phases: large rewrite on retract boundary
The new code is still pure Python, so we still have room to going significantly
faster. However its complexity of the complex part is `O(|[min_new_draft, tip]|)` instead of
`O(|[min_draft, tip]|` which should help tremendously one repository with old
draft (like mercurial-devel or mozilla-try).
This is especially useful as the most common "retract boundary" operation
happens when we commit/rewrite new drafts or when we push new draft to a
non-publishing server. In this case, the smallest new_revs is very close to the
tip and there is very few work to do.
A few smaller optimisation could be done for these cases and will be introduced in
later changesets.
We still have iterate over large sets of roots, but this is already a great
improvement for a very small amount of work. We gather information on the
affected changeset as we go as we can put it to use in the next changesets.
This extra data collection might slowdown the `register_new` case a bit, however
for register_new, it should not really matters. The set of new nodes is either
small, so the impact is negligible, or the set of new nodes is large, and the
amount of work to do to had them will dominate the overhead the collecting
information in `changed_revs`.
As this new code compute the changes on the fly, it unlock other interesting
improvement to be done in later changeset.
initialize
$ make_changes() {
> d=`pwd`
> [ ! -z $1 ] && cd $1
> echo "test `basename \`pwd\``" >> test
> hg commit -Am"${2:-test}"
> r=$?
> cd $d
> return $r
> }
$ ls -1a
.
..
$ hg init a
$ cd a
$ echo 'test' > test; hg commit -Am'test'
adding test
clone to b
$ mkdir ../b
$ cd ../b
$ hg clone ../a .
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo "[extensions]" >> .hg/hgrc
$ echo "bookflow=" >> .hg/hgrc
$ hg branch X
abort: creating named branches is disabled and you should use bookmarks
(see 'hg help bookflow')
[255]
$ hg bookmark X
$ hg bookmarks
* X 0:* (glob)
$ hg bookmark X
abort: bookmark X already exists, to move use the --rev option
[255]
$ make_changes
$ hg push ../a -q
$ hg bookmarks
\* X 1:* (glob)
change a
$ cd ../a
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 'test' >> test; hg commit -Am'test'
pull in b
$ cd ../b
$ hg pull -u
pulling from $TESTTMP/a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets * (glob)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(leaving bookmark X)
$ hg status
$ hg bookmarks
X 1:* (glob)
check protection of @ bookmark
$ hg bookmark @
$ hg bookmarks
\* @ 2:* (glob)
X 1:* (glob)
$ make_changes
abort: cannot commit, bookmark @ is protected
[255]
$ hg status
M test
$ hg bookmarks
\* @ 2:* (glob)
X 1:* (glob)
$ hg --config bookflow.protect= commit -Am"Updated test"
$ hg bookmarks
\* @ 3:* (glob)
X 1:* (glob)
check requirement for an active bookmark
$ hg bookmark -i
$ hg bookmarks
@ 3:* (glob)
X 1:* (glob)
$ make_changes
abort: cannot commit without an active bookmark
[255]
$ hg revert test
$ rm test.orig
$ hg status
make the bookmark move by updating it on a, and then pulling
# add a commit to a
$ cd ../a
$ hg bookmark X
$ hg bookmarks
\* X 2:* (glob)
$ make_changes
$ hg bookmarks
* X 3:81af7977fdb9
# go back to b, and check out X
$ cd ../b
$ hg up X
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(activating bookmark X)
$ hg bookmarks
@ 3:* (glob)
\* X 1:* (glob)
# pull, this should move the bookmark forward, because it was changed remotely
$ hg pull -u | grep "updating to active bookmark X"
updating to active bookmark X
$ hg bookmarks
@ 3:* (glob)
* X 4:81af7977fdb9
the bookmark should not move if it diverged from remote
$ hg -R ../a status
$ hg -R ../b status
$ make_changes ../a
$ make_changes ../b
$ hg -R ../a status
$ hg -R ../b status
$ hg -R ../a bookmarks
* X 4:238292f60a57
$ hg -R ../b bookmarks
@ 3:* (glob)
* X 5:096f7e86892d
$ cd ../b
$ # make sure we cannot push after bookmarks diverged
$ hg push -B X | grep abort
abort: push creates new remote head * with bookmark 'X' (glob)
(pull and merge or see 'hg help push' for details about pushing new heads)
[1]
$ hg pull -u | grep divergent
divergent bookmark X stored as X@default
1 other divergent bookmarks for "X"
$ hg bookmarks
@ 3:* (glob)
* X 5:096f7e86892d
X@default 6:238292f60a57
$ hg id -in
096f7e86892d 5
$ make_changes
$ hg status
$ hg bookmarks
@ 3:* (glob)
* X 7:227f941aeb07
X@default 6:238292f60a57
now merge with the remote bookmark
$ hg merge X@default --tool :local -q
$ hg status
M test
$ hg commit -m"Merged with X@default"
$ hg bookmarks
@ 3:* (glob)
* X 8:26fed9bb3219
$ hg push -B X | grep bookmark
pushing to $TESTTMP/a (?)
updating bookmark X
$ cd ../a
$ hg up -q
$ hg bookmarks
* X 7:26fed9bb3219
test hg pull when there is more than one descendant
$ cd ../a
$ hg bookmark Z
$ hg bookmark Y
$ make_changes . YY
$ hg up Z -q
$ make_changes . ZZ
created new head
$ hg bookmarks
X 7:26fed9bb3219
Y 8:131e663dbd2a
* Z 9:b74a4149df25
$ hg log -r 'p1(Y)' -r 'p1(Z)' -T '{rev}\n' # prove that Y and Z share the same parent
7
$ hg log -r 'Y%Z' -T '{rev}\n' # revs in Y but not in Z
8
$ hg log -r 'Z%Y' -T '{rev}\n' # revs in Z but not in Y
9
$ cd ../b
$ hg pull -uq
$ hg id
b74a4149df25 tip Z
$ hg bookmarks | grep \* # no active bookmark
[1]
test shelving
$ cd ../a
$ echo anotherfile > anotherfile # this change should not conflict
$ hg add anotherfile
$ hg commit -m"Change in a"
$ cd ../b
$ hg up Z | grep Z
(activating bookmark Z)
$ hg book | grep \* # make sure active bookmark
\* Z 10:* (glob)
$ echo "test b" >> test
$ hg diff --stat
test | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg shelve
shelved as Z
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg pull -uq
$ hg unshelve
unshelving change 'Z'
rebasing shelved changes
$ hg diff --stat
test | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
make the bookmark move by updating it on a, and then pulling with a local change
# add a commit to a
$ cd ../a
$ hg up -C X |grep -F "activating bookmark X"
(activating bookmark X)
# go back to b, and check out X
$ cd ../b
$ hg up -C X |grep -F "activating bookmark X"
(activating bookmark X)
# update and push from a
$ make_changes ../a
created new head
$ echo "more" >> test
$ hg pull -u 2>&1 | grep -F -v TESTTMP| grep -F -v "searching for changes" | grep -F -v adding
pulling from $TESTTMP/a
updating bookmark X
added 1 changesets with 0 changes to 0 files (+1 heads)
new changesets * (glob)
updating to active bookmark X
merging test
warning: conflicts while merging test! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges
$ hg update -Cq
$ rm test.orig
make sure that commits aren't possible if working directory is not pointing to active bookmark
$ hg -R ../a status
$ hg -R ../b status
$ hg -R ../a id -i
36a6e592ec06
$ hg -R ../a book | grep X
\* X \d+:36a6e592ec06 (re)
$ hg -R ../b id -i
36a6e592ec06
$ hg -R ../b book | grep X
\* X \d+:36a6e592ec06 (re)
$ make_changes ../a
$ hg -R ../a book | grep X
\* X \d+:f73a71c992b8 (re)
$ cd ../b
$ hg pull 2>&1 | grep -v add | grep -v pulling | grep -v searching | grep -v changeset
updating bookmark X
(run 'hg update' to get a working copy)
working directory out of sync with active bookmark, run 'hg up X'
$ hg id -i # we're still on the old commit
36a6e592ec06
$ hg book | grep X # while the bookmark moved
\* X \d+:f73a71c992b8 (re)
$ make_changes
abort: cannot commit, working directory out of sync with active bookmark
(run 'hg up X')
[255]
$ hg up -Cq -r . # cleanup local changes
$ hg status
$ hg id -i # we're still on the old commit
36a6e592ec06
$ hg up X -q
$ hg id -i # now we're on X
f73a71c992b8
$ hg book | grep X
\* X \d+:f73a71c992b8 (re)