view tests/test-convert-hg-startrev.t @ 36756:2ecb0fc535b1 stable

hgweb: always perform permissions checks on protocol commands (BC) (SEC)

Previously, the HTTP request handling code would only perform
permissions checking on a wire protocol command if that wire protocol
command defined its permissions / operation type. This meant that
commands (possibly provided by extensions) not defining their
operation type would bypass permissions check. This could lead
to exfiltration of data from servers and mutating repositories that
were supposed to be read-only.

This security issue has been present since the permissions table
was introduced by d3147b4e3e8a in 2008.

This commit changes the behavior of the HTTP server to always
perform permissions checking for protocol requests. If an
explicit permission for a wire protocol command is not defined,
the server assumes the command can be used for writing and
governs access accordingly.

.. bc::

   Wire protocol commands not defining their operation type in
   ``wireproto.PERMISSIONS`` are now assumed to be used for
   "push" operations and access control to run those commands
   is now enforced accordingly.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > [convert]
  > hg.saverev = yes
  > EOF

  $ glog()
  > {
  >     hg -R "$1" log -G --template '{rev} "{desc}" files: {files}\n'
  > }

  $ hg init source
  $ cd source

  $ echo a > a
  $ echo b > b
  $ echo f > f
  $ hg ci -d '0 0' -qAm '0: add a b f'
  $ echo c > c
  $ hg move f d
  $ hg ci -d '1 0' -qAm '1: add c, move f to d'
  $ hg copy a e
  $ echo b >> b
  $ hg ci -d '2 0' -qAm '2: copy e from a, change b'
  $ hg up -C 0
  2 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ echo a >> a
  $ hg ci -d '3 0' -qAm '3: change a'
  $ hg merge
  merging a and e to e
  3 files updated, 1 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -d '4 0' -qAm '4: merge 2 and 3'
  $ echo a >> a
  $ hg ci -d '5 0' -qAm '5: change a'
  $ cd ..

Convert from null revision

  $ hg convert --config convert.hg.startrev=null source full
  initializing destination full repository
  scanning source...
  sorting...
  converting...
  5 0: add a b f
  4 1: add c, move f to d
  3 2: copy e from a, change b
  2 3: change a
  1 4: merge 2 and 3
  0 5: change a

  $ glog full
  o  5 "5: change a" files: a
  |
  o    4 "4: merge 2 and 3" files: e f
  |\
  | o  3 "3: change a" files: a
  | |
  o |  2 "2: copy e from a, change b" files: b e
  | |
  o |  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f
  
  $ rm -Rf full

Convert from zero revision

  $ hg convert --config convert.hg.startrev=0 source full
  initializing destination full repository
  scanning source...
  sorting...
  converting...
  5 0: add a b f
  4 1: add c, move f to d
  3 2: copy e from a, change b
  2 3: change a
  1 4: merge 2 and 3
  0 5: change a

  $ glog full
  o  5 "5: change a" files: a
  |
  o    4 "4: merge 2 and 3" files: e f
  |\
  | o  3 "3: change a" files: a
  | |
  o |  2 "2: copy e from a, change b" files: b e
  | |
  o |  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f
  
Convert from merge parent

  $ hg convert --config convert.hg.startrev=1 source conv1
  initializing destination conv1 repository
  scanning source...
  sorting...
  converting...
  3 1: add c, move f to d
  2 2: copy e from a, change b
  1 4: merge 2 and 3
  0 5: change a

  $ glog conv1
  o  3 "5: change a" files: a
  |
  o  2 "4: merge 2 and 3" files: a e
  |
  o  1 "2: copy e from a, change b" files: b e
  |
  o  0 "1: add c, move f to d" files: a b c d
  
  $ cd conv1
  $ hg up -q

Check copy preservation

  $ hg st -C --change 2 e
  M e
  $ hg st -C --change 1 e
  A e
    a
  $ hg st -C --change 0 a
  A a

(It seems like a bug in log that the following doesn't show rev 1.)

  $ hg log --follow --copies e
  changeset:   2:82bbac3d2cf4
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     4: merge 2 and 3
  
  changeset:   0:23c3be426dce
  user:        test
  date:        Thu Jan 01 00:00:01 1970 +0000
  summary:     1: add c, move f to d
  
Check copy removal on missing parent

  $ hg log --follow --copies d
  changeset:   0:23c3be426dce
  user:        test
  date:        Thu Jan 01 00:00:01 1970 +0000
  summary:     1: add c, move f to d
  
  $ hg cat -r tip a b
  a
  a
  a
  b
  b
  $ hg -q verify
  $ cd ..

Convert from merge

  $ hg convert --config convert.hg.startrev=4 source conv4
  initializing destination conv4 repository
  scanning source...
  sorting...
  converting...
  1 4: merge 2 and 3
  0 5: change a
  $ glog conv4
  o  1 "5: change a" files: a
  |
  o  0 "4: merge 2 and 3" files: a b c d e
  
  $ cd conv4
  $ hg up -C
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat -r tip a b
  a
  a
  a
  b
  b
  $ hg -q verify
  $ cd ..

Convert from revset in convert.hg.revs

  $ hg convert --config convert.hg.revs='3:4+0' source revsetrepo
  initializing destination revsetrepo repository
  scanning source...
  sorting...
  converting...
  2 0: add a b f
  1 3: change a
  0 4: merge 2 and 3

  $ glog revsetrepo
  o  2 "4: merge 2 and 3" files: b c d e f
  |
  o  1 "3: change a" files: a
  |
  o  0 "0: add a b f" files: a b f
  
Convert from specified revs

  $ hg convert --rev 3 --rev 2 source multiplerevs
  initializing destination multiplerevs repository
  scanning source...
  sorting...
  converting...
  3 0: add a b f
  2 1: add c, move f to d
  1 2: copy e from a, change b
  0 3: change a
  $ glog multiplerevs
  o  3 "3: change a" files: a
  |
  | o  2 "2: copy e from a, change b" files: b e
  | |
  | o  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f
  
Convert in multiple steps that doesn't overlap - the link to the parent is
preserved anyway

  $ hg convert --config convert.hg.revs=::1 source multistep
  initializing destination multistep repository
  scanning source...
  sorting...
  converting...
  1 0: add a b f
  0 1: add c, move f to d
  $ hg convert --config convert.hg.revs=2 source multistep
  scanning source...
  sorting...
  converting...
  0 2: copy e from a, change b
  $ glog multistep
  o  2 "2: copy e from a, change b" files: b e
  |
  o  1 "1: add c, move f to d" files: c d f
  |
  o  0 "0: add a b f" files: a b f