view tests/test-exchange-obsmarkers-case-A3.t @ 41793:2e92624c3613 stable

test: update test-sparse-revlog.t output

This test is skipped unless a large artefact is pre-build. It seems like nobody
ran it in a while. Changeset 3764330f76a6 changed the expected output but
nobody noticed.

This changeset focus on the first and simpler step: putting the expected output
back to what one would get by running this test.

However this test changes highlight a couple of deeper issues:

1) Even if the revision content did not changed, a change in the delta
contained in the bundle affected the delta stored in the final revlog, changing
the test result. Since we are testing the delta computation strategy with
sparse, we should not blindly reuse the delta-base from the bundled delta.

2) A change in the format of the repository used to generate the bundle changed
the delta stored in the bundle. We should get a more stable output to avoid
future instabilities of this test.

3) The test is it not run by CI or developer.

We'll try to address all this issues in the coming changesets.

============================================
Testing obsolescence markers push: Cases A.3
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 3: old branch split in two, only one of the new one pushed
Variants:
# a: changesets are known on remote
# b: changesets are known on remote (push needs -f)

A.3 new branchs created, one pushed.
====================================

.. {{{
..   B' ○⇢ø B
..      | |
..      \Aø⇠◔ A'
..       \|/
..        ● O
.. }}}
..
.. Markers  exist from:
..
..  * `A ø⇠○ A'`
..  * `B ø⇠○ B'`
..
.. Command runs:
..
..  * hg push -r A
..
.. Expected exchange:
..
..  * chain from A
..
.. Expected exclude:
..
..  * chain from B
..
.. Extra note:
..
.. If A and B are remontly known, we should expect:
..
..  * `hg push` will complain about the new head
..  * `hg push` should complain about unstable history creation

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.3.a
  creating test repo for test case A.3.a
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B0
  $ hg update -q 0
  $ mkcommit A1
  created new head
  $ hg update -q 0
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  f6298a8ac3a4 (draft): B1
  |
  | o  e5ea8f9c7314 (draft): A1
  |/
  | x  6e72f0a95b5e (draft): B0
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test for first version (changeset unknown in remote)
-----------------------------------------------------------

  $ dotest A.3.a A1
  ## Running testcase A.3.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

other variant: changeset known in remote
----------------------------------------

  $ setuprepos A.3.b
  creating test repo for test case A.3.b
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B0
  $ hg push -q ../pushdest
  $ hg push -q ../pulldest
  $ hg update -q 0
  $ mkcommit A1
  created new head
  $ hg update -q 0
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  f6298a8ac3a4 (draft): B1
  |
  | o  e5ea8f9c7314 (draft): A1
  |/
  | x  6e72f0a95b5e (draft): B0
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test for first version (changeset known in remote)
-----------------------------------------------------------

check it complains about multiple heads

  $ cd A.3.b
  $ hg push -R main -r 'desc(A1)' pushdest
  pushing to pushdest
  searching for changes
  abort: push creates new remote head e5ea8f9c7314!
  (merge or see 'hg help push' for details about pushing new heads)
  [255]
  $ cd ..

test obsmarkers exchange.

  $ dotest A.3.b A1 -f
  ## Running testcase A.3.b
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files (+1 heads)
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  remote: 1 new orphan changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  1 new obsolescence markers
  obsoleted 1 changesets
  1 new orphan changesets
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}