view hgext/gpg.py @ 37631:2f626233859b

wireproto: implement batching on peer executor interface

This is a bit more complicated than non-batch requests because we
need to buffer sends until the last request arrives *and* we need
to support resolving futures as data arrives from the remote.

In a classical concurrent.futures executor model, the future
"starts" as soon as it is submitted. However, we have nothing to
start until the last command is submitted.

If we did nothing, calling result() would deadlock, since the future
hasn't "started." So in the case where we queue the command, we return
a special future type whose result() will trigger sendcommands().
This eliminates the deadlock potential. It also serves as a check
against callers who may be calling result() prematurely, as it will
prevent any subsequent callcommands() from working. This behavior
is slightly annoying and a bit restrictive. But it's the world
that half duplex connections forces on us.

In order to support streaming responses, we were previously using
a generator. But with a futures-based API, we're using futures
and not generators. So in order to get streaming, we need a
background thread to read data from the server.

The approach taken in this patch is to leverage the ThreadPoolExecutor
from concurrent.futures for managing a background thread. We create
an executor and future that resolves when all response data is
processed (or an error occurs). When exiting the context manager,
we wait on that background reading before returning.

I was hoping we could manually spin up a threading.Thread and this
would be simple. But I ran into a few deadlocks when implementing.
After looking at the source code to concurrent.futures, I figured
it would just be easier to use a ThreadPoolExecutor than implement
all the code needed to manually manage a thread.

To prove this works, a use of the batch API in discovery has been
updated.

Differential Revision: https://phab.mercurial-scm.org/D3269

# Copyright 2005, 2006 Benoit Boissinot <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''commands to sign and verify changesets'''

from __future__ import absolute_import

import binascii
import os
import tempfile

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    error,
    match,
    node as hgnode,
    pycompat,
    registrar,
)
from mercurial.utils import (
    dateutil,
    procutil,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

configtable = {}
configitem = registrar.configitem(configtable)

configitem('gpg', 'cmd',
    default='gpg',
)
configitem('gpg', 'key',
    default=None,
)
configitem('gpg', '.*',
    default=None,
    generic=True,
)

class gpg(object):
    def __init__(self, path, key=None):
        self.path = path
        self.key = (key and " --local-user \"%s\"" % key) or ""

    def sign(self, data):
        gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
        return procutil.filter(data, gpgcmd)

    def verify(self, data, sig):
        """ returns of the good and bad signatures"""
        sigfile = datafile = None
        try:
            # create temporary files
            fd, sigfile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".sig")
            fp = os.fdopen(fd, r'wb')
            fp.write(sig)
            fp.close()
            fd, datafile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".txt")
            fp = os.fdopen(fd, r'wb')
            fp.write(data)
            fp.close()
            gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
                      "\"%s\" \"%s\"" % (self.path, sigfile, datafile))
            ret = procutil.filter("", gpgcmd)
        finally:
            for f in (sigfile, datafile):
                try:
                    if f:
                        os.unlink(f)
                except OSError:
                    pass
        keys = []
        key, fingerprint = None, None
        for l in ret.splitlines():
            # see DETAILS in the gnupg documentation
            # filter the logger output
            if not l.startswith("[GNUPG:]"):
                continue
            l = l[9:]
            if l.startswith("VALIDSIG"):
                # fingerprint of the primary key
                fingerprint = l.split()[10]
            elif l.startswith("ERRSIG"):
                key = l.split(" ", 3)[:2]
                key.append("")
                fingerprint = None
            elif (l.startswith("GOODSIG") or
                  l.startswith("EXPSIG") or
                  l.startswith("EXPKEYSIG") or
                  l.startswith("BADSIG")):
                if key is not None:
                    keys.append(key + [fingerprint])
                key = l.split(" ", 2)
                fingerprint = None
        if key is not None:
            keys.append(key + [fingerprint])
        return keys

def newgpg(ui, **opts):
    """create a new gpg instance"""
    gpgpath = ui.config("gpg", "cmd")
    gpgkey = opts.get(r'key')
    if not gpgkey:
        gpgkey = ui.config("gpg", "key")
    return gpg(gpgpath, gpgkey)

def sigwalk(repo):
    """
    walk over every sigs, yields a couple
    ((node, version, sig), (filename, linenumber))
    """
    def parsefile(fileiter, context):
        ln = 1
        for l in fileiter:
            if not l:
                continue
            yield (l.split(" ", 2), (context, ln))
            ln += 1

    # read the heads
    fl = repo.file(".hgsigs")
    for r in reversed(fl.heads()):
        fn = ".hgsigs|%s" % hgnode.short(r)
        for item in parsefile(fl.read(r).splitlines(), fn):
            yield item
    try:
        # read local signatures
        fn = "localsigs"
        for item in parsefile(repo.vfs(fn), fn):
            yield item
    except IOError:
        pass

def getkeys(ui, repo, mygpg, sigdata, context):
    """get the keys who signed a data"""
    fn, ln = context
    node, version, sig = sigdata
    prefix = "%s:%d" % (fn, ln)
    node = hgnode.bin(node)

    data = node2txt(repo, node, version)
    sig = binascii.a2b_base64(sig)
    keys = mygpg.verify(data, sig)

    validkeys = []
    # warn for expired key and/or sigs
    for key in keys:
        if key[0] == "ERRSIG":
            ui.write(_("%s Unknown key ID \"%s\"\n") % (prefix, key[1]))
            continue
        if key[0] == "BADSIG":
            ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
            continue
        if key[0] == "EXPSIG":
            ui.write(_("%s Note: Signature has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        elif key[0] == "EXPKEYSIG":
            ui.write(_("%s Note: This key has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        validkeys.append((key[1], key[2], key[3]))
    return validkeys

@command("sigs", [], _('hg sigs'))
def sigs(ui, repo):
    """list signed changesets"""
    mygpg = newgpg(ui)
    revs = {}

    for data, context in sigwalk(repo):
        node, version, sig = data
        fn, ln = context
        try:
            n = repo.lookup(node)
        except KeyError:
            ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
            continue
        r = repo.changelog.rev(n)
        keys = getkeys(ui, repo, mygpg, data, context)
        if not keys:
            continue
        revs.setdefault(r, [])
        revs[r].extend(keys)
    for rev in sorted(revs, reverse=True):
        for k in revs[rev]:
            r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
            ui.write("%-30s %s\n" % (keystr(ui, k), r))

@command("sigcheck", [], _('hg sigcheck REV'))
def sigcheck(ui, repo, rev):
    """verify all the signatures there may be for a particular revision"""
    mygpg = newgpg(ui)
    rev = repo.lookup(rev)
    hexrev = hgnode.hex(rev)
    keys = []

    for data, context in sigwalk(repo):
        node, version, sig = data
        if node == hexrev:
            k = getkeys(ui, repo, mygpg, data, context)
            if k:
                keys.extend(k)

    if not keys:
        ui.write(_("no valid signature for %s\n") % hgnode.short(rev))
        return

    # print summary
    ui.write(_("%s is signed by:\n") % hgnode.short(rev))
    for key in keys:
        ui.write(" %s\n" % keystr(ui, key))

def keystr(ui, key):
    """associate a string to a key (username, comment)"""
    keyid, user, fingerprint = key
    comment = ui.config("gpg", fingerprint)
    if comment:
        return "%s (%s)" % (user, comment)
    else:
        return user

@command("sign",
         [('l', 'local', None, _('make the signature local')),
          ('f', 'force', None, _('sign even if the sigfile is modified')),
          ('', 'no-commit', None, _('do not commit the sigfile after signing')),
          ('k', 'key', '',
           _('the key id to sign with'), _('ID')),
          ('m', 'message', '',
           _('use text as commit message'), _('TEXT')),
          ('e', 'edit', False, _('invoke editor on commit messages')),
         ] + cmdutil.commitopts2,
         _('hg sign [OPTION]... [REV]...'))
def sign(ui, repo, *revs, **opts):
    """add a signature for the current or given revision

    If no revision is given, the parent of the working directory is used,
    or tip if no revision is checked out.

    The ``gpg.cmd`` config setting can be used to specify the command
    to run. A default key can be specified with ``gpg.key``.

    See :hg:`help dates` for a list of formats valid for -d/--date.
    """
    with repo.wlock():
        return _dosign(ui, repo, *revs, **opts)

def _dosign(ui, repo, *revs, **opts):
    mygpg = newgpg(ui, **opts)
    opts = pycompat.byteskwargs(opts)
    sigver = "0"
    sigmessage = ""

    date = opts.get('date')
    if date:
        opts['date'] = dateutil.parsedate(date)

    if revs:
        nodes = [repo.lookup(n) for n in revs]
    else:
        nodes = [node for node in repo.dirstate.parents()
                 if node != hgnode.nullid]
        if len(nodes) > 1:
            raise error.Abort(_('uncommitted merge - please provide a '
                               'specific revision'))
        if not nodes:
            nodes = [repo.changelog.tip()]

    for n in nodes:
        hexnode = hgnode.hex(n)
        ui.write(_("signing %d:%s\n") % (repo.changelog.rev(n),
                                         hgnode.short(n)))
        # build data
        data = node2txt(repo, n, sigver)
        sig = mygpg.sign(data)
        if not sig:
            raise error.Abort(_("error while signing"))
        sig = binascii.b2a_base64(sig)
        sig = sig.replace("\n", "")
        sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)

    # write it
    if opts['local']:
        repo.vfs.append("localsigs", sigmessage)
        return

    if not opts["force"]:
        msigs = match.exact(repo.root, '', ['.hgsigs'])
        if any(repo.status(match=msigs, unknown=True, ignored=True)):
            raise error.Abort(_("working copy of .hgsigs is changed "),
                             hint=_("please commit .hgsigs manually"))

    sigsfile = repo.wvfs(".hgsigs", "ab")
    sigsfile.write(sigmessage)
    sigsfile.close()

    if '.hgsigs' not in repo.dirstate:
        repo[None].add([".hgsigs"])

    if opts["no_commit"]:
        return

    message = opts['message']
    if not message:
        # we don't translate commit messages
        message = "\n".join(["Added signature for changeset %s"
                             % hgnode.short(n)
                             for n in nodes])
    try:
        editor = cmdutil.getcommiteditor(editform='gpg.sign',
                                         **pycompat.strkwargs(opts))
        repo.commit(message, opts['user'], opts['date'], match=msigs,
                    editor=editor)
    except ValueError as inst:
        raise error.Abort(pycompat.bytestr(inst))

def node2txt(repo, node, ver):
    """map a manifest into some text"""
    if ver == "0":
        return "%s\n" % hgnode.hex(node)
    else:
        raise error.Abort(_("unknown signature version"))