view mercurial/error.py @ 39496:2f9f7889549b

snapshot: introduce an intermediate `_refinedgroups` generator

This method will be used to improve the search for a good snapshot base. To
keep things simpler, we introduce the necessary function before doing any
delta base logic change. The next handful of commits will focus on refactoring
the code to let that new logic land as clearly as possible.

# General Idea

Right now, the search for a good delta base stop whenever we found a good one.
However, when using sparse-revlog, we should probably try a bit harder.

We do significant effort to increase delta re-use by jumping on "unrelated"
delta chains that provide better results. Moving to another chain for a better
result is good, but we have no guarantee we jump at a reasonable point in that
new chain. When we consider over the chains related to the parents, we start
from the higher-level snapshots. This is a way to consider the snapshot closer
to the current revision that has the best chance to produce a small delta. We
do benefit from this walk order when jumping to a better "unrelated" stack.

To counter-balance this, we'll introduce a way to "refine" the result. After a
good delta have been found, we'll keep searching for a better delta, using the
current best one as a starting point.

# Target Setup

The `finddeltainfo` method is responsible for the general search for a good
delta. It requests candidates base from `_candidategroups` and decides which
one are usable.

The `_candidategroups` generator act as a top-level filter, it does not care
about how we pick candidates, it just does basic filtering, excluding
revisions that have been tested already or that are an obvious misfit.

The `_rawgroups` generator is the one with the actual ancestors walking logic,
It does not care about what would do a good delta and what was already tested,
it just issues the initial candidates.

We introduce a new `_refinedgroup` function to bridge the gap between
`_candidategroups` and `_rawgroups`. It delegates the initial iteration logic
and then performing relevant refining of the valid base once found. (This
logic is yet to be added to function)

All these logics are fairly independent and easier to understand when standing
alone, not mixed with each other. It also makes it easy to test and try
different approaches for one of those four layers without affecting the other
ones.

# Technical details

To communicate `finddeltainfo` choice of "current best delta base" to the
`_refinegroup` logic, we plan to use python co-routine feature. The
`_candidategroups` and `_refinegroup` generators will become co-routine. This
will allow `_refinegroup` to detect when a good delta have been found and
triggers various refining steps.

For now, `_candidategroups` will just pass the value down the stack.

After poking at various option, the co-routine appears the best to keep each
layers focus on its duty, without the need to spread implementation details
across layers.

# error.py - Mercurial exceptions
#
# Copyright 2005-2008 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""Mercurial exceptions.

This allows us to catch exceptions at higher levels without forcing
imports.
"""

from __future__ import absolute_import

# Do not import anything but pycompat here, please
from . import pycompat

def _tobytes(exc):
    """Byte-stringify exception in the same way as BaseException_str()"""
    if not exc.args:
        return b''
    if len(exc.args) == 1:
        return pycompat.bytestr(exc.args[0])
    return b'(%s)' % b', '.join(b"'%s'" % pycompat.bytestr(a) for a in exc.args)

class Hint(object):
    """Mix-in to provide a hint of an error

    This should come first in the inheritance list to consume a hint and
    pass remaining arguments to the exception class.
    """
    def __init__(self, *args, **kw):
        self.hint = kw.pop(r'hint', None)
        super(Hint, self).__init__(*args, **kw)

class RevlogError(Hint, Exception):
    __bytes__ = _tobytes

class FilteredIndexError(IndexError):
    __bytes__ = _tobytes

class LookupError(RevlogError, KeyError):
    def __init__(self, name, index, message):
        self.name = name
        self.index = index
        # this can't be called 'message' because at least some installs of
        # Python 2.6+ complain about the 'message' property being deprecated
        self.lookupmessage = message
        if isinstance(name, bytes) and len(name) == 20:
            from .node import short
            name = short(name)
        RevlogError.__init__(self, '%s@%s: %s' % (index, name, message))

    def __bytes__(self):
        return RevlogError.__bytes__(self)

    def __str__(self):
        return RevlogError.__str__(self)

class AmbiguousPrefixLookupError(LookupError):
    pass

class FilteredLookupError(LookupError):
    pass

class ManifestLookupError(LookupError):
    pass

class CommandError(Exception):
    """Exception raised on errors in parsing the command line."""
    __bytes__ = _tobytes

class InterventionRequired(Hint, Exception):
    """Exception raised when a command requires human intervention."""
    __bytes__ = _tobytes

class Abort(Hint, Exception):
    """Raised if a command needs to print an error and exit."""
    __bytes__ = _tobytes

class HookLoadError(Abort):
    """raised when loading a hook fails, aborting an operation

    Exists to allow more specialized catching."""

class HookAbort(Abort):
    """raised when a validation hook fails, aborting an operation

    Exists to allow more specialized catching."""

class ConfigError(Abort):
    """Exception raised when parsing config files"""

class UpdateAbort(Abort):
    """Raised when an update is aborted for destination issue"""

class MergeDestAbort(Abort):
    """Raised when an update is aborted for destination issues"""

class NoMergeDestAbort(MergeDestAbort):
    """Raised when an update is aborted because there is nothing to merge"""

class ManyMergeDestAbort(MergeDestAbort):
    """Raised when an update is aborted because destination is ambiguous"""

class ResponseExpected(Abort):
    """Raised when an EOF is received for a prompt"""
    def __init__(self):
        from .i18n import _
        Abort.__init__(self, _('response expected'))

class OutOfBandError(Hint, Exception):
    """Exception raised when a remote repo reports failure"""
    __bytes__ = _tobytes

class ParseError(Hint, Exception):
    """Raised when parsing config files and {rev,file}sets (msg[, pos])"""
    __bytes__ = _tobytes

class PatchError(Exception):
    __bytes__ = _tobytes

class UnknownIdentifier(ParseError):
    """Exception raised when a {rev,file}set references an unknown identifier"""

    def __init__(self, function, symbols):
        from .i18n import _
        ParseError.__init__(self, _("unknown identifier: %s") % function)
        self.function = function
        self.symbols = symbols

class RepoError(Hint, Exception):
    __bytes__ = _tobytes

class RepoLookupError(RepoError):
    pass

class FilteredRepoLookupError(RepoLookupError):
    pass

class CapabilityError(RepoError):
    pass

class RequirementError(RepoError):
    """Exception raised if .hg/requires has an unknown entry."""

class StdioError(IOError):
    """Raised if I/O to stdout or stderr fails"""

    def __init__(self, err):
        IOError.__init__(self, err.errno, err.strerror)

    # no __bytes__() because error message is derived from the standard IOError

class UnsupportedMergeRecords(Abort):
    def __init__(self, recordtypes):
        from .i18n import _
        self.recordtypes = sorted(recordtypes)
        s = ' '.join(self.recordtypes)
        Abort.__init__(
            self, _('unsupported merge state records: %s') % s,
            hint=_('see https://mercurial-scm.org/wiki/MergeStateRecords for '
                   'more information'))

class UnknownVersion(Abort):
    """generic exception for aborting from an encounter with an unknown version
    """

    def __init__(self, msg, hint=None, version=None):
        self.version = version
        super(UnknownVersion, self).__init__(msg, hint=hint)

class LockError(IOError):
    def __init__(self, errno, strerror, filename, desc):
        IOError.__init__(self, errno, strerror, filename)
        self.desc = desc

    # no __bytes__() because error message is derived from the standard IOError

class LockHeld(LockError):
    def __init__(self, errno, filename, desc, locker):
        LockError.__init__(self, errno, 'Lock held', filename, desc)
        self.locker = locker

class LockUnavailable(LockError):
    pass

# LockError is for errors while acquiring the lock -- this is unrelated
class LockInheritanceContractViolation(RuntimeError):
    __bytes__ = _tobytes

class ResponseError(Exception):
    """Raised to print an error with part of output and exit."""
    __bytes__ = _tobytes

class UnknownCommand(Exception):
    """Exception raised if command is not in the command table."""
    __bytes__ = _tobytes

class AmbiguousCommand(Exception):
    """Exception raised if command shortcut matches more than one command."""
    __bytes__ = _tobytes

# derived from KeyboardInterrupt to simplify some breakout code
class SignalInterrupt(KeyboardInterrupt):
    """Exception raised on SIGTERM and SIGHUP."""

class SignatureError(Exception):
    __bytes__ = _tobytes

class PushRaced(RuntimeError):
    """An exception raised during unbundling that indicate a push race"""
    __bytes__ = _tobytes

class ProgrammingError(Hint, RuntimeError):
    """Raised if a mercurial (core or extension) developer made a mistake"""
    __bytes__ = _tobytes

class WdirUnsupported(Exception):
    """An exception which is raised when 'wdir()' is not supported"""
    __bytes__ = _tobytes

# bundle2 related errors
class BundleValueError(ValueError):
    """error raised when bundle2 cannot be processed"""
    __bytes__ = _tobytes

class BundleUnknownFeatureError(BundleValueError):
    def __init__(self, parttype=None, params=(), values=()):
        self.parttype = parttype
        self.params = params
        self.values = values
        if self.parttype is None:
            msg = 'Stream Parameter'
        else:
            msg = parttype
        entries = self.params
        if self.params and self.values:
            assert len(self.params) == len(self.values)
            entries = []
            for idx, par in enumerate(self.params):
                val = self.values[idx]
                if val is None:
                    entries.append(val)
                else:
                    entries.append("%s=%r" % (par, pycompat.maybebytestr(val)))
        if entries:
            msg = '%s - %s' % (msg, ', '.join(entries))
        ValueError.__init__(self, msg)

class ReadOnlyPartError(RuntimeError):
    """error raised when code tries to alter a part being generated"""
    __bytes__ = _tobytes

class PushkeyFailed(Abort):
    """error raised when a pushkey part failed to update a value"""

    def __init__(self, partid, namespace=None, key=None, new=None, old=None,
                 ret=None):
        self.partid = partid
        self.namespace = namespace
        self.key = key
        self.new = new
        self.old = old
        self.ret = ret
        # no i18n expected to be processed into a better message
        Abort.__init__(self, 'failed to update value for "%s/%s"'
                       % (namespace, key))

class CensoredNodeError(RevlogError):
    """error raised when content verification fails on a censored node

    Also contains the tombstone data substituted for the uncensored data.
    """

    def __init__(self, filename, node, tombstone):
        from .node import short
        RevlogError.__init__(self, '%s:%s' % (filename, short(node)))
        self.tombstone = tombstone

class CensoredBaseError(RevlogError):
    """error raised when a delta is rejected because its base is censored

    A delta based on a censored revision must be formed as single patch
    operation which replaces the entire base with new content. This ensures
    the delta may be applied by clones which have not censored the base.
    """

class InvalidBundleSpecification(Exception):
    """error raised when a bundle specification is invalid.

    This is used for syntax errors as opposed to support errors.
    """
    __bytes__ = _tobytes

class UnsupportedBundleSpecification(Exception):
    """error raised when a bundle specification is not supported."""
    __bytes__ = _tobytes

class CorruptedState(Exception):
    """error raised when a command is not able to read its state from file"""
    __bytes__ = _tobytes

class PeerTransportError(Abort):
    """Transport-level I/O error when communicating with a peer repo."""

class InMemoryMergeConflictsError(Exception):
    """Exception raised when merge conflicts arose during an in-memory merge."""
    __bytes__ = _tobytes