phases: large rewrite on retract boundary
The new code is still pure Python, so we still have room to going significantly
faster. However its complexity of the complex part is `O(|[min_new_draft, tip]|)` instead of
`O(|[min_draft, tip]|` which should help tremendously one repository with old
draft (like mercurial-devel or mozilla-try).
This is especially useful as the most common "retract boundary" operation
happens when we commit/rewrite new drafts or when we push new draft to a
non-publishing server. In this case, the smallest new_revs is very close to the
tip and there is very few work to do.
A few smaller optimisation could be done for these cases and will be introduced in
later changesets.
We still have iterate over large sets of roots, but this is already a great
improvement for a very small amount of work. We gather information on the
affected changeset as we go as we can put it to use in the next changesets.
This extra data collection might slowdown the `register_new` case a bit, however
for register_new, it should not really matters. The set of new nodes is either
small, so the impact is negligible, or the set of new nodes is large, and the
amount of work to do to had them will dominate the overhead the collecting
information in `changed_revs`.
As this new code compute the changes on the fly, it unlock other interesting
improvement to be done in later changeset.
Test interactions between mq and patch.eol
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> [diff]
> nodates = 1
> EOF
$ cat > makepatch.py <<EOF
> f = open('eol.diff', 'wb')
> w = f.write
> w(b'test message\n')
> w(b'diff --git a/a b/a\n')
> w(b'--- a/a\n')
> w(b'+++ b/a\n')
> w(b'@@ -1,5 +1,5 @@\n')
> w(b' a\n')
> w(b'-b\r\n')
> w(b'+y\r\n')
> w(b' c\r\n')
> w(b' d\n')
> w(b'-e\n')
> w(b'\\\\ No newline at end of file\n')
> w(b'+z\r\n')
> w(b'\\\\ No newline at end of file\r\n')
> EOF
$ cat > cateol.py <<EOF
> import sys
> try:
> stdout = sys.stdout.buffer
> except AttributeError:
> stdout = sys.stdout
> for line in open(sys.argv[1], 'rb'):
> line = line.replace(b'\r', b'<CR>')
> line = line.replace(b'\n', b'<LF>')
> stdout.write(line + b'\n')
> EOF
$ hg init repo
$ cd repo
$ echo '\.diff' > .hgignore
$ echo '\.rej' >> .hgignore
Test different --eol values
$ "$PYTHON" -c 'open("a", "wb").write(b"a\nb\nc\nd\ne")'
$ hg ci -Am adda
adding .hgignore
adding a
$ "$PYTHON" ../makepatch.py
$ hg qimport eol.diff
adding eol.diff to series file
should fail in strict mode
$ hg qpush
applying eol.diff
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
invalid eol
$ hg --config patch.eol='LFCR' qpush
applying eol.diff
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
force LF
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ hg qrefresh
$ "$PYTHON" ../cateol.py .hg/patches/eol.diff
# HG changeset patch<LF>
# Parent 0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
test message<LF>
<LF>
diff -r 0d0bf99a8b7a a<LF>
--- a/a<LF>
+++ b/a<LF>
@@ -1,5 +1,5 @@<LF>
-a<LF>
-b<LF>
-c<LF>
-d<LF>
-e<LF>
\ No newline at end of file<LF>
+a<CR><LF>
+y<CR><LF>
+c<CR><LF>
+d<CR><LF>
+z<LF>
\ No newline at end of file<LF>
$ "$PYTHON" ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again forcing LF and compare revisions
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ "$PYTHON" ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again without LF and compare revisions
$ hg qpush
applying eol.diff
now at: eol.diff
$ "$PYTHON" ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
$ cd ..
Test .rej file EOL are left unchanged
$ hg init testeol
$ cd testeol
$ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n3\r\n4')"
$ hg ci -Am adda
adding a
$ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n33\r\n4')"
$ hg qnew patch1
$ hg qpop
popping patch1
patch queue now empty
$ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n22\r\n33\r\n4')"
$ hg ci -m changea
$ hg --config 'patch.eol=LF' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ hg --config 'patch.eol=auto' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ cd ..