view tests/test-import-eol.t @ 37631:2f626233859b

wireproto: implement batching on peer executor interface

This is a bit more complicated than non-batch requests because we
need to buffer sends until the last request arrives *and* we need
to support resolving futures as data arrives from the remote.

In a classical concurrent.futures executor model, the future
"starts" as soon as it is submitted. However, we have nothing to
start until the last command is submitted.

If we did nothing, calling result() would deadlock, since the future
hasn't "started." So in the case where we queue the command, we return
a special future type whose result() will trigger sendcommands().
This eliminates the deadlock potential. It also serves as a check
against callers who may be calling result() prematurely, as it will
prevent any subsequent callcommands() from working. This behavior
is slightly annoying and a bit restrictive. But it's the world
that half duplex connections forces on us.

In order to support streaming responses, we were previously using
a generator. But with a futures-based API, we're using futures
and not generators. So in order to get streaming, we need a
background thread to read data from the server.

The approach taken in this patch is to leverage the ThreadPoolExecutor
from concurrent.futures for managing a background thread. We create
an executor and future that resolves when all response data is
processed (or an error occurs). When exiting the context manager,
we wait on that background reading before returning.

I was hoping we could manually spin up a threading.Thread and this
would be simple. But I ran into a few deadlocks when implementing.
After looking at the source code to concurrent.futures, I figured
it would just be easier to use a ThreadPoolExecutor than implement
all the code needed to manually manage a thread.

To prove this works, a use of the batch API in discovery has been
updated.

Differential Revision: https://phab.mercurial-scm.org/D3269

  $ cat > makepatch.py <<EOF
  > import sys
  > f = open(sys.argv[2], 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-bbb\r\n')
  > w(b'+yyyy\r\n')
  > w(b' cc\r\n')
  > w({'empty:lf': b' \n',
  >    'empty:crlf': b' \r\n',
  >    'empty:stripped-lf': b'\n',
  >    'empty:stripped-crlf': b'\r\n'}[sys.argv[1]])
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\ No newline at end of file\r\n')
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore


Test different --eol values

  $ $PYTHON -c 'open("a", "wb").write(b"a\nbbb\ncc\n\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ $PYTHON ../makepatch.py empty:lf eol.diff
  $ $PYTHON ../makepatch.py empty:crlf eol-empty-crlf.diff
  $ $PYTHON ../makepatch.py empty:stripped-lf eol-empty-stripped-lf.diff
  $ $PYTHON ../makepatch.py empty:stripped-crlf eol-empty-stripped-crlf.diff

invalid eol

  $ hg --config patch.eol='LFCR' import eol.diff
  applying eol.diff
  abort: unsupported line endings type: LFCR
  [255]
  $ hg revert -a


force LF

  $ hg --traceback --config patch.eol='LF' import eol.diff
  applying eol.diff
  $ hg id
  9e4ef7b3d4af tip
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st

 (test empty-line variants: all of them should generate the same revision)

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-crlf.diff
  applying eol-empty-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-lf.diff
  applying eol-empty-stripped-lf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-crlf.diff
  applying eol-empty-stripped-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

force CRLF

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='CRLF' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on LF file

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st


auto EOL on CRLF file

  $ $PYTHON -c 'open("a", "wb").write(b"a\r\nbbb\r\ncc\r\n\r\nd\r\ne")'
  $ hg commit -m 'switch EOLs in a'
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on new file or source without any EOL

  $ $PYTHON -c 'open("noeol", "wb").write(b"noeol")'
  $ hg add noeol
  $ hg commit -m 'add noeol'
  $ $PYTHON -c 'open("noeol", "wb").write(b"noeol\r\nnoeol\n")'
  $ $PYTHON -c 'open("neweol", "wb").write(b"neweol\nneweol\r\n")'
  $ hg add neweol
  $ hg diff --git > noeol.diff
  $ hg revert --no-backup noeol neweol
  $ rm neweol
  $ hg --traceback --config patch.eol='auto' import -m noeol noeol.diff
  applying noeol.diff
  $ cat noeol
  noeol\r (esc)
  noeol
  $ cat neweol
  neweol
  neweol\r (esc)
  $ hg st


Test --eol and binary patches

  $ $PYTHON -c 'open("b", "wb").write(b"a\x00\nb\r\nd")'
  $ hg ci -Am addb
  adding b
  $ $PYTHON -c 'open("b", "wb").write(b"a\x00\nc\r\nd")'
  $ hg diff --git > bin.diff
  $ hg revert --no-backup b

binary patch with --eol

  $ hg import --config patch.eol='CRLF' -m changeb bin.diff
  applying bin.diff
  $ cat b
  a\x00 (esc)
  c\r (esc)
  d (no-eol)
  $ hg st
  $ cd ..