view tests/test-pager.t @ 31690:2d11d278279a

ui: defer setting pager related properties until the pager has spawned

When --pager=on is given, dispatch.py spawns a pager before setting up color.
If the pager failed to launch, ui.pageractive was left set to True, so color
configured itself based on 'color.pagermode'.  A typical MSYS setting would be
'color.mode=auto, color.pagermode=ansi'.  In the failure case, this would print
a warning, disable the pager, and then print the raw ANSI codes to the terminal.

Care needs to be taken, because it appears that leaving ui.pageractive=True was
the only thing that prevented an attempt at running the pager again from inside
the command.  This results in a double warning message, so pager is simply
disabled on failure.

The ui config settings didn't need to be moved to fix this, but it seemed like
the right thing to do for consistency.

  $ cat >> fakepager.py <<EOF
  > import sys
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  > EOF

Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > formatted = yes
  > [pager]
  > pager = python $TESTTMP/fakepager.py
  > EOF

  $ hg init repo
  $ cd repo
  $ echo a >> a
  $ hg add a
  $ hg ci -m 'add a'
  $ for x in `python $TESTDIR/seq.py 1 10`; do
  >   echo a $x >> a
  >   hg ci -m "modify a $x"
  > done

By default diff and log are paged, but id is not:

  $ hg diff -c 2 --pager=yes
  paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
  paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '@@ -1,2 +1,3 @@\n'
  paged! ' a\n'
  paged! ' a 1\n'
  paged! '+a 2\n'

  $ hg log --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

  $ hg id
  46106edeeb38 tip

We can enable the pager on id:

BROKEN: should be paged
  $ hg --config pager.attend-id=yes id
  46106edeeb38 tip

Setting attend-$COMMAND to a false value works, even with pager in
core:
  $ hg --config pager.attend-diff=no diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

If 'log' is in attend, then 'history' should also be paged:
  $ hg history --limit 2 --config pager.attend=log
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Pager should not start if stdout is not a tty.

  $ hg log -l1 -q --config ui.formatted=False
  10:46106edeeb38

Pager should be disabled if pager.pager is empty (otherwise the output would
be silently lost.)

  $ hg log -l1 -q --config pager.pager=
  10:46106edeeb38

Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > color=
  > [color]
  > mode = ansi
  > EOF
  $ hg log --limit 3
  paged! '\x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 8\n'
  paged! '\n'

An invalid pager command name is reported sensibly if we don't have to
use shell=True in the subprocess call:
  $ hg log --limit 3 --config pager.pager=this-command-better-never-exist
  missing pager command 'this-command-better-never-exist', skipping pager
  \x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m (esc)
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  \x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 9
  
  \x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 8
  

A complicated pager command gets worse behavior. Bonus points if you can
improve this.
  $ hg log --limit 3 \
  >   --config pager.pager='this-command-better-never-exist --seriously' \
  >  2>/dev/null || true

Pager works with shell aliases.

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > echoa = !echo a
  > EOF

  $ hg echoa
  a
BROKEN: should be paged
  $ hg --config pager.attend-echoa=yes echoa
  a

Pager works with hg aliases including environment variables.

  $ cat >> $HGRCPATH <<'EOF'
  > [alias]
  > printa = log -T "$A\n" -r 0
  > EOF

  $ A=1 hg --config pager.attend-printa=yes printa
  paged! '1\n'
  $ A=2 hg --config pager.attend-printa=yes printa
  paged! '2\n'

Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
  $ A=2 hg --config pager.attend-printa=yes printa --pager=no
  2

Pager should not override the exit code of other commands

  $ cat >> $TESTTMP/fortytwo.py <<'EOF'
  > from mercurial import cmdutil, commands
  > cmdtable = {}
  > command = cmdutil.command(cmdtable)
  > @command('fortytwo', [], 'fortytwo', norepo=True)
  > def fortytwo(ui, *opts):
  >     ui.write('42\n')
  >     return 42
  > EOF

  $ cat >> $HGRCPATH <<'EOF'
  > [extensions]
  > fortytwo = $TESTTMP/fortytwo.py
  > EOF

  $ hg fortytwo --pager=on
  paged! '42\n'
  [42]

A command that asks for paging using ui.pager() directly works:
  $ hg blame a
  paged! ' 0: a\n'
  paged! ' 1: a 1\n'
  paged! ' 2: a 2\n'
  paged! ' 3: a 3\n'
  paged! ' 4: a 4\n'
  paged! ' 5: a 5\n'
  paged! ' 6: a 6\n'
  paged! ' 7: a 7\n'
  paged! ' 8: a 8\n'
  paged! ' 9: a 9\n'
  paged! '10: a 10\n'
but not with HGPLAIN
  $ HGPLAIN=1 hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10
explicit flags work too:
  $ hg blame --pager=no a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10

Put annotate in the ignore list for pager:
  $ cat >> $HGRCPATH <<EOF
  > [pager]
  > ignore = annotate
  > EOF
  $ hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10