view tests/test-treediscovery.t @ 37631:2f626233859b

wireproto: implement batching on peer executor interface

This is a bit more complicated than non-batch requests because we
need to buffer sends until the last request arrives *and* we need
to support resolving futures as data arrives from the remote.

In a classical concurrent.futures executor model, the future
"starts" as soon as it is submitted. However, we have nothing to
start until the last command is submitted.

If we did nothing, calling result() would deadlock, since the future
hasn't "started." So in the case where we queue the command, we return
a special future type whose result() will trigger sendcommands().
This eliminates the deadlock potential. It also serves as a check
against callers who may be calling result() prematurely, as it will
prevent any subsequent callcommands() from working. This behavior
is slightly annoying and a bit restrictive. But it's the world
that half duplex connections forces on us.

In order to support streaming responses, we were previously using
a generator. But with a futures-based API, we're using futures
and not generators. So in order to get streaming, we need a
background thread to read data from the server.

The approach taken in this patch is to leverage the ThreadPoolExecutor
from concurrent.futures for managing a background thread. We create
an executor and future that resolves when all response data is
processed (or an error occurs). When exiting the context manager,
we wait on that background reading before returning.

I was hoping we could manually spin up a threading.Thread and this
would be simple. But I ran into a few deadlocks when implementing.
After looking at the source code to concurrent.futures, I figured
it would just be easier to use a ThreadPoolExecutor than implement
all the code needed to manually manage a thread.

To prove this works, a use of the batch API in discovery has been
updated.

Differential Revision: https://phab.mercurial-scm.org/D3269

#require killdaemons

Tests discovery against servers without getbundle support:

  $ CAP="getbundle bundle2"
  $ . "$TESTDIR/notcapable"
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > logtemplate="{rev} {node|short}: {desc} {branches}\n"
  > EOF

Setup HTTP server control:

  $ remote=http://localhost:$HGPORT/
  $ export remote
  $ tstart() {
  >   echo '[web]' > $1/.hg/hgrc
  >   echo 'push_ssl = false' >> $1/.hg/hgrc
  >   echo 'allow_push = *' >> $1/.hg/hgrc
  >   hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
  >   cat hg.pid >> $DAEMON_PIDS
  > }
  $ tstop() {
  >   killdaemons.py
  >   [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log
  >   rm access.log errors.log
  > }

Both are empty:

  $ hg init empty1
  $ hg init empty2
  $ tstart empty2
  $ hg incoming -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg outgoing -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull -R empty1 $remote
  pulling from http://localhost:$HGPORT/
  no changes found
  $ hg push -R empty1 $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ tstop

Base repo:

  $ hg init main
  $ cd main
  $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
  $ hg log -G
  o  11 a19bfa7e7328: r11 both
  |
  o  10 8b6bad1512e1: r10 both
  |
  o    9 025829e08038: r9 both
  |\
  | o  8 d8f638ac69e9: r8 name2
  | |
  | o  7 b6b4d315a2ac: r7 name2
  | |
  | o  6 6c6f5d5f3c11: r6 name2
  | |
  | o  5 70314b29987d: r5 name2
  | |
  o |  4 e71dbbc70e03: r4 name1
  | |
  o |  3 2c8d5d5ec612: r3 name1
  | |
  o |  2 a7892891da29: r2 name1
  |/
  o  1 0019a3b924fd: r1
  |
  o  0 d57206cc072a: r0
  
  $ cd ..
  $ tstart main

Full clone:

  $ hg clone main full
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd full
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is empty:

  $ cd empty1
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 12 changesets with 24 changes to 2 files
  new changesets d57206cc072a:a19bfa7e7328
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is subset:

  $ hg clone main subset --rev name2 ; cd subset
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  new changesets d57206cc072a:d8f638ac69e9
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  new changesets a7892891da29:a19bfa7e7328
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Remote is empty:

  $ tstart empty2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 12 changesets with 24 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Local is superset:

  $ hg clone main subset2 --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  new changesets d57206cc072a:d8f638ac69e9
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ tstart subset2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: push creates new remote branches: both, name1!
  (use 'hg push --new-branch' to create new remote branches)
  [255]
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 6 changesets with 12 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Partial pull:

  $ tstart main
  $ hg clone $remote partial --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  new changesets d57206cc072a:d8f638ac69e9
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd partial
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg incoming $remote --rev name1
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg pull $remote --rev name1
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  new changesets a7892891da29:e71dbbc70e03
  (run 'hg heads' to see heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ cd ..
  $ tstop

Both have new stuff in new named branches:

  $ hg clone main repo1a --rev name1 -q
  $ hg clone repo1a repo1b -q
  $ hg clone main repo2a --rev name2 -q
  $ hg clone repo2a repo2b -q
  $ tstart repo1a

  $ cd repo2a
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 70314b29987d: r5 name2
  3 6c6f5d5f3c11: r6 name2
  4 b6b4d315a2ac: r7 name2
  5 d8f638ac69e9: r8 name2
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 8 changes to 2 files (+1 heads)
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  new changesets a7892891da29:e71dbbc70e03
  (run 'hg heads' to see heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

  $ tstart repo1b
  $ cd repo2b
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 70314b29987d: r5 name2
  3 6c6f5d5f3c11: r6 name2
  4 b6b4d315a2ac: r7 name2
  5 d8f638ac69e9: r8 name2
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  new changesets a7892891da29:e71dbbc70e03
  (run 'hg heads' to see heads)
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 8 changes to 2 files (+1 heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Both have new stuff in existing named branches:

  $ rm -r repo1a repo1b repo2a repo2b
  $ hg clone main repo1a --rev 3 --rev 8 -q
  $ hg clone repo1a repo1b -q
  $ hg clone main repo2a --rev 4 --rev 7 -q
  $ hg clone repo2a repo2b -q
  $ tstart repo1a

  $ cd repo2a
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  8 d8f638ac69e9: r8 name2
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  4 e71dbbc70e03: r4 name1
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 2 changes to 2 files
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  new changesets d8f638ac69e9
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

  $ tstart repo1b
  $ cd repo2b
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  8 d8f638ac69e9: r8 name2
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  4 e71dbbc70e03: r4 name1
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  new changesets d8f638ac69e9
  (run 'hg update' to get a working copy)
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 2 changes to 2 files
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
#if zstd
  $ tstop show
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
#else
  $ tstop show
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
#endif