view tests/test-churn.t @ 37631:2f626233859b

wireproto: implement batching on peer executor interface

This is a bit more complicated than non-batch requests because we
need to buffer sends until the last request arrives *and* we need
to support resolving futures as data arrives from the remote.

In a classical concurrent.futures executor model, the future
"starts" as soon as it is submitted. However, we have nothing to
start until the last command is submitted.

If we did nothing, calling result() would deadlock, since the future
hasn't "started." So in the case where we queue the command, we return
a special future type whose result() will trigger sendcommands().
This eliminates the deadlock potential. It also serves as a check
against callers who may be calling result() prematurely, as it will
prevent any subsequent callcommands() from working. This behavior
is slightly annoying and a bit restrictive. But it's the world
that half duplex connections forces on us.

In order to support streaming responses, we were previously using
a generator. But with a futures-based API, we're using futures
and not generators. So in order to get streaming, we need a
background thread to read data from the server.

The approach taken in this patch is to leverage the ThreadPoolExecutor
from concurrent.futures for managing a background thread. We create
an executor and future that resolves when all response data is
processed (or an error occurs). When exiting the context manager,
we wait on that background reading before returning.

I was hoping we could manually spin up a threading.Thread and this
would be simple. But I ran into a few deadlocks when implementing.
After looking at the source code to concurrent.futures, I figured
it would just be easier to use a ThreadPoolExecutor than implement
all the code needed to manually manage a thread.

To prove this works, a use of the batch API in discovery has been
updated.

Differential Revision: https://phab.mercurial-scm.org/D3269

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "churn=" >> $HGRCPATH

create test repository

  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg ci -Am adda -u user1 -d 6:00
  adding a
  $ echo b >> a
  $ echo b > b
  $ hg ci -m changeba -u user2 -d 9:00 a
  $ hg ci -Am addb -u user2 -d 9:30
  adding b
  $ echo c >> a
  $ echo c >> b
  $ echo c > c
  $ hg ci -m changeca -u user3 -d 12:00 a
  $ hg ci -m changecb -u user3 -d 12:15 b
  $ hg ci -Am addc -u user3 -d 12:30
  adding c
  $ mkdir -p d/e
  $ echo abc > d/e/f1.txt
  $ hg ci -Am "add d/e/f1.txt" -u user1 -d 12:45 d/e/f1.txt
  $ mkdir -p d/g
  $ echo def > d/g/f2.txt
  $ hg ci -Am "add d/g/f2.txt" -u user1 -d 13:00 d/g/f2.txt


churn separate directories

  $ cd d
  $ hg churn e
  user1      1 ***************************************************************

churn all

  $ hg churn
  user1      3 ***************************************************************
  user3      3 ***************************************************************
  user2      2 ******************************************

churn excluding one dir

  $ hg churn -X e
  user3      3 ***************************************************************
  user1      2 ******************************************
  user2      2 ******************************************

churn up to rev 2

  $ hg churn -r :2
  user2      2 ***************************************************************
  user1      1 ********************************
  $ cd ..

churn with aliases

  $ cat > ../aliases <<EOF
  > user1 alias1
  > user3 alias3
  > not-an-alias
  > EOF

churn with .hgchurn

  $ mv ../aliases .hgchurn
  $ hg churn
  skipping malformed alias: not-an-alias
  alias1      3 **************************************************************
  alias3      3 **************************************************************
  user2       2 *****************************************
  $ rm .hgchurn

churn with column specifier

  $ COLUMNS=40 hg churn
  user1      3 ***********************
  user3      3 ***********************
  user2      2 ***************

churn by hour

  $ hg churn -f '%H' -s
  06      1 *****************
  09      2 *********************************
  12      4 ******************************************************************
  13      1 *****************


churn with separated added/removed lines

  $ hg rm d/g/f2.txt
  $ hg ci -Am "removed d/g/f2.txt" -u user1 -d 14:00 d/g/f2.txt
  $ hg churn --diffstat
  user1           +3/-1 +++++++++++++++++++++++++++++++++++++++++--------------
  user3           +3/-0 +++++++++++++++++++++++++++++++++++++++++
  user2           +2/-0 +++++++++++++++++++++++++++

churn --diffstat with color

  $ hg --config extensions.color= churn --config color.mode=ansi \
  >     --diffstat --color=always
  user1           +3/-1 \x1b[0;32m+++++++++++++++++++++++++++++++++++++++++\x1b[0m\x1b[0;31m--------------\x1b[0m (esc)
  user3           +3/-0 \x1b[0;32m+++++++++++++++++++++++++++++++++++++++++\x1b[0m (esc)
  user2           +2/-0 \x1b[0;32m+++++++++++++++++++++++++++\x1b[0m (esc)


changeset number churn

  $ hg churn -c
  user1      4 ***************************************************************
  user3      3 ***********************************************
  user2      2 ********************************

  $ echo 'with space = no-space' >> ../aliases
  $ echo a >> a
  $ hg commit -m a -u 'with space' -d 15:00

churn with space in alias

  $ hg churn --aliases ../aliases -r tip
  no-space      1 ************************************************************

  $ cd ..


Issue833: ZeroDivisionError

  $ hg init issue-833
  $ cd issue-833
  $ touch foo
  $ hg ci -Am foo
  adding foo

this was failing with a ZeroDivisionError

  $ hg churn
  test      0 
  $ cd ..

Ignore trailing or leading spaces in emails

  $ cd repo
  $ touch bar
  $ hg ci -Am'bar' -u 'user4 <[e-mail]>'
  adding bar
  $ touch foo
  $ hg ci -Am'foo' -u 'user4 < [e-mail] >'
  adding foo
  $ hg log -l2 --template '[{author|email}]\n'
  [ [e-mail] ]
  [[e-mail]]
  $ hg churn -c
  user1            4 *********************************************************
  user3            3 *******************************************
  user2            2 *****************************
  [e-mail]      2 *****************************
  with space       1 **************

Test multibyte sequences in names

  $ echo bar >> bar
  $ hg --encoding utf-8 ci -m'changed bar' -u 'El Niño <[e-mail]>'
  $ hg --encoding utf-8 churn -ct '{author|person}'
  user1           4 **********************************************************
  user3           3 ********************************************
  user2           2 *****************************
  user4           2 *****************************
  El Ni\xc3\xb1o         1 *************** (esc)
  with space      1 ***************

Test --template argument, with backwards compatibility

  $ hg churn -t '{author|user}'
  user1      4 ***************************************************************
  user3      3 ***********************************************
  user2      2 ********************************
  nino       1 ****************
  with       1 ****************
             0 
  user4      0 
  $ hg churn -T '{author|user}'
  user1      4 ***************************************************************
  user3      3 ***********************************************
  user2      2 ********************************
  nino       1 ****************
  with       1 ****************
             0 
  user4      0 
  $ hg churn -t 'alltogether'
  alltogether     11 *********************************************************
  $ hg churn -T 'alltogether'
  alltogether     11 *********************************************************

  $ cd ..