phases: large rewrite on retract boundary
The new code is still pure Python, so we still have room to going significantly
faster. However its complexity of the complex part is `O(|[min_new_draft, tip]|)` instead of
`O(|[min_draft, tip]|` which should help tremendously one repository with old
draft (like mercurial-devel or mozilla-try).
This is especially useful as the most common "retract boundary" operation
happens when we commit/rewrite new drafts or when we push new draft to a
non-publishing server. In this case, the smallest new_revs is very close to the
tip and there is very few work to do.
A few smaller optimisation could be done for these cases and will be introduced in
later changesets.
We still have iterate over large sets of roots, but this is already a great
improvement for a very small amount of work. We gather information on the
affected changeset as we go as we can put it to use in the next changesets.
This extra data collection might slowdown the `register_new` case a bit, however
for register_new, it should not really matters. The set of new nodes is either
small, so the impact is negligible, or the set of new nodes is large, and the
amount of work to do to had them will dominate the overhead the collecting
information in `changed_revs`.
As this new code compute the changes on the fly, it unlock other interesting
improvement to be done in later changeset.
#!/usr/bin/env python3
"""
Utility for inspecting files in various ways.
This tool is like the collection of tools found in a unix environment but are
cross platform and stable and suitable for our needs in the test suite.
This can be used instead of tools like:
[
dd
find
head
hexdump
ls
md5sum
readlink
sha1sum
stat
tail
test
readlink.py
md5sum.py
"""
import binascii
import glob
import hashlib
import optparse
import os
import re
import sys
def iterbytes(s):
for i in range(len(s)):
yield s[i : i + 1]
def visit(opts, filenames, outfile):
"""Process filenames in the way specified in opts, writing output to
outfile."""
for f in sorted(filenames):
isstdin = f == '-'
if not isstdin and not os.path.lexists(f):
outfile.write(b'%s: file not found\n' % f.encode('utf-8'))
continue
quiet = opts.quiet and not opts.recurse or isstdin
isdir = os.path.isdir(f)
islink = os.path.islink(f)
isfile = os.path.isfile(f) and not islink
dirfiles = None
content = None
facts = []
if isfile:
if opts.type:
facts.append(b'file')
needs_reading = (
opts.hexdump,
opts.dump,
opts.md5,
opts.sha1,
opts.raw_sha1,
opts.sha256,
)
if any(needs_reading):
with open(f, 'rb') as fobj:
content = fobj.read()
elif islink:
if opts.type:
facts.append(b'link')
content = os.readlink(f).encode('utf8')
elif isstdin:
content = getattr(sys.stdin, 'buffer', sys.stdin).read()
if opts.size:
facts.append(b'size=%d' % len(content))
elif isdir:
if opts.recurse or opts.type:
dirfiles = glob.glob(f + '/*')
facts.append(b'directory with %d files' % len(dirfiles))
elif opts.type:
facts.append(b'type unknown')
if not isstdin:
stat = os.lstat(f)
if opts.size and not isdir:
facts.append(b'size=%d' % stat.st_size)
if opts.mode and not islink:
facts.append(b'mode=%o' % (stat.st_mode & 0o777))
if opts.links:
facts.append(b'links=%d' % stat.st_nlink)
if opts.newer:
# mtime might be in whole seconds so newer file might be same
if stat.st_mtime >= os.stat(opts.newer).st_mtime:
facts.append(
b'newer than %s' % opts.newer.encode('utf8', 'replace')
)
else:
facts.append(
b'older than %s' % opts.newer.encode('utf8', 'replace')
)
if opts.md5 and content is not None:
h = hashlib.md5(content)
facts.append(b'md5=%s' % binascii.hexlify(h.digest())[: opts.bytes])
if opts.raw_sha1 and content is not None:
h = hashlib.sha1(content)
facts.append(b'raw-sha1=%s' % h.digest()[: opts.bytes])
if opts.sha1 and content is not None:
h = hashlib.sha1(content)
facts.append(
b'sha1=%s' % binascii.hexlify(h.digest())[: opts.bytes]
)
if opts.sha256 and content is not None:
h = hashlib.sha256(content)
facts.append(
b'sha256=%s' % binascii.hexlify(h.digest())[: opts.bytes]
)
if isstdin:
outfile.write(b', '.join(facts) + b'\n')
elif facts:
outfile.write(b'%s: %s\n' % (f.encode('utf-8'), b', '.join(facts)))
elif not quiet:
outfile.write(b'%s:\n' % f.encode('utf-8'))
if content is not None:
chunk = content
if not islink:
if opts.lines:
if opts.lines >= 0:
chunk = b''.join(chunk.splitlines(True)[: opts.lines])
else:
chunk = b''.join(chunk.splitlines(True)[opts.lines :])
if opts.bytes:
if opts.bytes >= 0:
chunk = chunk[: opts.bytes]
else:
chunk = chunk[opts.bytes :]
if opts.hexdump:
for i in range(0, len(chunk), 16):
s = chunk[i : i + 16]
outfile.write(
b'%04x: %-47s |%s|\n'
% (
i,
b' '.join(b'%02x' % ord(c) for c in iterbytes(s)),
re.sub(b'[^ -~]', b'.', s),
)
)
if opts.dump:
if not quiet:
outfile.write(b'>>>\n')
outfile.write(chunk)
if not quiet:
if chunk.endswith(b'\n'):
outfile.write(b'<<<\n')
else:
outfile.write(b'\n<<< no trailing newline\n')
if opts.recurse and dirfiles:
assert not isstdin
visit(opts, dirfiles, outfile)
if __name__ == "__main__":
parser = optparse.OptionParser("%prog [options] [filenames]")
parser.add_option(
"-t",
"--type",
action="store_true",
help="show file type (file or directory)",
)
parser.add_option(
"-m", "--mode", action="store_true", help="show file mode"
)
parser.add_option(
"-l", "--links", action="store_true", help="show number of links"
)
parser.add_option(
"-s", "--size", action="store_true", help="show size of file"
)
parser.add_option(
"-n", "--newer", action="store", help="check if file is newer (or same)"
)
parser.add_option(
"-r", "--recurse", action="store_true", help="recurse into directories"
)
parser.add_option(
"-S",
"--sha1",
action="store_true",
help="show sha1 hash of the content",
)
parser.add_option(
"",
"--raw-sha1",
action="store_true",
help="show raw bytes of the sha1 hash of the content",
)
parser.add_option(
"",
"--sha256",
action="store_true",
help="show sha256 hash of the content",
)
parser.add_option(
"-M", "--md5", action="store_true", help="show md5 hash of the content"
)
parser.add_option(
"-D", "--dump", action="store_true", help="dump file content"
)
parser.add_option(
"-H", "--hexdump", action="store_true", help="hexdump file content"
)
parser.add_option(
"-B", "--bytes", type="int", help="number of characters to dump"
)
parser.add_option(
"-L", "--lines", type="int", help="number of lines to dump"
)
parser.add_option(
"-q", "--quiet", action="store_true", help="no default output"
)
(opts, filenames) = parser.parse_args(sys.argv[1:])
if not filenames:
filenames = ['-']
visit(opts, filenames, getattr(sys.stdout, 'buffer', sys.stdout))