assuming you had already configured extdiff vdiff command, just add::

  [hgk]
  vdiff=vdiff

Revisions context menu will now display additional entries to fire
vdiff on hovered and selected revisions.
'''

from __future__ import absolute_import

import os

from mercurial.i18n import _
from mercurial.node import (
    nullid,
    nullrev,
    short,
)
from mercurial import (
    cmdutil,
    commands,
    obsolete,
    patch,
    scmutil,
)

cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('debug-diff-tree',
    [('p', 'patch', None, _('generate patch')),
    ('r', 'recursive', None, _('recursive')),
    ('P', 'pretty', None, _('pretty')),
    ('s', 'stdin', None, _('stdin')),
    ('C', 'copy', None, _('detect copies')),
    ('S', 'search', "", _('search'))],
    ('[OPTION]... NODE1 NODE2 [FILE]...'),
    inferrepo=True)
def difftree(ui, repo, node1=None, node2=None, *files, **opts):
    """diff trees from two commits"""
    def __difftree(repo, node1, node2, files=[]):
        assert node2 is not None
        mmap = repo[node1].manifest()
        mmap2 = repo[node2].manifest()
        m = scmutil.match(repo[node1], files)
        modified, added, removed  = repo.status(node1, node2, m)[:3]
        empty = short(nullid)

        for f in modified:
            # TODO get file permissions
            ui.write((":100664 100664 %s %s M\t%s\t%s\n") %
                     (short(mmap[f]), short(mmap2[f]), f, f))
        for f in added:
            ui.write((":000000 100664 %s %s N\t%s\t%s\n") %
                     (empty, short(mmap2[f]), f, f))
        for f in removed:
            ui.write((":100664 000000 %s %s D\t%s\t%s\n") %
                     (short(mmap[f]), empty, f, f))
    ##

    while True:
        if opts['stdin']:
            try:
                line = raw_input().split(' ')
                node1 = line[0]
                if len(line) > 1:
                    node2 = line[1]
                else:
                    node2 = None
            except EOFError:
                break
        node1 = repo.lookup(node1)
        if node2:
            node2 = repo.lookup(node2)
        else:
            node2 = node1
            node1 = repo.changelog.parents(node1)[0]
        if opts['patch']:
            if opts['pretty']:
                catcommit(ui, repo, node2, "")
            m = scmutil.match(repo[node1], files)
            diffopts = patch.difffeatureopts(ui)
            diffopts.git = True
            chunks = patch.diff(repo, node1, node2, match=m,
                                opts=diffopts)
            for chunk in chunks:
                ui.write(chunk)
        else:
            __difftree(repo, node1, node2, files=files)
        if not opts['stdin']:
            break

def catcommit(ui, repo, n, prefix, ctx=None):
    nlprefix = '\n' + prefix
    if ctx is None:
        ctx = repo[n]
    # use ctx.node() instead ??
    ui.write(("tree %s\n" % short(ctx.changeset()[0])))
    for p in ctx.parents():
        ui.write(("parent %s\n" % p))

    date = ctx.date()
    description = ctx.description().replace("\0", "")
    ui.write(("author %s %s %s\n" % (ctx.user(), int(date[0]), date[1])))

    if 'committer' in ctx.extra():
        ui.write(("committer %s\n" % ctx.extra()['committer']))

    ui.write(("revision %d\n" % ctx.rev()))
    ui.write(("branch %s\n" % ctx.branch()))
    if obsolete.isenabled(repo, obsolete.createmarkersopt):
        if ctx.obsolete():
            ui.write(("obsolete\n"))
    ui.write(("phase %s\n\n" % ctx.phasestr()))

    if prefix != "":
        ui.write("%s%s\n" % (prefix,
                             description.replace('\n', nlprefix).strip()))
    else:
        ui.write(description + "\n")
    if prefix:
        ui.write('\0')

@command('debug-merge-base', [], _('REV REV'))
def base(ui, repo, node1, node2):
    """output common ancestor information"""
    node1 = repo.lookup(node1)
    node2 = repo.lookup(node2)
    n = repo.changelog.ancestor(node1, node2)
    ui.write(short(n) + "\n")

@command('debug-cat-file',
    [('s', 'stdin', None, _('stdin'))],
    _('[OPTION]... TYPE FILE'),
    inferrepo=True)
def catfile(ui, repo, type=None, r=None, **opts):
    """cat a specific revision"""
    # in stdin mode, every line except the commit is prefixed with two
    # spaces.  This way the our caller can find the commit without magic
    # strings
    #
    prefix = ""
    if opts['stdin']:
        try:
            (type, r) = raw_input().split(' ')
            prefix = "    "
        except EOFError:
            return

    else:
        if not type or not r:
            ui.warn(_("cat-file: type or revision not supplied\n"))
            commands.help_(ui, 'cat-file')

    while r:
        if type != "commit":
            ui.warn(_("aborting hg cat-file only understands commits\n"))
            return 1
        n = repo.lookup(r)
        catcommit(ui, repo, n, prefix)
        if opts['stdin']:
            try:
                (type, r) = raw_input().split(' ')
            except EOFError:
                break
        else:
            break

# git rev-tree is a confusing thing.  You can supply a number of
# commit sha1s on the command line, and it walks the commit history
# telling you which commits are reachable from the supplied ones via
# a bitmask based on arg position.
# you can specify a commit to stop at by starting the sha1 with ^
def revtree(ui, args, repo, full="tree", maxnr=0, parents=False):
    def chlogwalk():
        count = len(repo)
        i = count
        l = [0] * 100
        chunk = 100
        while True:
            if chunk > i:
                chunk = i
                i = 0
            else:
                i -= chunk

            for x in xrange(chunk):
                if i + x >= count:
                    l[chunk - x:] = [0] * (chunk - x)
                    break
                if full is not None:
                    if (i + x) in repo:
                        l[x] = repo[i + x]
                        l[x].changeset() # force reading
                else:
                    if (i + x) in repo:
                        l[x] = 1
            for x in xrange(chunk - 1, -1, -1):
                if l[x] != 0:
                    yield (i + x, full is not None and l[x] or None)
            if i == 0:
                break

    # calculate and return the reachability bitmask for sha
    def is_reachable(ar, reachable, sha):
        if len(ar) == 0:
            return 1
        mask = 0
        for i in xrange(len(ar)):
            if sha in reachable[i]:
                mask |= 1 << i

        return mask

    reachable = []
    stop_sha1 = []
    want_sha1 = []
    count = 0

    # figure out which commits they are asking for and which ones they
    # want us to stop on
    for i, arg in enumerate(args):
        if arg.startswith('^'):
            s = repo.lookup(arg[1:])
            stop_sha1.append(s)
            want_sha1.append(s)
        elif arg != 'HEAD':
            want_sha1.append(repo.lookup(arg))

    # calculate the graph for the supplied commits
    for i, n in enumerate(want_sha1):
        reachable.append(set())
        visit = [n]
        reachable[i].add(n)
        while visit:
            n = visit.pop(0)
            if n in stop_sha1:
                continue
            for p in repo.changelog.parents(n):
                if p not in reachable[i]:
                    reachable[i].add(p)
                    visit.append(p)
                if p in stop_sha1:
                    continue

    # walk the repository looking for commits that are in our
    # reachability graph
    for i, ctx in chlogwalk():
        if i not in repo:
            continue
        n = repo.changelog.node(i)
        mask = is_reachable(want_sha1, reachable, n)
        if mask:
            parentstr = ""
            if parents:
                pp = repo.changelog.parents(n)
                if pp[0] != nullid:
                    parentstr += " " + short(pp[0])
                if pp[1] != nullid:
                    parentstr += " " + short(pp[1])
            if not full:
                ui.write("%s%s\n" % (short(n), parentstr))
            elif full == "commit":
                ui.write("%s%s\n" % (short(n), parentstr))
                catcommit(ui, repo, n, '    ', ctx)
            else:
                (p1, p2) = repo.changelog.parents(n)
                (h, h1, h2) = map(short, (n, p1, p2))
                (i1, i2) = map(repo.changelog.rev, (p1, p2))

                date = ctx.date()[0]
                ui.write("%s %s:%s" % (date, h, mask))
                mask = is_reachable(want_sha1, reachable, p1)
                if i1 != nullrev and mask > 0:
                    ui.write("%s:%s " % (h1, mask)),
                mask = is_reachable(want_sha1, reachable, p2)
                if i2 != nullrev and mask > 0:
                    ui.write("%s:%s " % (h2, mask))
                ui.write("\n")
            if maxnr and count >= maxnr:
                break
            count += 1

# git rev-list tries to order things by date, and has the ability to stop
# at a given commit without walking the whole repo.  TODO add the stop
# parameter
@command('debug-rev-list',
    [('H', 'header', None, _('header')),
    ('t', 'topo-order', None, _('topo-order')),
    ('p', 'parents', None, _('parents')),
    ('n', 'max-count', 0, _('max-count'))],
    ('[OPTION]... REV...'))
def revlist(ui, repo, *revs, **opts):
    """print revisions"""
    if opts['header']:
        full = "commit"
    else:
        full = None
    copy = [x for x in revs]
    revtree(ui, copy, repo, full, opts['max_count'], opts['parents'])

@command('view',
    [('l', 'limit', '',
     _('limit number of changes displayed'), _('NUM'))],
    _('[-l LIMIT] [REVRANGE]'))
def view(ui, repo, *etc, **opts):
    "start interactive history viewer"
    os.chdir(repo.root)
    optstr = ' '.join(['--%s %s' % (k, v) for k, v in opts.iteritems() if v])
    if repo.filtername is None:
        optstr += '--hidden'

    cmd = ui.config("hgk", "path", "hgk") + " %s %s" % (optstr, " ".join(etc))
    ui.debug("running %s\n" % cmd)
    ui.system(cmd)